user/sven/linux.git/include/linux/mtd, branch v5.15.8

Merge tag 'mtd/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2021-07-05T18:21:51Z

Pull MTD updates from Richard Weinberger: "MTD core changes: - Convert list_for_each to entry variant - Use MTD_DEVICE_ATTR_RO/RW() helper macros - Remove unnecessary OOM messages - Potential NULL dereference in mtd_otp_size() - Fix freeing of otp_info buffer - Create partname and partid debug files for child MTDs - tests: - Remove redundant assignment to err - Fix error return code in mtd_oobtest_init() - Add OTP NVMEM provider support - Allow specifying of_node - Convert sysfs sprintf/snprintf family to sysfs_emit Bindings changes: - Convert ti,am654-hbmc.txt to YAML schema - spi-nor: add otp property - Add OTP bindings - add YAML schema for the generic MTD bindings - Add brcm,trx-magic MTD device drivers changes: - Add support for microchip 48l640 EERAM - Remove superfluous "break" - sm_ftl: - Fix alignment of block comment - nftl: - Return -ENOMEM when kmalloc failed - nftlcore: - Remove set but rewrite variables - phram: - Fix error return code in phram_setup() - plat-ram: - Remove redundant dev_err call in platram_probe() MTD parsers changes: - Qcom: - Fix leaking of partition name - Redboot: - Fix style issues - Seek fis-index-block in the right node - trx: - Allow to use TRX parser on Mediatek SoCs - Allow to specify brcm, trx-magic in DT Raw NAND core: - Allow SDR timings to be nacked - Bring support for NV-DDR timings which involved a number of small preparation changes to bring new helpers, properly introduce NV-DDR structures, fill them, differenciate them and pick the best timing set. - Add the necessary infrastructure to parse the new gpio-cs property which aims at enlarging the number of available CS when a hardware controller is too constrained. - Update dead URL - Silence static checker warning in nand_setup_interface() - BBT: - Fix corner case in bad block table handling - onfi: - Use more recent ONFI specification wording - Use the BIT() macro when possible Raw NAND controller drivers: - Atmel: - Ensure the data interface is supported. - Arasan: - Finer grain NV-DDR configuration - Rename the data interface register - Use the right DMA mask - Leverage additional GPIO CS - Ensure proper configuration for the asserted target - Add support for the NV-DDR interface - Fix a macro parameter - brcmnand: - Convert bindings to json-schema - OMAP: - Various fixes and style improvements - Add larger page NAND chips support - PL35X: - New driver - QCOM: - Avoid writing to obsolete register - Delete an unneeded bool conversion - Allow override of partition parser - Marvell: - Minor documentation correction - Add missing clk_disable_unprepare() on error in marvell_nfc_resume() - R852: - Use DEVICE_ATTR_RO() helper macro - MTK: - Remove redundant dev_err call in mtk_ecc_probe() - HISI504: - Remove redundant dev_err call in probe SPI-NAND core: - Light reorganisation for the introduction of a core resume handler - Fix double counting of ECC stats SPI-NAND manufacturer drivers: - Macronix: - Add support for serial NAND flash SPI NOR core changes: - Ability to dump SFDP tables via sysfs - Support for erasing OTP regions on Winbond and similar flashes - Few API doc updates and fixes - Locking support for MX25L12805D SPI NOR controller drivers changes: - Use SPI_MODE_X_MASK in nxp-spifi - Intel Alder Lake-M SPI serial flash support" * tag 'mtd/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (125 commits) mtd: spi-nor: remove redundant continue statement mtd: rawnand: omap: Add larger page NAND chips support mtd: rawnand: omap: Various style fixes mtd: rawnand: omap: Check return values mtd: rawnand: omap: Rename a macro mtd: rawnand: omap: Aggregate the HW configuration of the ELM mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller dt-bindings: mtd: pl353-nand: Describe this hardware controller MAINTAINERS: Add PL353 NAND controller entry mtd: rawnand: qcom: avoid writing to obsolete register mtd: rawnand: marvell: Minor documentation correction mtd: rawnand: r852: use DEVICE_ATTR_RO() helper macro mtd: spinand: add SPI-NAND MTD resume handler mtd: spinand: Add spinand_init_flash() helper mtd: spinand: add spinand_read_cfg() helper mtd: rawnand: marvell: add missing clk_disable_unprepare() on error in marvell_nfc_resume() mtd: rawnand: arasan: Finer grain NV-DDR configuration mtd: rawnand: arasan: Rename the data interface register mtd: rawnand: onfi: Fix endianness when reading NV-DDR values mtd: rawnand: arasan: Use the right DMA mask ...

Merge tag 'spi-nor/for-5.14' into mtd/next

2021-06-30T10:52:24Z

SPI NOR core changes: - Ability to dump SFDP tables via sysfs - Support for erasing OTP regions on Winbond and similar flashes - Few API doc updates and fixes - Locking support for MX25L12805D SPI NOR controller drivers changes: - Use SPI_MODE_X_MASK in nxp-spifi - Intel Alder Lake-M SPI serial flash support

Merge tag 'nand/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

2021-06-29T21:01:39Z

Raw NAND core: * Allow SDR timings to be nacked * Bring support for NV-DDR timings which involved a number of small preparation changes to bring new helpers, properly introduce NV-DDR structures, fill them, differenciate them and pick the best timing set. * Add the necessary infrastructure to parse the new gpio-cs property which aims at enlarging the number of available CS when a hardware controller is too constrained. * Update dead URL * Silence static checker warning in nand_setup_interface() * BBT: - Fix corner case in bad block table handling * onfi: - Use more recent ONFI specification wording - Use the BIT() macro when possible Raw NAND controller drivers: * Atmel: - Ensure the data interface is supported. * Arasan: - Finer grain NV-DDR configuration - Rename the data interface register - Use the right DMA mask - Leverage additional GPIO CS - Ensure proper configuration for the asserted target - Add support for the NV-DDR interface - Fix a macro parameter * brcmnand: - Convert bindings to json-schema * OMAP: - Various fixes and style improvements - Add larger page NAND chips support * PL35X: - New driver * QCOM: - Avoid writing to obsolete register - Delete an unneeded bool conversion - Allow override of partition parser * Marvell: - Minor documentation correction - Add missing clk_disable_unprepare() on error in marvell_nfc_resume() * R852: - Use DEVICE_ATTR_RO() helper macro * MTK: - Remove redundant dev_err call in mtk_ecc_probe() * HISI504: - Remove redundant dev_err call in probe SPI-NAND core: * Light reorganisation for the introduction of a core resume handler * Fix double counting of ECC stats SPI-NAND manufacturer drivers: * Macronix: - Add support for serial NAND flash

mtd: spi-nor: sfdp: save a copy of the SFDP data

2021-06-15T17:48:31Z

Due to possible mode switching to 8D-8D-8D, it might not be possible to read the SFDP after the initial probe. To be able to dump the SFDP via sysfs afterwards, make a complete copy of it. Signed-off-by: Michael Walle Signed-off-by: Vignesh Raghavendra Tested-by: Heiko Thiery Reviewed-by: Pratyush Yadav

mtd: spinand: use the spi-mem poll status APIs

2021-06-03T13:04:57Z

Make use of spi-mem poll status APIs to let advanced controllers optimize wait operations. This should also fix the high CPU usage for system that don't have a dedicated STATUS poll block logic. Signed-off-by: Patrice Chotard Signed-off-by: Christophe Kerello Reviewed-by: Boris Brezillon Acked-by: Miquel Raynal Link: https://lore.kernel.org/r/20210518162754.15940-3-patrice.chotard@foss.st.com Signed-off-by: Mark Brown

mtd: rawnand: Add a helper to parse the gpio-cs DT property

2021-05-26T14:26:32Z

New chips may feature a lot of CS because of their extended length. As many controllers have been designed a decade ago, they usually only feature just a couple. This does not mean that the entire range of these chips cannot be accessed: it is just a matter of adding more GPIO CS in the hardware design. A DT property has been added to describe the CS array: cs-gpios. Here is the code parsing it this new property, allocating what needs to be, requesting the GPIOs and returning an array with the additional available CS. The first entries of this array are left empty and are reserved for native CS. Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20210526093242.183847-3-miquel.raynal@bootlin.com

mtd: rawnand: Move struct gpio_desc declaration to the top

2021-05-26T14:26:30Z

The struct gpio_desc is declared in the middle of the rawnand.h header, right before the first function using it (nand_gpio_waitrdy). Before adding a new function and to make it clear: move the declaration to the top of the file. Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20210526093242.183847-2-miquel.raynal@bootlin.com

mtd: rawnand: Support enabling NV-DDR through SET_FEATURES

2021-05-26T08:51:00Z

Until now the parameter of the ADDR_TIMING_MODE feature was just the ONFI timing mode (from 0 to 5) because we were only supporting the SDR data interface. In the same byte, bits 4 and 5 indicate which data interface is being configured so use them to set the right mode and also read them back to ensure the right timing has been setup on the chip's side. Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-17-miquel.raynal@bootlin.com

mtd: rawnand: Access SDR and NV-DDR timings through a common macro

2021-05-26T08:43:54Z

Most timings related to the bus timings are different between SDR and NV-DDR. However, we identified 9 individual timings which are more related to the NAND chip internals. These are common between the two interface types. Fortunately, only these common timings are being shared through the NAND core and its ->exec_op() interface, which allows the writing of a simple macro checking the interface type and depending on it, returning either the relevant SDR timing or the NV-DDR timing. This is the purpose of the NAND_COMMON_TIMING_PS() macro. As all this is evaluated at build time, one will immediately be notified in case a non common timing is being accessed through this macro. Two handy macros are also inserted at the same time, which use PSEC_TO_NSEC or PSEC_TO_MSEC so that it is very easy to return timings in milli-, nano- or pico-seconds, as usually requested by the internal API. Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-14-miquel.raynal@bootlin.com

mtd: rawnand: Add onfi_fill_nvddr_interface_config() helper

2021-05-26T08:43:50Z

Same logic as for the SDR path, let's create a onfi_fill_nvddr_interface_config() helper to fill an interface configuration structure with NV-DDR timings, given a specific ONFI mode. There is one additional thing to do compared to SDR mode: tCAD timing can be fast or slow and this depends on an ONFI parameter page bit. By default the slow value is declared in the timings structure definition, but this helper can shrink it down if necessary. Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-12-miquel.raynal@bootlin.com