user/sven/linux.git/include/linux/mtd, branch v5.18.19

mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N

2022-06-09T08:30:49Z

commit 0a8e98305f63deaf0a799d5cf5532cc83af035d1 upstream. Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") buffered writes fail on S29GL064N. This is because, on S29GL064N, reads return 0xFF at the end of DQ polling for write completion, where as, chip_good() check expects actual data written to the last location to be returned post DQ polling completion. Fix is to revert to using chip_good() for S29GL064N which only checks for DQ lines to settle down to determine write completion. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Cc: stable@vger.kernel.org Signed-off-by: Tokunori Ikegami Acked-by: Vignesh Raghavendra Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com Signed-off-by: Greg Kroah-Hartman

mtd: fix 'part' field data corruption in mtd_info

2022-04-21T07:29:05Z

Commit 46b5889cc2c5 ("mtd: implement proper partition handling") started using "mtd_get_master_ofs()" in mtd callbacks to determine memory offsets by means of 'part' field from mtd_info, what previously was smashed accessing 'master' field in the mtd_set_dev_defaults() method. That provides wrong offset what causes hardware access errors. Just make 'part', 'master' as separate fields, rather than using union type to avoid 'part' data corruption when mtd_set_dev_defaults() is called. Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling") Signed-off-by: Oleksandr Ocheretnyi Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220417184649.449289-1-oocheret@cisco.com

Merge tag 'nand/for-5.18' into mtd/next

2022-03-23T17:08:03Z

Raw NAND core changes: * Rework of_get_nand_bus_width() * Remove of_get_nand_on_flash_bbt() wrapper * Protect access to rawnand devices while in suspend * bindings: Document the wp-gpios property Rax NAND controller driver changes: * atmel: Fix refcount issue in atmel_nand_controller_init * nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc * rockchip: Fix platform_get_irq.cocci warning * stm32_fmc2: Add NAND Write Protect support * pl353: Set the nand chip node as the flash node * brcmnand: Fix sparse warnings in bcma_nand * omap_elm: Remove redundant variable 'errors' * gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting * brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: * Check for error irq Signed-off-by: Miquel Raynal

Merge tag 'spi-nor/for-5.18' into mtd/next

2022-03-18T19:14:42Z

SPI NOR core changes: - move vendor specific code out of the core into vendor drivers. - unify all function and object names in the vendor modules. - make setup() callback optional to improve readability. - skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. Signed-off-by: Miquel Raynal

mtd: core: Remove partid and partname debugfs files

2022-03-14T16:01:58Z

partid and partname debugfs files were used just by SPI NOR, but they were replaced by sysfs entries. Since these debugfs files are no longer used in mtd, remove dead code. The directory is kept as it is used by nandsim, mtdswap and docg3. Signed-off-by: Tudor Ambarus Reviewed-by: Pratyush Yadav Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220225144656.634682-1-tudor.ambarus@microchip.com

mtd: spi-nor: move all spansion specifics into spansion.c

2022-02-25T16:12:49Z

The clear status register flags is only available on spansion flashes. Move all the functions around that into the spanion module. Signed-off-by: Michael Walle Signed-off-by: Tudor Ambarus Tested-by: Pratyush Yadav # on mt35xu512aba, s28hs512t Reviewed-by: Pratyush Yadav Link: https://lore.kernel.org/r/20220223134358.1914798-29-michael@walle.cc

mtd: spi-nor: move all micron-st specifics into micron-st.c

2022-02-25T16:12:19Z

The flag status register is only available on micron flashes. Move all the functions around that into the micron module. This is almost a mechanical move except for the spi_nor_fsr_ready() which now also checks the normal status register. Previously, this was done in spi_nor_ready(). Signed-off-by: Michael Walle Signed-off-by: Tudor Ambarus Tested-by: Pratyush Yadav # on mt35xu512aba, s28hs512t Reviewed-by: Pratyush Yadav Link: https://lore.kernel.org/r/20220223134358.1914798-25-michael@walle.cc

mtd: spi-nor: move all xilinx specifics into xilinx.c

2022-02-25T16:12:01Z

Mechanically move all the xilinx functions to its own module. Then register the new flash specific ready() function. Signed-off-by: Michael Walle Signed-off-by: Tudor Ambarus Reviewed-by: Pratyush Yadav Link: https://lore.kernel.org/r/20220223134358.1914798-22-michael@walle.cc

Merge tag 'mtd/spi-mem-ecc-for-5.18' into mtd/next

2022-02-18T14:11:12Z

Topic branch bringing-in changes related to the support of ECC engines that can be used by SPI controllers to manage SPI NANDs as well as possibly by parallel NAND controllers. In particular, it brings support for Macronix ECC engine that can be used with Macronix SPI controller. The changes touch the NAND core, the NAND ECC core, the spi-mem layer, a SPI controller driver and add a new NAND ECC driver, as well as a number of binding updates. Binding changes: * Vendor prefixes: Clarify Macronix prefix * SPI NAND: Convert spi-nand description file to yaml * Raw NAND chip: Create a NAND chip description * Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description * Describe Macronix NAND ECC engine * Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory NAND core changes: * ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: * Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode SPI-NAND core changes: * Delay a little bit the dirmap creation * Create direct mapping descriptors for ECC operations SPI-NAND driver changes: * macronix: Use random program load SPI changes: * Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations * spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure

spi: mxic: Add support for pipelined ECC operations

2022-02-10T08:32:30Z

Some SPI-NAND chips do not have a proper on-die ECC engine providing error correction/detection. This is particularly an issue on embedded devices with limited resources because all the computations must happen in software, unless an external hardware engine is provided. These external engines are new and can be of two categories: external or pipelined. Macronix is providing both, the former being already supported. The second, however, is very SoC implementation dependent and must be instantiated by the SPI host controller directly. An entire subsystem has been contributed to support these engines which makes the insertion into another subsystem such as SPI quite straightforward without the need for a lot of specific functions. Signed-off-by: Miquel Raynal Reviewed-by: Mark Brown Link: https://lore.kernel.org/linux-mtd/20220202144536.393792-1-miquel.raynal@bootlin.com