user/sven/linux.git/include/linux/netdev_features.h, branch v4.4.194

net: Add header for usage of fls64()

2019-02-23T08:05:13Z

[ Upstream commit 8681ef1f3d295bd3600315325f3b3396d76d02f6 ] Fixes: 3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian") Suggested-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: Fix for_each_netdev_feature on Big endian

2019-02-23T08:05:13Z

[ Upstream commit 3b89ea9c5902acccdbbdec307c85edd1bf52515e ] The features attribute is of type u64 and stored in the native endianes on the system. The for_each_set_bit() macro takes a pointer to a 32 bit array and goes over the bits in this area. On little Endian systems this also works with an u64 as the most significant bit is on the highest address, but on big endian the words are swapped. When we expect bit 15 here we get bit 47 (15 + 32). This patch converts it more or less to its own for_each_set_bit() implementation which works on 64 bit integers directly. This is then completely in host endianness and should work like expected. Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack") Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/core: fix for_each_netdev_feature

2015-11-03T16:29:57Z

As pointed out by Nikolay and further explained by Geert, the initial for_each_netdev_feature macro was broken, as feature would get set outside of the block of code it was intended to run in, thus only ever working for the first feature bit in the mask. While less pretty this way, this is tested and confirmed functional with multiple feature bits set in NETIF_F_UPPER_DISABLES. [root@dell-per730-01 ~]# ethtool -K bond0 lro off ... [ 242.761394] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 243.552178] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 244.353978] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 245.147420] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 [root@dell-per730-01 ~]# ethtool -K bond0 gro off ... [ 251.925645] bond0: Disabling feature 0x0000000000004000 on lower dev p5p2. [ 252.713693] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 253.499085] bond0: Disabling feature 0x0000000000004000 on lower dev p5p1. [ 254.290922] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack") CC: "David S. Miller" CC: Eric Dumazet CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: Jiri Pirko CC: Nikolay Aleksandrov CC: Michal Kubecek CC: Alexander Duyck CC: Geert Uytterhoeven CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

net/core: generic support for disabling netdev features down stack

2015-11-03T04:41:31Z

There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" CC: Eric Dumazet CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: Jiri Pirko CC: Nikolay Aleksandrov CC: Michal Kubecek CC: Alexander Duyck CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller

switchdev: remove NETIF_F_HW_SWITCH_OFFLOAD feature flag

2015-05-12T22:43:55Z

Roopa said remove the feature flag for this series and she'll work on bringing it back if needed at a later date. Signed-off-by: Scott Feldman Acked-by: Jiri Pirko Signed-off-by: David S. Miller

netdev: introduce new NETIF_F_HW_SWITCH_OFFLOAD feature flag for switch device offloads

2015-02-02T07:16:33Z

This is a high level feature flag for all switch asic offloads switch drivers set this flag on switch ports. Logical devices like bridge, bonds, vxlans can inherit this flag from their slaves/ports. The patch also adds the flag to NETIF_F_ONE_FOR_ALL, so that it gets propagated to the upperdevices (bridges and bonds). Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller

net: Remove MPLS GSO feature.

2014-11-06T07:52:33Z

Device can export MPLS GSO support in dev->mpls_features same way it export vlan features in dev->vlan_features. So it is safe to remove NETIF_F_GSO_MPLS redundant flag. Signed-off-by: Pravin B Shelar

udp: Changes to udp_offload to support remote checksum offload

2014-11-05T21:30:03Z

Add a new GSO type, SKB_GSO_TUNNEL_REMCSUM, which indicates remote checksum offload being done (in this case inner checksum must not be offloaded to the NIC). Added logic in __skb_udp_tunnel_segment to handle remote checksum offload case. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

openvswitch: Enable tunnel GSO for OVS bridge.

2014-07-24T08:15:04Z

Following patch enables all available tunnel GSO features for OVS bridge device so that ovs can use hardware offloads available to underling device. Signed-off-by: Pravin B Shelar Acked-by: Andy Zhou

net: Fix GSO constants to match NETIF flags

2014-06-15T08:00:49Z

Joseph Gasparakis reported that VXLAN GSO offload stopped working with i40e device after recent UDP changes. The problem is that the SKB_GSO_* bits are out of sync with the corresponding NETIF flags. This patch fixes that. Also, we add BUILD_BUG_ONs in net_gso_ok for several GSO constants that were missing to avoid the problem in the future. Reported-by: Joseph Gasparakis Signed-off-by: Tom Herbert Signed-off-by: David S. Miller