user/sven/linux.git/include/linux/netdevice.h, branch v4.19.20

ipvlan, l3mdev: fix broken l3s mode wrt local routes

2019-02-06T16:30:06Z

[ Upstream commit d5256083f62e2720f75bb3c5a928a0afe47d6bc3 ] While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") and 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback"). I found that reverting them back into using the net->loopback_dev fixed ipvlan l3s connectivity and got everything working for the CNI. Now judging from 4fbae7d83c98 ("ipvlan: Introduce l3s mode") and the l3mdev paper in [0] the only sole reason why ipvlan l3s is relying on l3 master device is to get the l3mdev_ip_rcv() receive hook for setting the dst entry of the input route without adding its own ipvlan specific hacks into the receive path, however, any l3 domain semantics beyond just that are breaking l3s operation. Note that ipvlan also has the ability to dynamically switch its internal operation from l3 to l3s for all ports via ipvlan_set_port_mode() at runtime. In any case, l3 vs l3s soley distinguishes itself by 'de-confusing' netfilter through switching skb->dev to ipvlan slave device late in NF_INET_LOCAL_IN before handing the skb to L4. Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which, if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook without any additional l3mdev semantics on top. This should also have minimal impact since dev->priv_flags is already hot in cache. With this set, l3s mode is working fine and I also get things like masquerading pod traffic on the ipvlan master properly working. [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode") Signed-off-by: Daniel Borkmann Cc: Mahesh Bandewar Cc: David Ahern Cc: Florian Westphal Cc: Martynas Pumputis Acked-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ipv4: update fnhe_pmtu when first hop's MTU changes

2018-10-11T05:44:46Z

Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions"), exceptions get deprecated separately from cached routes. In particular, administrative changes don't clear PMTU anymore. As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes"), the PMTU discovered before the local MTU change can become stale: - if the local MTU is now lower than the PMTU, that PMTU is now incorrect - if the local MTU was the lowest value in the path, and is increased, we might discover a higher PMTU Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those cases. If the exception was locked, the discovered PMTU was smaller than the minimal accepted PMTU. In that case, if the new local MTU is smaller than the current PMTU, let PMTU discovery figure out if locking of the exception is still needed. To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU notifier. By the time the notifier is called, dev->mtu has been changed. This patch adds the old MTU as additional information in the notifier structure, and a new call_netdevice_notifiers_u32() function. Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Reviewed-by: David Ahern Signed-off-by: David S. Miller

net: core: add member wol_enabled to struct net_device

2018-09-27T03:04:11Z

Add flag wol_enabled to struct net_device indicating whether Wake-on-LAN is enabled. As first user phy_suspend() will use it to decide whether PHY can be suspended or not. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Fixes: e8cfd9d6c772 ("net: phy: call state machine synchronously in phy_stop") Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: Provide stub for __netif_set_xps_queue if there is no CONFIG_XPS

2018-08-10T17:22:22Z

Building virtio_net driver without CONFIG_XPS fails with: drivers/net/virtio_net.c: In function ‘virtnet_set_affinity’: drivers/net/virtio_net.c:1910:3: error: implicit declaration of function ‘__netif_set_xps_queue’ [-Werror=implicit-function-declaration] __netif_set_xps_queue(vi->dev, mask, i, false); ^ Fixes: 4d99f6602cb5 ("net: allow to call netif_reset_xps_queues() under cpus_read_lock") Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

xsk: don't allow umem replace at stack level

2018-07-31T16:48:21Z

Currently drivers have to check if they already have a umem installed for a given queue and return an error if so. Make better use of XDP_QUERY_XSK_UMEM and move this functionality to the core. We need to keep rtnl across the calls now. Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Björn Töpel Signed-off-by: David S. Miller

net: update real_num_rx_queues even when !CONFIG_SYSFS

2018-07-31T16:48:21Z

We used to depend on real_num_rx_queues as a upper bound for sanity checks. For AF_XDP socket validation it's useful if the check behaves the same regardless of CONFIG_SYSFS setting. Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller

net: report invalid mtu value via netlink extack

2018-07-29T19:57:26Z

If an invalid MTU value is set through rtnetlink return extra error information instead of putting message in kernel log. For other cases where there is no visible API, keep the error report in the log. Example: # ip li set dev enp12s0 mtu 10000 Error: mtu greater than device maximum. # ifconfig enp12s0 mtu 10000 SIOCSIFMTU: Invalid argument # dmesg | tail -1 [ 2047.795467] enp12s0: mtu greater than device maximum Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

net: convert gro_count to bitmask

2018-07-16T20:40:54Z

gro_hash size is 192 bytes, and uses 3 cache lines, if there is few flows, gro_hash may be not fully used, so it is unnecessary to iterate all gro_hash in napi_gro_flush(), to occupy unnecessary cacheline. convert gro_count to a bitmask, and rename it as gro_bitmask, each bit represents a element of gro_hash, only flush a gro_hash element if the related bit is set, to speed up napi_gro_flush(). and update gro_bitmask only if it will be changed, to reduce cache update Suggested-by: Eric Dumazet Signed-off-by: Li RongQing Cc: Stefano Brivio Signed-off-by: David S. Miller

net: Add TLS rx resync NDO

2018-07-16T07:12:09Z

Add new netdev tls op for resynchronizing HW tls context Signed-off-by: Boris Pismenny Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2018-07-15T01:47:44Z

Daniel Borkmann says: ==================== pull-request: bpf-next 2018-07-15 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various different arm32 JIT improvements in order to optimize code emission and make the JIT code itself more robust, from Russell. 2) Support simultaneous driver and offloaded XDP in order to allow for advanced use-cases where some work is offloaded to the NIC and some to the host. Also add ability for bpftool to load programs and maps beyond just the cgroup case, from Jakub. 3) Add BPF JIT support in nfp for multiplication as well as division. For the latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong. 4) Add BTF pretty print functionality to bpftool in plain and JSON output format, from Okash. 5) Add build and installation to the BPF helper man page into bpftool, from Quentin. 6) Add a TCP BPF callback for listening sockets which is triggered right after the socket transitions to TCP_LISTEN state, from Andrey. 7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup tree and prints all attached programs, from Roman. 8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged packets, from Jesper. ==================== Signed-off-by: David S. Miller