user/sven/linux.git/include/linux/netdevice.h, branch v4.9.197

ipvlan, l3mdev: fix broken l3s mode wrt local routes

2019-02-06T16:33:27Z

[ Upstream commit d5256083f62e2720f75bb3c5a928a0afe47d6bc3 ] While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") and 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback"). I found that reverting them back into using the net->loopback_dev fixed ipvlan l3s connectivity and got everything working for the CNI. Now judging from 4fbae7d83c98 ("ipvlan: Introduce l3s mode") and the l3mdev paper in [0] the only sole reason why ipvlan l3s is relying on l3 master device is to get the l3mdev_ip_rcv() receive hook for setting the dst entry of the input route without adding its own ipvlan specific hacks into the receive path, however, any l3 domain semantics beyond just that are breaking l3s operation. Note that ipvlan also has the ability to dynamically switch its internal operation from l3 to l3s for all ports via ipvlan_set_port_mode() at runtime. In any case, l3 vs l3s soley distinguishes itself by 'de-confusing' netfilter through switching skb->dev to ipvlan slave device late in NF_INET_LOCAL_IN before handing the skb to L4. Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which, if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook without any additional l3mdev semantics on top. This should also have minimal impact since dev->priv_flags is already hot in cache. With this set, l3s mode is working fine and I also get things like masquerading pod traffic on the ipvlan master properly working. [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode") Signed-off-by: Daniel Borkmann Cc: Mahesh Bandewar Cc: David Ahern Cc: Florian Westphal Cc: Martynas Pumputis Acked-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ipv4: update fnhe_pmtu when first hop's MTU changes

2018-10-18T07:13:22Z

[ Upstream commit af7d6cce53694a88d6a1bb60c9a239a6a5144459 ] Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions"), exceptions get deprecated separately from cached routes. In particular, administrative changes don't clear PMTU anymore. As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes"), the PMTU discovered before the local MTU change can become stale: - if the local MTU is now lower than the PMTU, that PMTU is now incorrect - if the local MTU was the lowest value in the path, and is increased, we might discover a higher PMTU Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those cases. If the exception was locked, the discovered PMTU was smaller than the minimal accepted PMTU. In that case, if the new local MTU is smaller than the current PMTU, let PMTU discovery figure out if locking of the exception is still needed. To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU notifier. By the time the notifier is called, dev->mtu has been changed. This patch adds the old MTU as additional information in the notifier structure, and a new call_netdevice_notifiers_u32() function. Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tun: call dev_get_valid_name() before register_netdevice()

2017-11-18T10:22:21Z

[ Upstream commit 0ad646c81b2182f7fa67ec0c8c825e0ee165696d ] register_netdevice() could fail early when we have an invalid dev name, in which case ->ndo_uninit() is not called. For tun device, this is a problem because a timer etc. are already initialized and it expects ->ndo_uninit() to clean them up. We could move these initializations into a ->ndo_init() so that register_netdevice() knows better, however this is still complicated due to the logic in tun_detach(). Therefore, I choose to just call dev_get_valid_name() before register_netdevice(), which is quicker and much easier to audit. And for this specific case, it is already enough. Fixes: 96442e42429e ("tuntap: choose the txq based on rxq") Reported-by: Dmitry Alexeev Cc: Jason Wang Cc: "Michael S. Tsirkin" Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mlxsw: spectrum: Forbid linking to devices that have uppers

2017-09-20T06:19:55Z

[ Upstream commit 25cc72a33835ed8a6f53180a822cadab855852ac ] The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the device in case a port is enslaved to a master netdev such as bridge or bond. Since the driver ignores events unrelated to its ports and their uppers, it's possible to engineer situations in which the device's data path differs from the kernel's. One example to such a situation is when a port is enslaved to a bond that is already enslaved to a bridge. When the bond was enslaved the driver ignored the event - as the bond wasn't one of its uppers - and therefore a bridge port instance isn't created in the device. Until such configurations are supported forbid them by checking that the upper device doesn't have uppers of its own. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Ido Schimmel Reported-by: Nogah Frankel Tested-by: Nogah Frankel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: fix ndo_features_check/ndo_fix_features comment ordering

2017-06-17T04:41:52Z

[ Upstream commit 1a2a14444d32b89b28116daea86f63ced1716668 ] Commit cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()") inadvertently moved the doc comment for .ndo_fix_features instead of .ndo_features_check. Fix the comment ordering. Fixes: cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()") Signed-off-by: Dimitris Michailidis Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: introduce device min_header_len

2017-02-18T14:11:43Z

[ Upstream commit 217e6fa24ce28ec87fca8da93c9016cb78028612 ] The stack must not pass packets to device drivers that are shorter than the minimum link layer header length. Previously, packet sockets would drop packets smaller than or equal to dev->hard_header_len, but this has false positives. Zero length payload is used over Ethernet. Other link layer protocols support variable length headers. Support for validation of these protocols removed the min length check for all protocols. Introduce an explicit dev->min_header_len parameter and drop all packets below this value. Initially, set it to non-zero only for Ethernet and loopback. Other protocols can follow in a patch to net-next. Fixes: 9ed988cd5915 ("packet: validate variable length ll headers") Reported-by: Sowmini Varadhan Signed-off-by: Willem de Bruijn Acked-by: Eric Dumazet Acked-by: Sowmini Varadhan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

gro: Disable frag0 optimization on IPv6 ext headers

2017-01-15T12:42:55Z

[ Upstream commit 57ea52a865144aedbcd619ee0081155e658b6f7d ] The GRO fast path caches the frag0 address. This address becomes invalid if frag0 is modified by pskb_may_pull or its variants. So whenever that happens we must disable the frag0 optimization. This is usually done through the combination of gro_header_hard and gro_header_slow, however, the IPv6 extension header path did the pulling directly and would continue to use the GRO fast path incorrectly. This patch fixes it by disabling the fast path when we enter the IPv6 extension header path. Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address") Reported-by: Slava Shwartsman Signed-off-by: Herbert Xu Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

netdevice.h: fix kernel-doc warning

2016-11-24T01:18:36Z

Fix kernel-doc warning in (missing ':'): ..//include/linux/netdevice.h:1904: warning: No description found for parameter 'prio_tc_map[TC_BITMASK + 1]' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller

bpf: Fix bpf_redirect to an ipip/ip6tnl dev

2016-11-13T04:38:07Z

If the bpf program calls bpf_redirect(dev, 0) and dev is an ipip/ip6tnl, it currently includes the mac header. e.g. If dev is ipip, the end result is IP-EthHdr-IP instead of IP-IP. The fix is to pull the mac header. At ingress, skb_postpull_rcsum() is not needed because the ethhdr should have been pulled once already and then got pushed back just before calling the bpf_prog. At egress, this patch calls skb_postpull_rcsum(). If bpf_redirect(dev, BPF_F_INGRESS) is called, it also fails now because it calls dev_forward_skb() which eventually calls eth_type_trans(skb, dev). The eth_type_trans() will set skb->type = PACKET_OTHERHOST because the mac address does not match the redirecting dev->dev_addr. The PACKET_OTHERHOST will eventually cause the ip_rcv() errors out. To fix this, ____dev_forward_skb() is added. Joint work with Daniel Borkmann. Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel") Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Martin KaFai Lau Signed-off-by: David S. Miller

net: add recursion limit to GRO

2016-10-20T18:32:22Z

Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca Reviewed-by: Jiri Benc Acked-by: Hannes Frederic Sowa Acked-by: Tom Herbert Signed-off-by: David S. Miller