user/sven/linux.git/include/linux/netdevice.h, branch v4.9.273

net: watchdog: hold device global xmit lock during tx disable

2021-02-23T12:59:16Z

commit 3aa6bce9af0e25b735c9c1263739a5639a336ae8 upstream. Prevent netif_tx_disable() running concurrently with dev_watchdog() by taking the device global xmit lock. Otherwise, the recommended: netif_carrier_off(dev); netif_tx_disable(dev); driver shutdown sequence can happen after the watchdog has already checked carrier, resulting in possible false alarms. This is because netif_tx_lock() only sets the frozen bit without maintaining the locks on the individual queues. Fixes: c3f26a269c24 ("netdev: Fix lockdep warnings in multiqueue configurations.") Signed-off-by: Edwin Peer Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: core: reduce recursion limit value

2020-06-30T19:38:39Z

[ Upstream commit fb7861d14c8d7edac65b2fcb6e8031cb138457b2 ] In the current code, ->ndo_start_xmit() can be executed recursively only 10 times because of stack memory. But, in the case of the vxlan, 10 recursion limit value results in a stack overflow. In the current code, the nested interface is limited by 8 depth. There is no critical reason that the recursion limitation value should be 10. So, it would be good to be the same value with the limitation value of nesting interface depth. Test commands: ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789 ip link set vxlan10 up ip a a 192.168.10.1/24 dev vxlan10 ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent for i in {9..0} do let A=$i+1 ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789 ip link set vxlan$i up ip a a 192.168.$i.1/24 dev vxlan$i ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self done hping3 192.168.10.2 -2 -d 60000 Splat looks like: [ 103.814237][ T1127] ============================================================================= [ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000 [ 103.873187][ T1127] ----------------------------------------------------------------------------- [ 103.873187][ T1127] [ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020 [ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575 [ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 103.883006][ T1127] Call Trace: [ 103.883324][ T1127] dump_stack+0x96/0xdb [ 103.883716][ T1127] slab_err+0xad/0xd0 [ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30 [ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360 [ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160 [ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.886316][ T1127] check_slab+0x97/0xb0 [ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0 [ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630 [ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.888265][ T1127] ? lock_downgrade+0x730/0x730 [ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80 [ 103.889675][ T1127] __slab_alloc+0x3e/0x80 [ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420 [ ... ] Fixes: 11a766ce915f ("net: Increase xmit RECURSION_LIMIT to 10.") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

inet: protect against too small mtu values.

2019-12-21T09:42:25Z

[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ] syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dev: Use unsigned integer as an argument to left-shift

2019-12-05T14:35:14Z

[ Upstream commit f4d7b3e23d259c44f1f1c39645450680fcd935d6 ] 1 << 31 is Undefined Behaviour according to the C standard. Use U type modifier to avoid theoretical overflow. Signed-off-by: Andy Shevchenko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ipvlan, l3mdev: fix broken l3s mode wrt local routes

2019-02-06T16:33:27Z

[ Upstream commit d5256083f62e2720f75bb3c5a928a0afe47d6bc3 ] While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") and 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback"). I found that reverting them back into using the net->loopback_dev fixed ipvlan l3s connectivity and got everything working for the CNI. Now judging from 4fbae7d83c98 ("ipvlan: Introduce l3s mode") and the l3mdev paper in [0] the only sole reason why ipvlan l3s is relying on l3 master device is to get the l3mdev_ip_rcv() receive hook for setting the dst entry of the input route without adding its own ipvlan specific hacks into the receive path, however, any l3 domain semantics beyond just that are breaking l3s operation. Note that ipvlan also has the ability to dynamically switch its internal operation from l3 to l3s for all ports via ipvlan_set_port_mode() at runtime. In any case, l3 vs l3s soley distinguishes itself by 'de-confusing' netfilter through switching skb->dev to ipvlan slave device late in NF_INET_LOCAL_IN before handing the skb to L4. Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which, if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook without any additional l3mdev semantics on top. This should also have minimal impact since dev->priv_flags is already hot in cache. With this set, l3s mode is working fine and I also get things like masquerading pod traffic on the ipvlan master properly working. [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode") Signed-off-by: Daniel Borkmann Cc: Mahesh Bandewar Cc: David Ahern Cc: Florian Westphal Cc: Martynas Pumputis Acked-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ipv4: update fnhe_pmtu when first hop's MTU changes

2018-10-18T07:13:22Z

[ Upstream commit af7d6cce53694a88d6a1bb60c9a239a6a5144459 ] Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions"), exceptions get deprecated separately from cached routes. In particular, administrative changes don't clear PMTU anymore. As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes"), the PMTU discovered before the local MTU change can become stale: - if the local MTU is now lower than the PMTU, that PMTU is now incorrect - if the local MTU was the lowest value in the path, and is increased, we might discover a higher PMTU Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those cases. If the exception was locked, the discovered PMTU was smaller than the minimal accepted PMTU. In that case, if the new local MTU is smaller than the current PMTU, let PMTU discovery figure out if locking of the exception is still needed. To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU notifier. By the time the notifier is called, dev->mtu has been changed. This patch adds the old MTU as additional information in the notifier structure, and a new call_netdevice_notifiers_u32() function. Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tun: call dev_get_valid_name() before register_netdevice()

2017-11-18T10:22:21Z

[ Upstream commit 0ad646c81b2182f7fa67ec0c8c825e0ee165696d ] register_netdevice() could fail early when we have an invalid dev name, in which case ->ndo_uninit() is not called. For tun device, this is a problem because a timer etc. are already initialized and it expects ->ndo_uninit() to clean them up. We could move these initializations into a ->ndo_init() so that register_netdevice() knows better, however this is still complicated due to the logic in tun_detach(). Therefore, I choose to just call dev_get_valid_name() before register_netdevice(), which is quicker and much easier to audit. And for this specific case, it is already enough. Fixes: 96442e42429e ("tuntap: choose the txq based on rxq") Reported-by: Dmitry Alexeev Cc: Jason Wang Cc: "Michael S. Tsirkin" Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mlxsw: spectrum: Forbid linking to devices that have uppers

2017-09-20T06:19:55Z

[ Upstream commit 25cc72a33835ed8a6f53180a822cadab855852ac ] The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the device in case a port is enslaved to a master netdev such as bridge or bond. Since the driver ignores events unrelated to its ports and their uppers, it's possible to engineer situations in which the device's data path differs from the kernel's. One example to such a situation is when a port is enslaved to a bond that is already enslaved to a bridge. When the bond was enslaved the driver ignored the event - as the bond wasn't one of its uppers - and therefore a bridge port instance isn't created in the device. Until such configurations are supported forbid them by checking that the upper device doesn't have uppers of its own. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Ido Schimmel Reported-by: Nogah Frankel Tested-by: Nogah Frankel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: fix ndo_features_check/ndo_fix_features comment ordering

2017-06-17T04:41:52Z

[ Upstream commit 1a2a14444d32b89b28116daea86f63ced1716668 ] Commit cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()") inadvertently moved the doc comment for .ndo_fix_features instead of .ndo_features_check. Fix the comment ordering. Fixes: cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()") Signed-off-by: Dimitris Michailidis Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: introduce device min_header_len

2017-02-18T14:11:43Z

[ Upstream commit 217e6fa24ce28ec87fca8da93c9016cb78028612 ] The stack must not pass packets to device drivers that are shorter than the minimum link layer header length. Previously, packet sockets would drop packets smaller than or equal to dev->hard_header_len, but this has false positives. Zero length payload is used over Ethernet. Other link layer protocols support variable length headers. Support for validation of these protocols removed the min length check for all protocols. Introduce an explicit dev->min_header_len parameter and drop all packets below this value. Initially, set it to non-zero only for Ethernet and loopback. Other protocols can follow in a patch to net-next. Fixes: 9ed988cd5915 ("packet: validate variable length ll headers") Reported-by: Sowmini Varadhan Signed-off-by: Willem de Bruijn Acked-by: Eric Dumazet Acked-by: Sowmini Varadhan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman