user/sven/linux.git/include/linux/netdevice.h, branch v6.8.6

net: move dev->state into net_device_read_txrx group

2024-03-26T22:17:35Z

[ Upstream commit f6e0a4984c2e7244689ea87b62b433bed9d07e94 ] dev->state can be read in rx and tx fast paths. netif_running() which needs dev->state is called from - enqueue_to_backlog() [RX path] - __dev_direct_xmit() [TX path] Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables") Signed-off-by: Eric Dumazet Cc: Coco Li Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20240314200845.3050179-1-edumazet@google.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

dpll: move all dpll<>netdev helpers to dpll code

2024-03-06T02:36:42Z

Older versions of GCC really want to know the full definition of the type involved in rcu_assign_pointer(). struct dpll_pin is defined in a local header, net/core can't reach it. Move all the netdev <> dpll code into dpll, where the type is known. Otherwise we'd need multiple function calls to jump between the compilation units. This is the same problem the commit under fixes was trying to address, but with rcu_assign_pointer() not rcu_dereference(). Some of the exports are not needed, networking core can't be a module, we only need exports for the helpers used by drivers. Reported-by: Geert Uytterhoeven Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/ Fixes: 640f41ed33b5 ("dpll: fix build failure due to rcu_dereference_check() on unknown type") Reviewed-by: Jiri Pirko Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: bql: fix building with BQL disabled

2024-03-01T08:46:15Z

It is now possible to disable BQL, but that causes the cpsw driver to break: drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue' 297 | dql_avail(&netif_txq->dql), There is already a helper function in net/sch_generic.h that could be used to help here. Move its implementation into the common linux/netdevice.h along with the other bql interfaces and change both users over to the new interface. Fixes: ea7f3cfaa588 ("net: bql: allow the config to be disabled") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller

dpll: rely on rcu for netdev_dpll_pin()

2024-02-27T02:39:34Z

This fixes a possible UAF in if_nlmsg_size(), which can run without RTNL. Add rcu protection to "struct dpll_pin" Move netdev_dpll_pin() from netdevice.h to dpll.h to decrease name pollution. Note: This looks possible to no longer acquire RTNL in netdev_dpll_pin_assign() later in net-next. v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko) Fixes: 5f1842692880 ("netdev: expose DPLL pin handle for netdevice") Signed-off-by: Eric Dumazet Cc: Arkadiusz Kubalewski Cc: Vadim Fedorenko Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20240223123208.3543319-1-edumazet@google.com Signed-off-by: Jakub Kicinski

net-device: move lstats in net_device_read_txrx

2024-02-12T09:51:26Z

dev->lstats is notably used from loopback ndo_start_xmit() and other virtual drivers. Per cpu stats updates are dirtying per-cpu data, but the pointer itself is read-only. Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables") Signed-off-by: Eric Dumazet Cc: Coco Li Cc: Simon Horman Reviewed-by: Simon Horman Signed-off-by: David S. Miller

Revert "Introduce PHY listing and link_topology tracking"

2024-01-05T00:05:47Z

This reverts commit 32bb4515e34469975abc936deb0a116c4a445817. This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a. This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1. This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8. This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf. This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6. This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b. This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5. This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113. This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e. This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a. This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34. This reverts commit 02018c544ef113e980a2349eba89003d6f399d22. Looks like we need more time for reviews, and incremental changes will be hard to make sense of. So revert. Link: https://lore.kernel.org/all/ZZP6FV5sXEf+xd58@shell.armlinux.org.uk/ Signed-off-by: Jakub Kicinski

net-device: move xdp_prog to net_device_read_rx

2024-01-04T02:09:14Z

xdp_prog is used in receive path, both from XDP enabled drivers and from netif_elide_gro(). This patch also removes two 4-bytes holes. Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables") Signed-off-by: Eric Dumazet Cc: Coco Li Cc: Simon Horman Link: https://lore.kernel.org/r/20240102162220.750823-1-edumazet@google.com Signed-off-by: Jakub Kicinski

net-device: move gso_partial_features to net_device_read_tx

2024-01-02T12:35:42Z

dev->gso_partial_features is read from tx fast path for GSO packets. Move it to appropriate section to avoid a cache line miss. Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables") Signed-off-by: Eric Dumazet Cc: Coco Li Cc: David Ahern Reviewed-by: Simon Horman Signed-off-by: David S. Miller

net: phy: Introduce ethernet link topology representation

2024-01-01T18:38:56Z

Link topologies containing multiple network PHYs attached to the same net_device can be found when using a PHY as a media converter for use with an SFP connector, on which an SFP transceiver containing a PHY can be used. With the current model, the transceiver's PHY can't be used for operations such as cable testing, timestamping, macsec offload, etc. The reason being that most of the logic for these configuration, coming from either ethtool netlink or ioctls tend to use netdev->phydev, which in multi-phy systems will reference the PHY closest to the MAC. Introduce a numbering scheme allowing to enumerate PHY devices that belong to any netdev, which can in turn allow userspace to take more precise decisions with regard to each PHY's configuration. The numbering is maintained per-netdev, in a phy_device_list. The numbering works similarly to a netdevice's ifindex, with identifiers that are only recycled once INT_MAX has been reached. This prevents races that could occur between PHY listing and SFP transceiver removal/insertion. The identifiers are assigned at phy_attach time, as the numbering depends on the netdevice the phy is attached to. Signed-off-by: Maxime Chevallier Signed-off-by: David S. Miller

net: Add MDB bulk deletion device operation

2023-12-20T11:27:20Z

Add MDB net device operation that will be invoked by rtnetlink code in response to received 'RTM_DELMDB' messages with the 'NLM_F_BULK' flag set. Subsequent patches will implement the operation in the bridge and VXLAN drivers. Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller