user/sven/linux.git/include/linux/nfs_fs.h, branch v4.19.292

NFS: swap IO handling is slightly different for O_DIRECT IO

2022-04-15T12:15:03Z

[ Upstream commit 64158668ac8b31626a8ce48db4cad08496eb8340 ] 1/ Taking the i_rwsem for swap IO triggers lockdep warnings regarding possible deadlocks with "fs_reclaim". These deadlocks could, I believe, eventuate if a buffered read on the swapfile was attempted. We don't need coherence with the page cache for a swap file, and buffered writes are forbidden anyway. There is no other need for i_rwsem during direct IO. So never take it for swap_rw() 2/ generic_write_checks() explicitly forbids writes to swap, and performs checks that are not needed for swap. So bypass it for swap_rw(). Signed-off-by: NeilBrown Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin

NFS: nfs_find_open_context() may only select open files

2021-07-20T14:16:11Z

[ Upstream commit e97bc66377bca097e1f3349ca18ca17f202ff659 ] If a file has already been closed, then it should not be selected to support further I/O. Signed-off-by: Trond Myklebust [Trond: Fix an invalid pointer deref reported by Colin Ian King] Signed-off-by: Sasha Levin

NFS recover from destination server reboot for copies

2018-08-13T21:04:23Z

Mark the destination state to indicate a server-side copy is happening. On detecting a reboot and recovering open state check if any state is engaged in a server-side copy, if so, find the copy and mark it and then signal the waiting thread. Upon wakeup, if copy was marked then propage EAGAIN to the nfsd_copy_file_range and restart the copy from scratch. Signed-off-by: Olga Kornievskaia Signed-off-by: Anna Schumaker

NFS add support for asynchronous COPY

2018-08-09T16:56:39Z

Change xdr to always send COPY asynchronously. Keep the list copies send in a list under a server structure. Once copy is sent, it waits on a completion structure that will be signalled by the callback thread that receives CB_OFFLOAD. If CB_OFFLOAD returned an error and even if it returned partial bytes, ignore them (as we can't commit without a verifier to match) and return an error. Signed-off-by: Olga Kornievskaia Signed-off-by: Anna Schumaker

NFS: More fine grained attribute tracking

2018-04-10T20:06:22Z

Currently, if the NFS_INO_INVALID_ATTR flag is set, for instance by a call to nfs_post_op_update_inode_locked(), then it will not be cleared until all the attributes have been revalidated. This means, for instance, that NFSv4 writes will always force a full attribute revalidation. Track the ctime, mtime, size and change attribute separately from the other attributes so that we can have nfs_post_op_update_inode_locked() set them correctly, and later have the cache consistency bitmask be able to clear them. Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker

NFS: Convert NFS_INO_INVALID flags to unsigned long

2018-04-10T20:06:22Z

The cache validity attribute is unsigned long, so make sure that the flags are too. Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker

Merge tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs

2017-11-17T22:18:00Z

Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - Revalidate "." and ".." correctly on open - Avoid RCU usage in tracepoints - Fix ugly referral attributes - Fix a typo in nomigration mount option - Revert "NFS: Move the flock open mode check into nfs_flock()" Features: - Implement a stronger send queue accounting system for NFS over RDMA - Switch some atomics to the new refcount_t type Other bugfixes and cleanups: - Clean up access mode bits - Remove special-case revalidations in nfs_opendir() - Improve invalidating NFS over RDMA memory for async operations that time out - Handle NFS over RDMA replies with a worqueue - Handle NFS over RDMA sends with a workqueue - Fix up replaying interrupted requests - Remove dead NFS over RDMA definitions - Update NFS over RDMA copyright information - Be more consistent with bool initialization and comparisons - Mark expected switch fall throughs - Various sunrpc tracepoint cleanups - Fix various OPEN races - Fix a typo in nfs_rename() - Use common error handling code in nfs_lock_and_join_request() - Check that some structures are properly cleaned up during net_exit() - Remove net pointer from dprintk()s" * tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (62 commits) NFS: Revert "NFS: Move the flock open mode check into nfs_flock()" NFS: Fix typo in nomigration mount option nfs: Fix ugly referral attributes NFS: super: mark expected switch fall-throughs sunrpc: remove net pointer from messages nfs: remove net pointer from messages sunrpc: exit_net cleanup check added nfs client: exit_net cleanup check added nfs/write: Use common error handling code in nfs_lock_and_join_requests() NFSv4: Replace closed stateids with the "invalid special stateid" NFSv4: nfs_set_open_stateid must not trigger state recovery for closed state NFSv4: Check the open stateid when searching for expired state NFSv4: Clean up nfs4_delegreturn_done NFSv4: cleanup nfs4_close_done NFSv4: Retry NFS4ERR_OLD_STATEID errors in layoutreturn pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-close NFSv4: Don't try to CLOSE if the stateid 'other' field has changed NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID. NFS: Fix a typo in nfs_rename() NFSv4: Fix open create exclusive when the server reboots ...

fs, nfs: convert nfs_lock_context.count from atomic_t to refcount_t

2017-11-17T18:48:01Z

atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs_lock_context.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook Reviewed-by: David Windsor Reviewed-by: Hans Liljestrand Signed-off-by: Elena Reshetova Signed-off-by: Anna Schumaker

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

NFS: Create NFS_ACCESS_* flags

2017-10-16T17:51:27Z

Passing the NFS v4 flags into the v3 code seems weird to me, even if they are defined to the same values. This patch adds in generic flags to help me feel better Signed-off-by: Anna Schumaker