user/sven/linux.git/include/linux/of_address.h, branch v4.14.36

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

PCI, of: Move PCI I/O space management to PCI core code

2016-05-12T12:07:42Z

No functional changes in this patch. PCI I/O space mapping code does not depend on OF; therefore it can be moved to PCI core code. This way we will be able to use it, e.g., in ACPI PCI code. Suggested-by: Lorenzo Pieralisi Signed-off-by: Tomasz Nowicki Signed-off-by: Bjorn Helgaas CC: Arnd Bergmann CC: Liviu Dudau

of: fix declaration of of_io_request_and_map

2015-12-17T16:43:06Z

We are having build failure with linux-next for sparc allmodconfig with the error messages: drivers/built-in.o: In function `meson6_timer_init': meson6_timer.c:(.init.text+0x5fe8): undefined reference to `of_io_request_and_map' drivers/built-in.o: In function `mtk_timer_init': mtk_timer.c:(.init.text+0x6af0): undefined reference to `of_io_request_and_map' drivers/built-in.o: In function `asm9260_timer_init': asm9260_timer.c:(.init.text+0x6c48): undefined reference to `of_io_request_and_map' CONFIG_OF is defined for sparc so it is expected that we have a definition of of_io_request_and_map() but of/address.c is only compiled if it is !SPARC. In other words, CONFIG_OF_ADDRESS is not defined for sparc so we get the build failure. Fixes: e572f844ca66 ("clocksource/drivers/meson6: Add the COMPILE_TEST option") Fixes: bec8c4617611 ("clocksource/drivers/mediatek: Add the COMPILE_TEST option") Fixes: 4a373b45f94a ("clocksource/drivers/asm9260: Add the COMPILE_TEST option") Acked-by: Daniel Lezcano Signed-off-by: Sudip Mukherjee [robh: move include of io.h out of ifdef's] Signed-off-by: Rob Herring

of: Provide static inline function for of_translate_address if needed

2015-11-10T23:27:12Z

If OF_ADDRESS is not configured, builds can fail with errors such as drivers/net/ethernet/hisilicon/hns_mdio.c: In function 'hns_mdio_bus_name': drivers/net/ethernet/hisilicon/hns_mdio.c:411:3: error: implicit declaration of function 'of_translate_address' as currently seen when building sparc:allmodconfig. Introduce a static inline function if OF_ADDRESS is not configured to fix the build failure. Return OF_BAD_ADDR in this case. For this to work, the definition of OF_BAD_ADDR has to be moved outside CONFIG_OF conditional code. Fixes: 876133d3161d ("net: hisilicon: add OF dependency") Cc: Arnd Bergmann Signed-off-by: Guenter Roeck Reviewed-by: Arnd Bergmann Reviewed-by: Frank Rowand Signed-off-by: Rob Herring

of: Request and map make argument name constant

2014-11-04T16:43:08Z

This patch makes the name argument from of_io_request_and_map constant. Signed-off-by: Matthias Brugger Signed-off-by: Grant Likely

of/pci: Fix the conversion of IO ranges into IO resources

2014-09-30T23:08:40Z

The ranges property for a host bridge controller in DT describes the mapping between the PCI bus address and the CPU physical address. The resources framework however expects that the IO resources start at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The conversion from PCI ranges to resources failed to take that into account, returning a CPU physical address instead of a port number. Also fix all the drivers that depend on the old behaviour by fetching the CPU physical address based on the port number where it is being needed. Signed-off-by: Liviu Dudau Signed-off-by: Bjorn Helgaas Acked-by: Linus Walleij CC: Grant Likely CC: Rob Herring CC: Arnd Bergmann CC: Thierry Reding CC: Simon Horman CC: Catalin Marinas

of/pci: Move of_pci_range_to_resource() to of/address.c

2014-09-30T19:29:09Z

We need to enhance of_pci_range_to_resources() enough that it won't make sense for it to be inline anymore. Move it to drivers/of/address.c, under #ifdef CONFIG_PCI. of_address.h previously implemented of_pci_range_to_resources() unconditionally, regardless of any config options. The implementation in address.c is defined only when CONFIG_OF_ADDRESS=y and CONFIG_PCI=y, so add a dummy version to avoid build errors when CONFIG_OF or CONFIG_OF_ADDRESS is not defined. [bhelgaas: drop extra detail from changelog, move def under CONFIG_PCI, add dummy of_pci_range_to_resource() for build errors (from Arnd)] Signed-off-by: Liviu Dudau Signed-off-by: Bjorn Helgaas CC: Grant Likely CC: Rob Herring CC: Arnd Bergmann CC: Catalin Marinas

of/pci: Add pci_register_io_range() and pci_pio_to_address()

2014-09-30T15:42:45Z

Some architectures do not have a simple view of the PCI I/O space and instead use a range of CPU addresses that map to bus addresses. For some architectures these ranges will be expressed by OF bindings in a device tree file. This patch introduces a pci_register_io_range() helper function with a generic implementation that can be used by such architectures to keep track of the I/O ranges described by the PCI bindings. If the PCI_IOBASE macro is not defined, that signals lack of support for PCI and we return an error. In order to retrieve the CPU address associated with an I/O port, a new helper function pci_pio_to_address() is introduced. This will search in the list of ranges registered with pci_register_io_range() and return the CPU address that corresponds to the given port. [arnd: add dummy !CONFIG_OF pci_pio_to_address() to fix build errors] Signed-off-by: Liviu Dudau Signed-off-by: Bjorn Helgaas Reviewed-by: Catalin Marinas Acked-by: Rob Herring CC: Grant Likely

of: Provide a function to request and map memory

2014-07-23T10:02:30Z

A call to of_iomap does not request the memory region. This patch adds the function of_io_request_and_map which requests the memory region before mapping it. Signed-off-by: Matthias Brugger Suggested-by: Thomas Gleixner Suggested-by: Rob Herring Acked-by: Rob Herring Signed-off-by: Daniel Lezcano

Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next

2014-06-05T22:57:04Z

Pull ARM updates from Russell King: - Major clean-up of the L2 cache support code. The existing mess was becoming rather unmaintainable through all the additions that others have done over time. This turns it into a much nicer structure, and implements a few performance improvements as well. - Clean up some of the CP15 control register tweaks for alignment support, moving some code and data into alignment.c - DMA properties for ARM, from Santosh and reviewed by DT people. This adds DT properties to specify bus translations we can't discover automatically, and to indicate whether devices are coherent. - Hibernation support for ARM - Make ftrace work with read-only text in modules - add suspend support for PJ4B CPUs - rework interrupt masking for undefined instruction handling, which allows us to enable interrupts earlier in the handling of these exceptions. - support for big endian page tables - fix stacktrace support to exclude stacktrace functions from the trace, and add save_stack_trace_regs() implementation so that kprobes can record stack traces. - Add support for the Cortex-A17 CPU. - Remove last vestiges of ARM710 support. - Removal of ARM "meminfo" structure, finally converting us solely to memblock to handle the early memory initialisation. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits) ARM: ensure C page table setup code follows assembly code (part II) ARM: ensure C page table setup code follows assembly code ARM: consolidate last remaining open-coded alignment trap enable ARM: remove global cr_no_alignment ARM: remove CPU_CP15 conditional from alignment.c ARM: remove unused adjust_cr() function ARM: move "noalign" command line option to alignment.c ARM: provide common method to clear bits in CPU control register ARM: 8025/1: Get rid of meminfo ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type ARM: 8066/1: correction for ARM patch 8031/2 ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation ARM: 8065/1: remove last use of CONFIG_CPU_ARM710 ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction ARM: 8047/1: rwsem: use asm-generic rwsem implementation ARM: l2c: trial at enabling some Cortex-A9 optimisations ARM: l2c: add warnings for stuff modifying aux_ctrl register values ARM: l2c: print a warning with L2C-310 caches if the cache size is modified ARM: l2c: remove old .set_debug method ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this ...