user/sven/linux.git/include/linux/of_device.h, branch v4.12

Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2017-05-09T22:15:47Z

Pull IOMMU updates from Joerg Roedel: - code optimizations for the Intel VT-d driver - ability to switch off a previously enabled Intel IOMMU - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs - header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that - ACPI/IORT updates and fixes - Exynos IOMMU optimizations - updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches - new command-line option to set default domain type allocated by the iommu core code - another command line option to allow the Intel IOMMU switched off in a tboot environment - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) - various other small fixes and improvements * tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits) soc/qbman: Move dma-mapping.h include to qman_priv.h soc/qbman: Fix implicit header dependency now causing build fails iommu: Remove trace-events include from iommu.h iommu: Remove pci.h include from trace/events/iommu.h arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() ACPI/IORT: Fix CONFIG_IOMMU_API dependency iommu/vt-d: Don't print the failure message when booting non-kdump kernel iommu: Move report_iommu_fault() to iommu.c iommu: Include device.h in iommu.h x86, iommu/vt-d: Add an option to disable Intel IOMMU force on iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed iommu/arm-smmu: Correct sid to mask iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code omap3isp: Remove iommu_group related code iommu/omap: Add iommu-group support iommu/omap: Make use of 'struct iommu_device' iommu/omap: Store iommu_dev pointer in arch_data iommu/omap: Move data structures to omap-iommu.h iommu/omap: Drop legacy-style device support ...

iommu: of: Handle IOMMU lookup failure with deferred probing or error

2017-04-20T14:31:07Z

Failures to look up an IOMMU when parsing the DT iommus property need to be handled separately from the .of_xlate() failures to support deferred probing. The lack of a registered IOMMU can be caused by the lack of a driver for the IOMMU, the IOMMU device probe not having been performed yet, having been deferred, or having failed. The first case occurs when the device tree describes the bus master and IOMMU topology correctly but no device driver exists for the IOMMU yet or the device driver has not been compiled in. Return NULL, the caller will configure the device without an IOMMU. The second and third cases are handled by deferring the probe of the bus master device which will eventually get reprobed after the IOMMU. The last case is currently handled by deferring the probe of the bus master device as well. A mechanism to either configure the bus master device without an IOMMU or to fail the bus master device probe depending on whether the IOMMU is optional or mandatory would be a good enhancement. Tested-by: Marek Szyprowski Reviewed-by: Robin Murphy Acked-by: Rob Herring Signed-off-by: Laurent Pichart Signed-off-by: Sricharan R Signed-off-by: Joerg Roedel

of: dma: Make of_dma_deconfigure() public

2017-04-20T14:31:06Z

As part of moving DMA initializing to probe time the of_dma_deconfigure() function will need to be called from different source files. Make it public and move it to drivers/of/device.c where the of_dma_configure() function is. Tested-by: Marek Szyprowski Reviewed-by: Robin Murphy Acked-by: Rob Herring Signed-off-by: Laurent Pinchart Signed-off-by: Joerg Roedel

of: Add function for generating a DT modalias with a newline

2017-03-22T19:56:13Z

The modalias sysfs attr is lacking a newline for DT aliases on platform devices. The macio and ibmebus correctly add the newline, but open code it. Introduce a new function, of_device_modalias(), that fills the buffer with the modalias including the newline and update users of the old of_device_get_modalias function. Signed-off-by: Rob Herring Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Frank Rowand Cc: linuxppc-dev@lists.ozlabs.org Acked-by: Greg Kroah-Hartman

Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2017-02-23T03:23:14Z

Pull DeviceTree updates from Rob Herring: "Pretty standard stuff with dtc upstream sync being the biggest piece. - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay support in dtc. - Set dma_ops for reserved memory users. - Make references to IOMMU consistent in DT bindings. - Cleanup references to pm_power_off in bindings. - Move some display bindings that snuck into the old bindings/video/ path. - Fix some wrong documentation paths caused from binding restructuring. - Vendor prefixes for Faraday and Fujitsu. - Fix an of_node ref counting leak in of_find_node_opts_by_path - Introduce new graph helper of_graph_get_remote_node() which will be used by DRM drivers in 4.12" * tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits) DT: add Faraday Tec. as vendor of: introduce of_graph_get_remote_node of: Add missing space at end of pr_fmt(). of: make of_device_make_bus_id() static of: fix of_node leak caused in of_find_node_opts_by_path dt-bindings: net: remove reference to fixed link support dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off dt-bindings: mfd: as3722: Drop reference to pm_power_off dt-bindings: display: move ANX7814 and SiI8620 bridge bindings of/unittest: Swap arguments of of_unittest_apply_overlay() Documentation: usb: fix wrong documentation paths serial: fsl-imx-uart.txt: Remove generic property devicetree: Add Fujitsu Ltd. vendor prefix Documentation: display: fix wrong documentation paths of: remove redundant memset in overlay bus:qcom : Fix typo in qcom,ebi2.txt dt-bindings: qman: Remove pool channel node Documentation: panel-dpi: fix path to display-timing.txt devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP ...

of: make of_device_make_bus_id() static

2017-02-09T15:29:37Z

of_device_make_bus_id() was changed to non-static by commit c66012253800 ("of/device: Make of_device_make_bus_id() usable by other code") more than 6 years ago, but there are no users of it outside of platform.c. Make the function static again. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring

of: device: Support loading a module with OF based modalias

2017-01-20T03:23:51Z

In the case of ULPI devices, we want to be able to load the driver before registering the device so that we don't get stuck in a loop waiting for the phy module to appear and failing usb controller probe. Currently we request the ulpi module via the ulpi ids, but in the DT case we might need to request it with the OF based modalias instead. Add a common function that allows anyone to request a module with the OF based modalias. Acked-by: Rob Herring Cc: Signed-off-by: Stephen Boyd Signed-off-by: Peter Chen

of: constify drv arg of of_driver_match_device stub

2015-07-27T13:23:27Z

With this change the stub has the same signature as the actual function, preventing this compiler warning when building without CONFIG_OF: drivers/base/property.c: In function 'fwnode_driver_match_device': >> drivers/base/property.c:608:38: warning: passing argument 2 of 'of_driver_match_device' discards 'const' qualifier from pointer target type return of_driver_match_device(dev, drv); ^ In file included from drivers/base/property.c:18:0: include/linux/of_device.h:61:19: note: expected 'struct device_driver *' but argument is of type 'const struct device_driver *' static inline int of_driver_match_device(struct device *dev, ^ Signed-off-by: Tomeu Vizoso Signed-off-by: Rob Herring

of: add helper function to retrive match data

2015-05-28T17:59:40Z

It's a common operation for device drivers to retrive the data member from of_device_id struct in their probe function. Most driver end up doing: const struct of_device_id *match; match = of_match_device(driver_of_match, &pdev->dev); driver->data = match->data; With the of_device_get_match_data helper function all this can done in one go. Signed-off-by: Joachim Eastwood [robh: add missing inline to dummmy declaration] Signed-off-by: Rob Herring

of: Move of_dma_configure() to device.c to help re-use

2015-03-03T20:42:56Z

Move of_dma_configure() to device.c so it can be re-used for PCI devices to obtain DMA configuration from DT. Also add a second argument so that for PCI, the DT node of root bus host bridge can be used to obtain the DMA configuration for the slave PCI device. Tested-by: Suravee Suthikulpanit (AMD Seattle) Signed-off-by: Murali Karicheri Signed-off-by: Bjorn Helgaas Reviewed-by: Catalin Marinas Acked-by: Will Deacon Acked-by: Rob Herring CC: Joerg Roedel CC: Grant Likely CC: Russell King CC: Arnd Bergmann