user/sven/linux.git/include/linux/pci.h, branch v3.4.67

PCI: EHCI: fix crash during suspend on ASUS computers

2012-07-16T16:04:39Z

commit dbf0e4c7257f8d684ec1a3c919853464293de66e upstream. Quite a few ASUS computers experience a nasty problem, related to the EHCI controllers, when going into system suspend. It was observed that the problem didn't occur if the controllers were not put into the D3 power state before starting the suspend, and commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers) was created to do this. It turned out this approach messed up other computers that didn't have the problem -- it prevented USB wakeup from working. Consequently commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b (USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2) was merged; it reverted the earlier commit and added a whitelist of known good board names. Now we know the actual cause of the problem. Thanks to AceLan Kao for tracking it down. According to him, an engineer at ASUS explained that some of their BIOSes contain a bug that was added in an attempt to work around a problem in early versions of Windows. When the computer goes into S3 suspend, the BIOS tries to verify that the EHCI controllers were first quiesced by the OS. Nothing's wrong with this, but the BIOS does it by checking that the PCI COMMAND registers contain 0 without checking the controllers' power state. If the register isn't 0, the BIOS assumes the controller needs to be quiesced and tries to do so. This involves making various MMIO accesses to the controller, which don't work very well if the controller is already in D3. The end result is a system hang or memory corruption. Since the value in the PCI COMMAND register doesn't matter once the controller has been suspended, and since the value will be restored anyway when the controller is resumed, we can work around the BIOS bug simply by setting the register to 0 during system suspend. This patch (as1590) does so and also reverts the second commit mentioned above, which is now unnecessary. In theory we could do this for every PCI device. However to avoid introducing new problems, the patch restricts itself to EHCI host controllers. Finally the affected systems can suspend with USB wakeup working properly. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728 Based-on-patch-by: AceLan Kao Signed-off-by: Alan Stern Tested-by: Dâniel Fraga Tested-by: Javier Marcet Tested-by: Andrey Rahmatullin Tested-by: Oleksij Rempel Tested-by: Pavel Pisa Acked-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2

2012-06-22T18:37:13Z

commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b upstream. This patch (as1558) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. A similar patch has already been applied as commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers). The patch supersedes that one and reverts it. There are two differences: The old patch added the flag at the USB level; this patch adds it at the PCI level. The old patch applied to all chipsets with the same vendor, subsystem vendor, and product IDs; this patch makes an exception for a known-good system (based on DMI information). Signed-off-by: Alan Stern Tested-by: Dâniel Fraga Tested-by: Andrey Rahmatullin Tested-by: Steven Rostedt Reviewed-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci

2012-03-23T21:02:12Z

Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...

Merge tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

2012-03-23T03:16:14Z

Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook.

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2012-03-22T01:55:10Z

Pull powerpc merge from Benjamin Herrenschmidt: "Here's the powerpc batch for this merge window. It is going to be a bit more nasty than usual as in touching things outside of arch/powerpc mostly due to the big iSeriesectomy :-) We finally got rid of the bugger (legacy iSeries support) which was a PITA to maintain and that nobody really used anymore. Here are some of the highlights: - Legacy iSeries is gone. Thanks Stephen ! There's still some bits and pieces remaining if you do a grep -ir series arch/powerpc but they are harmless and will be removed in the next few weeks hopefully. - The 'fadump' functionality (Firmware Assisted Dump) replaces the previous (equivalent) "pHyp assisted dump"... it's a rewrite of a mechanism to get the hypervisor to do crash dumps on pSeries, the new implementation hopefully being much more reliable. Thanks Mahesh Salgaonkar. - The "EEH" code (pSeries PCI error handling & recovery) got a big spring cleaning, motivated by the need to be able to implement a new backend for it on top of some new different type of firwmare. The work isn't complete yet, but a good chunk of the cleanups is there. Note that this adds a field to struct device_node which is not very nice and which Grant objects to. I will have a patch soon that moves that to a powerpc private data structure (hopefully before rc1) and we'll improve things further later on (hopefully getting rid of the need for that pointer completely). Thanks Gavin Shan. - I dug into our exception & interrupt handling code to improve the way we do lazy interrupt handling (and make it work properly with "edge" triggered interrupt sources), and while at it found & fixed a wagon of issues in those areas, including adding support for page fault retry & fatal signals on page faults. - Your usual random batch of small fixes & updates, including a bunch of new embedded boards, both Freescale and APM based ones, etc..." I fixed up some conflicts with the generalized irq-domain changes from Grant Likely, hopefully correctly. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits) powerpc/ps3: Do not adjust the wrapper load address powerpc: Remove the rest of the legacy iSeries include files powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces init: Remove CONFIG_PPC_ISERIES powerpc: Remove FW_FEATURE ISERIES from arch code tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable powerpc/spufs: Fix double unlocks powerpc/5200: convert mpc5200 to use of_platform_populate() powerpc/mpc5200: add options to mpc5200_defconfig powerpc/mpc52xx: add a4m072 board support powerpc/mpc5200: update mpc5200_defconfig to fit for charon board Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board MAINTAINERS: Update PowerPC 4xx tree powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board powerpc: document the FSL MPIC message register binding powerpc: add support for MPIC message register API powerpc/fsl: Added aliased MSIIR register address to MSI node in dts powerpc/85xx: mpc8548cds - add 36-bit dts ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2012-03-21T04:12:50Z

Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...

constify struct pci_dev * in obvious cases

2012-03-19T23:20:37Z

Signed-off-by: Al Viro Signed-off-by: Jiri Kosina

powerpc/eeh: Introduce EEH device

2012-03-09T00:39:29Z

Original EEH implementation depends on struct pci_dn heavily. However, EEH shouldn't depend on that actually because EEH needn't share much information with other PCI components. That's to say, EEH should have worked independently. The patch introduces struct eeh_dev so that EEH core components needn't be working based on struct pci_dn in future. Also, struct pci_dn, struct eeh_dev instances are created in dynamic fasion and the binding with EEH device, OF node, PCI device is implemented as well. The EEH devices are created after PHBs are detected and initialized, but PCI emunation hasn't started yet. Apart from that, PHB might be created dynamically through DLPAR component and the EEH devices should be creatd as well. Another case might be OF node is created dynamically by DR (Dynamic Reconfiguration), which has been defined by PAPR. For those OF nodes created by DR, EEH devices should be also created accordingly. The binding between EEH device and OF node is done while the EEH device is initially created. The binding between EEH device and PCI device should be done after PCI emunation is done. Besides, PCI hotplug also needs the binding so that the EEH devices could be traced from the newly coming PCI buses or PCI devices. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt

PCI: export __pci_remove_bus_device

2012-02-27T20:16:55Z

Don't switch to pci_remove_bus_device yet, keep the __ prefix for now (the behavior is still the same: remove without stopping first). This allows other out of tree users or pending patches to get notified from compiler warning. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes

PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge

2012-02-27T20:14:55Z

The old pci_remove_behind_bridge actually do stop and remove. Make the name reflect that to reduce confusion. Suggested-by: Jesse Barnes Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes