user/sven/linux.git/include/linux/perf_event.h, branch v4.14.53

Merge branch 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-09-04T20:56:37Z

Pull x86 cache quality monitoring update from Thomas Gleixner: "This update provides a complete rewrite of the Cache Quality Monitoring (CQM) facility. The existing CQM support was duct taped into perf with a lot of issues and the attempts to fix those turned out to be incomplete and horrible. After lengthy discussions it was decided to integrate the CQM support into the Resource Director Technology (RDT) facility, which is the obvious choise as in hardware CQM is part of RDT. This allowed to add Memory Bandwidth Monitoring support on top. As a result the mechanisms for allocating cache/memory bandwidth and the corresponding monitoring mechanisms are integrated into a single management facility with a consistent user interface" * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) x86/intel_rdt: Turn off most RDT features on Skylake x86/intel_rdt: Add command line options for resource director technology x86/intel_rdt: Move special case code for Haswell to a quirk function x86/intel_rdt: Remove redundant ternary operator on return x86/intel_rdt/cqm: Improve limbo list processing x86/intel_rdt/mbm: Fix MBM overflow handler during CPU hotplug x86/intel_rdt: Modify the intel_pqr_state for better performance x86/intel_rdt/cqm: Clear the default RMID during hotcpu x86/intel_rdt: Show bitmask of shareable resource with other executing units x86/intel_rdt/mbm: Handle counter overflow x86/intel_rdt/mbm: Add mbm counter initialization x86/intel_rdt/mbm: Basic counting of MBM events (total and local) x86/intel_rdt/cqm: Add CPU hotplug support x86/intel_rdt/cqm: Add sched_in support x86/intel_rdt: Introduce rdt_enable_key for scheduling x86/intel_rdt/cqm: Add mount,umount support x86/intel_rdt/cqm: Add rmdir support x86/intel_rdt: Separate the ctrl bits from rmdir x86/intel_rdt/cqm: Add mon_data x86/intel_rdt: Prepare for RDT monitor data support ...

perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR

2017-08-29T13:09:25Z

For understanding how the workload maps to memory channels and hardware behavior, it's very important to collect address maps with physical addresses. For example, 3D XPoint access can only be found by filtering the physical address. Add a new sample type for physical address. perf already has a facility to collect data virtual address. This patch introduces a function to convert the virtual address to physical address. The function is quite generic and can be extended to any architecture as long as a virtual address is provided. - For kernel direct mapping addresses, virt_to_phys is used to convert the virtual addresses to physical address. - For user virtual addresses, __get_user_pages_fast is used to walk the pages tables for user physical address. - This does not work for vmalloc addresses right now. These are not resolved, but code to do that could be added. The new sample type requires collecting the virtual address. The virtual address will not be output unless SAMPLE_ADDR is applied. For security, the physical address can only be exposed to root or privileged user. Tested-by: Madhavan Srinivasan Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: acme@kernel.org Cc: mpe@ellerman.id.au Link: http://lkml.kernel.org/r/1503967969-48278-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar

perf/core, pt, bts: Get rid of itrace_started

2017-08-29T13:09:24Z

I just noticed that hw.itrace_started and hw.config are aliased to the same location. Now, the PT driver happens to use both, which works out fine by sheer luck: - STORE(hw.itrace_start) is ordered before STORE(hw.config), in the program order, although there are no compiler barriers to ensure that, - to the perf_log_itrace_start() hw.itrace_start looks set at the same time as when it is intended to be set because both stores happen in the same path, - hw.config is never reset to zero in the PT driver. Now, the use of hw.config by the PT driver makes more sense (it being a HW PMU) than messing around with itrace_started, which is an awkward API to begin with. This patch replaces hw.itrace_started with an attach_state bit and an API call for the PMU drivers to use to communicate the condition. Signed-off-by: Alexander Shishkin Signed-off-by: Peter Zijlstra (Intel) Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: vince@deater.net Link: http://lkml.kernel.org/r/20170330153956.25994-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar

perf/ftrace: Fix double traces of perf on ftrace:function

2017-08-29T11:29:29Z

When running perf on the ftrace:function tracepoint, there is a bug which can be reproduced by: perf record -e ftrace:function -a sleep 20 & perf record -e ftrace:function ls perf script ls 10304 [005] 171.853235: ftrace:function: perf_output_begin ls 10304 [005] 171.853237: ftrace:function: perf_output_begin ls 10304 [005] 171.853239: ftrace:function: task_tgid_nr_ns ls 10304 [005] 171.853240: ftrace:function: task_tgid_nr_ns ls 10304 [005] 171.853242: ftrace:function: __task_pid_nr_ns ls 10304 [005] 171.853244: ftrace:function: __task_pid_nr_ns We can see that all the function traces are doubled. The problem is caused by the inconsistency of the register function perf_ftrace_event_register() with the probe function perf_ftrace_function_call(). The former registers one probe for every perf_event. And the latter handles all perf_events on the current cpu. So when two perf_events on the current cpu, the traces of them will be doubled. So this patch adds an extra parameter "event" for perf_tp_event, only send sample data to this event when it's not NULL. Signed-off-by: Zhou Chengming Reviewed-by: Jiri Olsa Acked-by: Steven Rostedt (VMware) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: acme@kernel.org Cc: alexander.shishkin@linux.intel.com Cc: huawei.libin@huawei.com Link: http://lkml.kernel.org/r/1503668977-12526-1-git-send-email-zhouchengming1@huawei.com Signed-off-by: Ingo Molnar

perf/x86: Fix RDPMC vs. mm_struct tracking

2017-08-10T10:01:08Z

Vince reported the following rdpmc() testcase failure: > Failing test case: > > fd=perf_event_open(); > addr=mmap(fd); > exec() // without closing or unmapping the event > fd=perf_event_open(); > addr=mmap(fd); > rdpmc() // GPFs due to rdpmc being disabled The problem is of course that exec() plays tricks with what is current->mm, only destroying the old mappings after having installed the new mm. Fix this confusion by passing along vma->vm_mm instead of relying on current->mm. Reported-by: Vince Weaver Tested-by: Vince Weaver Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Andy Lutomirski Cc: Arnaldo Carvalho de Melo Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: stable@vger.kernel.org Fixes: 1e0fb9ec679c ("perf: Add pmu callbacks to track event mapping and unmapping") Link: http://lkml.kernel.org/r/20170802173930.cstykcqefmqt7jau@hirez.programming.kicks-ass.net [ Minor cleanups. ] Signed-off-by: Ingo Molnar

x86/perf/cqm: Wipe out perf based cqm

2017-08-01T20:41:18Z

'perf cqm' never worked due to the incompatibility between perf infrastructure and cqm hardware support. The hardware uses RMIDs to track the llc occupancy of tasks and these RMIDs are per package. This makes monitoring a hierarchy like cgroup along with monitoring of tasks separately difficult and several patches sent to lkml to fix them were NACKed. Further more, the following issues in the current perf cqm make it almost unusable: 1. No support to monitor the same group of tasks for which we do allocation using resctrl. 2. It gives random and inaccurate data (mostly 0s) once we run out of RMIDs due to issues in Recycling. 3. Recycling results in inaccuracy of data because we cannot guarantee that the RMID was stolen from a task when it was not pulling data into cache or even when it pulled the least data. Also for monitoring llc_occupancy, if we stop using an RMID_x and then start using an RMID_y after we reclaim an RMID from an other event, we miss accounting all the occupancy that was tagged to RMID_x at a later perf_count. 2. Recycling code makes the monitoring code complex including scheduling because the event can lose RMID any time. Since MBM counters count bandwidth for a period of time by taking snap shot of total bytes at two different times, recycling complicates the way we count MBM in a hierarchy. Also we need a spin lock while we do the processing to account for MBM counter overflow. We also currently use a spin lock in scheduling to prevent the RMID from being taken away. 4. Lack of support when we run different kind of event like task, system-wide and cgroup events together. Data mostly prints 0s. This is also because we can have only one RMID tied to a cpu as defined by the cqm hardware but a perf can at the same time tie multiple events during one sched_in. 5. No support of monitoring a group of tasks. There is partial support for cgroup but it does not work once there is a hierarchy of cgroups or if we want to monitor a task in a cgroup and the cgroup itself. 6. No support for monitoring tasks for the lifetime without perf overhead. 7. It reported the aggregate cache occupancy or memory bandwidth over all sockets. But most cloud and VMM based use cases want to know the individual per-socket usage. Signed-off-by: Vikas Shivappa Signed-off-by: Thomas Gleixner Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-2-git-send-email-vikas.shivappa@linux.intel.com

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2017-07-05T19:31:59Z

Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...

perf, bpf: Add BPF support to all perf_event types

2017-06-05T01:58:01Z

Allow BPF_PROG_TYPE_PERF_EVENT program types to attach to all perf_event types, including HW_CACHE, RAW, and dynamic pmu events. Only tracepoint/kprobe events are treated differently which require BPF_PROG_TYPE_TRACEPOINT/BPF_PROG_TYPE_KPROBE program types accordingly. Also add support for reading all event counters using bpf_perf_event_read() helper. Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller

perf/tracing/cpuhotplug: Fix locking order

2017-05-26T08:10:44Z

perf, tracing, kprobes and jump_labels have a gazillion of ways to create dependency lock chains. Some of those involve nested invocations of get_online_cpus(). The conversion of the hotplug locking to a percpu rwsem requires to avoid such nested calls. sys_perf_event_open() protects most of the syscall logic against cpu hotplug. This causes nested calls and lock inversions versus ftrace and kprobes in various interesting ways. It's impossible to move the hotplug locking to the outer end of all call chains in the involved facilities, so the hotplug protection in sys_perf_event_open() needs to be solved differently. Introduce 'pmus_mutex' which protects a perf private online cpumask. This mutex is taken when the mask is updated in the cpu hotplug callbacks and can be taken in sys_perf_event_open() to protect the swhash setup/teardown code and when the final judgement about a valid event has to be made. [ tglx: Produced changelog and fixed the swhash interaction ] Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Acked-by: Ingo Molnar Cc: Paul E. McKenney Cc: Sebastian Siewior Cc: Steven Rostedt Cc: Mathieu Desnoyers Cc: Masami Hiramatsu Link: http://lkml.kernel.org/r/20170524081548.930941109@linutronix.de

x86/events/amd/iommu: Add IOMMU-specific hw_perf_event struct

2017-03-30T07:55:35Z

Current AMD IOMMU perf PMU inappropriately uses the hardware struct inside the union in struct hw_perf_event, extra_reg in particular. Instead, introduce an AMD IOMMU-specific struct with required parameters to be programmed into the IOMMU performance counter control register. Update the pasid field from 16 to 20 bits while at it. Signed-off-by: Suravee Suthikulpanit [ Fixup macros, shorten get_next_avail_iommu_bnk_cntr() local vars, massage commit message. ] Signed-off-by: Borislav Petkov Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Jörg Rödel Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/1487926102-13073-10-git-send-email-Suravee.Suthikulpanit@amd.com Signed-off-by: Ingo Molnar