user/sven/linux.git/include/linux/phy.h, branch v4.10

net: phy: leds: Break dependency of phy.h on phy_led_triggers.h

2017-01-25T19:40:19Z

includes , which is not really needed. Drop the include from , and add it to all users that didn't include it explicitly. Suggested-by: Andrew Lunn Signed-off-by: Geert Uytterhoeven Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

phy: add phy fixup unregister functions

2016-12-08T19:21:47Z

>From : Woojung Huh Add functions to unregister phy fixup for modules. int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask) Unregister phy fixup from phy_fixup_list per bus_id, phy_uid & phy_uid_mask int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask) Unregister phy fixup from phy_fixup_list. Use it for fixup registered by phy_register_fixup_for_uid() int phy_unregister_fixup_for_id(const char *bus_id) Unregister phy fixup from phy_fixup_list. Use it for fixup registered by phy_register_fixup_for_id() Signed-off-by: Woojung Huh Signed-off-by: David S. Miller

net: phy: add mdix_ctrl to hold the user configuration.

2016-12-01T16:26:47Z

Add new parameter mdix_ctrl to hold the user configuration. Existing mdix maintain the current status of MDI(X) crossover performed or not. mdix_ctrl can configure either ETH_TP_MDI or ETH_TP_MDI_X orETH_TP_MDI_AUTO. Signed-off-by: Raju Lakkaraju Signed-off-by: David S. Miller

net: phy: add an option to disable EEE advertisement

2016-11-30T00:38:31Z

This patch adds an option to disable EEE advertisement in the generic PHY by providing a mask of prohibited modes corresponding to the value found in the MDIO_AN_EEE_ADV register. On some platforms, PHY Low power idle seems to be causing issues, even breaking the link some cases. The patch provides a convenient way for these platforms to disable EEE advertisement and work around the issue. Signed-off-by: Jerome Brunet Tested-by: Yegor Yefremov Tested-by: Andreas Färber Signed-off-by: David S. Miller

ethtool: Implements ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE

2016-11-18T17:12:14Z

Adding get_tunable/set_tunable function pointer to the phy_driver structure, and uses these function pointers to implement the ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE ioctls. Signed-off-by: Raju Lakkaraju Reviewed-by: Andrew Lunn Signed-off-by: Allan W. Nielsen Signed-off-by: David S. Miller

net: phy: Add phy_ethtool_nway_reset

2016-11-15T21:33:35Z

This function just calls into genphy_restart_aneg() to perform an autonegotation restart. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: expose phy_aneg_done API for use by drivers

2016-11-13T05:56:26Z

Make phy_aneg_done() available to drivers so that the result of the auto-negotiation initiated by phy_start_aneg() can be determined. Remove the local implementation of phy_aneg_done() from the Aeroflex driver and use the phy library version. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

net: phy: leds: add support for led triggers on phy link state change

2016-10-18T15:56:31Z

Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright Signed-off-by: Nathan Sullivan Signed-off-by: Zach Brown Signed-off-by: David S. Miller

net: phy: Create phy_supported_speeds function which lists speeds currently supported by a phydevice

2016-10-18T15:56:31Z

phy_supported_speeds provides a means to get a list of all the speeds a phy device currently supports. Signed-off-by: Zach Brown Signed-off-by: David S. Miller

net: phy: Threaded interrupts allow some simplification

2016-10-17T15:18:08Z

The PHY interrupts are now handled in a threaded interrupt handler, which can sleep. The work queue is no longer needed, phy_change() can be called directly. phy_mac_interrupt() still needs to be safe to call in interrupt context, so keep the work queue, and use a helper to call phy_change(). Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller