user/sven/linux.git/include/linux/phy.h, branch v4.16.14

net: phy: Add general dummy stubs for MMD register access

2018-03-22T15:41:07Z

For some phy devices, even though they don't support the MMD extended register access, it does have some side effect if we are trying to read/write the MMD registers via indirect method. So introduce general dummy stubs for MMD register access which these devices can use to avoid such side effect. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao Signed-off-by: David S. Miller

net: phy: Tell caller result of phy_change()

2018-03-12T14:33:07Z

In 664fcf123a30e (net: phy: Threaded interrupts allow some simplification) the phy_interrupt system was changed to use a traditional threaded interrupt scheme instead of a workqueue approach. With this change, the phy status check moved into phy_change, which did not report back to the caller whether or not the interrupt was handled. This means that, in the case of a shared phy interrupt, only the first phydev's interrupt registers are checked (since phy_interrupt() would always return IRQ_HANDLED). This leads to interrupt storms when it is a secondary device that's actually the interrupt source. Signed-off-by: Brad Mouring Signed-off-by: David S. Miller

net: phy: Restore phy_resume() locking assumption

2018-02-27T19:32:09Z

commit f5e64032a799 ("net: phy: fix resume handling") changes the locking semantics for phy_resume() such that the caller now needs to hold the phy mutex. Not all call sites were adopted to this new semantic, resulting in warnings from the added WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the semantics, add a __phy_resume() and restore the old behavior of phy_resume(). Reported-by: Heiner Kallweit Fixes: f5e64032a799 ("net: phy: fix resume handling") Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

phy: add helpers for setting/clearing bits in PHY registers

2018-01-16T17:25:10Z

Based on the recent introduction of phy_modify add helpers for setting and clearing bits in PHY registers. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: phy: remove parameter new_link from phy_mac_interrupt()

2018-01-15T18:45:03Z

I see two issues with parameter new_link: 1. It's not needed. See also phy_interrupt(), works w/o this parameter. phy_mac_interrupt sets the state to PHY_CHANGELINK and triggers the state machine which then calls phy_read_status. And phy_read_status updates the link state. 2. phy_mac_interrupt is used in interrupt context and getting the link state may sleep (at least when having to access the PHY registers via MDIO bus). So let's remove it. Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: add phy_modify() accessor

2018-01-03T16:00:23Z

Add phy_modify() convenience accessor to complement the mdiobus counterpart. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: add paged phy register accessors

2018-01-03T16:00:23Z

Add a set of paged phy register accessors which are inherently safe in their design against other accesses interfering with the paged access. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: add unlocked accessors

2018-01-03T16:00:22Z

Add unlocked versions of the bus accessors, which allows access to the bus with all the tracing. These accessors validate that the bus mutex is held, which is a basic requirement for all mii bus accesses. Also added is a read-modify-write unlocked accessor with the same locking requirements. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: add helper to convert negotiation result to phy settings

2018-01-02T20:00:50Z

Add a helper to convert the result of the autonegotiation advertisment into the PHYs speed and duplex settings. If the result is full duplex, also extract the pause mode settings from the link partner advertisment. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: marvell10g: add MDI swap reporting

2018-01-02T20:00:49Z

Add reporting of the MDI swap to the Marvell 10G PHY driver by providing a generic implementation for the standard 10GBASE-T pair swap register and polarity register. We also support reading the MDI swap status for 1G and below from a PCS register. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller