user/sven/linux.git/include/linux/phy.h, branch v5.14.9

net: phy: Add 25G BASE-R interface mode

2021-06-12T20:08:57Z

Add 25gbase-r phy interface mode Signed-off-by: Steen Hegelund Signed-off-by: Bjarni Jonasson Reviewed-by: Andrew Lunn Reviewed-by: Russell King (Oracle) Signed-off-by: David S. Miller

net: phy: Introduce fwnode_get_phy_id()

2021-06-11T20:08:52Z

Extract phy_id from compatible string. This will be used by fwnode_mdiobus_register_phy() to create phy device using the phy_id. Signed-off-by: Calvin Johnson Signed-off-by: Ioana Ciornei Acked-by: Grant Likely Signed-off-by: David S. Miller

net: phy: Introduce phy related fwnode functions

2021-06-11T20:08:52Z

Define fwnode_phy_find_device() to iterate an mdiobus and find the phy device of the provided phy fwnode. Additionally define device_phy_find_device() to find phy device of provided device. Define fwnode_get_phy_node() to get phy_node using named reference. Signed-off-by: Calvin Johnson Signed-off-by: Ioana Ciornei Acked-by: Grant Likely Signed-off-by: David S. Miller

net: phy: Introduce fwnode_mdio_find_device()

2021-06-11T20:08:52Z

Define fwnode_mdio_find_device() to get a pointer to the mdio_device from fwnode passed to the function. Refactor of_mdio_find_device() to use fwnode_mdio_find_device(). Signed-off-by: Calvin Johnson Signed-off-by: Ioana Ciornei Acked-by: Grant Likely Signed-off-by: David S. Miller

net: phy: introduce PHY_INTERFACE_MODE_REVRMII

2021-06-07T19:20:18Z

The "reverse RMII" protocol name is a personal invention, derived from "reverse MII". Just like MII, RMII is an asymmetric protocol in that a PHY behaves differently than a MAC. In the case of RMII, for example: - the 50 MHz clock signals are either driven by the MAC or by an external oscillator (but never by the PHY). - the PHY can transmit extra in-band control symbols via RXD[1:0] which the MAC is supposed to understand, but a PHY isn't. The "reverse MII" protocol is not standardized either, except for this web document: https://www.eetimes.com/reverse-media-independent-interface-revmii-block-architecture/# In short, it means that the Ethernet controller speaks the 4-bit data parallel protocol from the perspective of a PHY (it acts like a PHY). This might mean that it implements clause 22 compatible registers, although that is optional - the important bit is that its pins can be connected to an MII MAC and it will 'just work'. In this discussion thread: https://lore.kernel.org/netdev/20210201214515.cx6ivvme2tlquge2@skbuf/ we agreed that it would be an abuse of terms to use the "RevMII" name for anything than the 4-bit parallel MII protocol. But since all the same concepts can be applied to the 2-bit Reduced MII protocol as well, here we are introducing a "Reverse RMII" protocol. This means: "behave like an RMII PHY". Signed-off-by: Vladimir Oltean Acked-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: Document phydev::dev_flags bits allocation

2021-05-26T20:15:55Z

Document the phydev::dev_flags bit allocation to allow bits 15:0 to define PHY driver specific behavior, bits 23:16 to be reserved for now, and bits 31:24 to hold generic PHY driver flags. Signed-off-by: Florian Fainelli Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20210526184617.3105012-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski

net: phy: genphy_loopback: add link speed configuration

2021-04-20T23:08:02Z

In case of loopback, in most cases we need to disable autoneg support and force some speed configuration. Otherwise, depending on currently active auto negotiated link speed, the loopback may or may not work. This patch was tested with following PHYs: TJA1102, KSZ8081, KSZ9031, AT8035, AR9331. Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller

net: phy: add genphy_c45_pma_suspend/resume

2021-04-19T23:19:44Z

Add generic PMA suspend and resume callback functions for C45 PHYs. Signed-off-by: Radu Pirea (NXP OSS) Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM

2021-04-09T23:37:04Z

Resume callback of the PHY driver is called after the one for the MAC driver. The PHY driver resume callback calls phy_init_hw(), and this is potentially problematic if the MAC driver calls phy_start() in its resume callback. One issue was reported with the fec driver and a KSZ8081 PHY which seems to become unstable if a soft reset is triggered during aneg. The new flag allows MAC drivers to indicate that they take care of suspending/resuming the PHY. Then the MAC PM callbacks can handle any dependency between MAC and PHY PM. Signed-off-by: Heiner Kallweit Signed-off-by: Jakub Kicinski

net: phy: add genphy_c45_loopback

2021-03-24T22:20:07Z

Add generic code to enable C45 PHY loopback into the common phy-c45.c file. This will allow C45 PHY drivers aceess this by setting .set_loopback. Suggested-by: Heiner Kallweit Signed-off-by: Wong Vee Khee Reviewed-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller