user/sven/linux.git/include/linux/phy.h, branch v5.8.10

net: phy: make phy_disable_interrupts() non-static

2020-06-24T21:52:49Z

We face an issue with rtl8211f, a pin is shared between INTB and PMEB, and the PHY Register Accessible Interrupt is enabled by default, so the INTB/PMEB pin is always active in polling mode case. As Heiner pointed out "I was thinking about calling phy_disable_interrupts() in phy_init_hw(), to have a defined init state as we don't know in which state the PHY is if the PHY driver is loaded. We shouldn't assume that it's the chip power-on defaults, BIOS or boot loader could have changed this. Or in case of dual-boot systems the other OS could leave the PHY in whatever state." Make phy_disable_interrupts() non-static so that it could be used in phy_init_hw() to have a defined init state. Suggested-by: Heiner Kallweit Signed-off-by: Jisheng Zhang Signed-off-by: David S. Miller

net: ethtool: Allow PHY cable test TDR data to configured

2020-05-27T06:22:21Z

Allow the user to configure where on the cable the TDR data should be retrieved, in terms of first and last sample, and the step between samples. Also add the ability to ask for TDR data for just one pair. If this configuration is not provided, it defaults to 1-150m at 1m intervals for all pairs. Signed-off-by: Andrew Lunn v3: Move the TDR configuration into a structure Add a range check on step Use NL_SET_ERR_MSG_ATTR() when appropriate Move TDR configuration into a nest Document attributes in the request Signed-off-by: David S. Miller

net: ethtool: Add generic parts of cable test TDR

2020-05-27T06:21:48Z

Add the generic parts of the code used to trigger a cable test and return raw TDR data. Any PHY driver which support this must implement the new driver op. Signed-off-by: Andrew Lunn v2 Update nxp-tja11xx for API change. Signed-off-by: David S. Miller

net: mdiobus: add clause 45 mdiobus accessors

2020-05-26T22:31:45Z

There is a recurring pattern throughout some of the PHY code converting a devad and regnum to our packed clause 45 representation. Rather than having this scattered around the code, let's put a common translation function in mdio.h, and provide some register accessors. Convert the phylib core, phylink, bcm87xx and cortina to use these. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

ethtool: provide UAPI for PHY Signal Quality Index (SQI)

2020-05-22T00:18:00Z

Signal Quality Index is a mandatory value required by "OPEN Alliance SIG" for the 100Base-T1 PHYs [1]. This indicator can be used for cable integrity diagnostic and investigating other noise sources and implement by at least two vendors: NXP[2] and TI[3]. [1] http://www.opensig.org/download/document/218/Advanced_PHY_features_for_automotive_Ethernet_V1.0.pdf [2] https://www.nxp.com/docs/en/data-sheet/TJA1100.pdf [3] https://www.ti.com/product/DP83TC811R-Q1 Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Reviewed-by: Michal Kubecek Signed-off-by: David S. Miller

net: phy: simplify phy_link_change arguments

2020-05-18T23:54:00Z

This function was introduced to allow for different handling of link up and link down events particularly with regard to the netif_carrier. The third argument do_carrier allowed the flag to be left unchanged. Since then the phylink has introduced an implementation that completely ignores the third parameter since it never wants to change the flag and the phylib always sets the third parameter to true so the flag is always changed. Therefore the third argument (i.e. do_carrier) is no longer necessary and can be removed. This also means that the phylib phy_link_down() function no longer needs its second argument. Signed-off-by: Doug Berger Signed-off-by: David S. Miller

net: ethtool: Add helpers for reporting test results

2020-05-10T19:28:41Z

The PHY drivers can use these helpers for reporting the results. The results get translated into netlink attributes which are added to the pre-allocated skbuf. v3: Poison phydev->skb Return -EMSGSIZE when ethnl_bcastmsg_put() fails Return valid error code when nla_nest_start() fails Use u8 for results Actually put u32 length into message v4: s/ENOTSUPP/EOPNOTSUPP/g Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Reviewed-by: Michal Kubecek Signed-off-by: Jakub Kicinski

net: ethtool: Add infrastructure for reporting cable test results

2020-05-10T19:28:41Z

Provide infrastructure for PHY drivers to report the cable test results. A netlink skb is associated to the phydev. Helpers will be added which can add results to this skb. Once the test has finished the results are sent to user space. When netlink ethtool is not part of the kernel configuration stubs are provided. It is also impossible to trigger a cable test, so the error code returned by the alloc function is of no consequence. v2: Include the status complete in the netlink notification message v4: Replace -EINVAL with -EMSGSIZE Signed-off-by: Andrew Lunn Reviewed-by: Michal Kubecek Signed-off-by: Jakub Kicinski

net: phy: Add support for polling cable test

2020-05-10T19:28:41Z

Some PHYs are not capable of generating interrupts when a cable test finished. They do however support interrupts for normal operations, like link up/down. As such, the PHY state machine would normally not poll the PHY. Add support for indicating the PHY state machine must poll the PHY when performing a cable test. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: phy: Add cable test support to state machine

2020-05-10T19:27:31Z

Running a cable test is desruptive to normal operation of the PHY and can take a 5 to 10 seconds to complete. The RTNL lock cannot be held for this amount of time, and add a new state to the state machine for running a cable test. The driver is expected to implement two functions. The first is used to start a cable test. Once the test has started, it should return. The second function is called once per second, or on interrupt to check if the cable test is complete, and to allow the PHY to report the status. v2: Rename phy_cable_test_abort to phy_abort_cable_test Return different extack when already running test Use phy_init_hw() to reset the PHY Reviewed-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: Jakub Kicinski