user/sven/linux.git/include/linux/phy.h, branch v6.9.3

net: phy: Add phy_support_eee() indicating MAC support EEE

2024-03-06T03:21:17Z

In order for EEE to operate, both the MAC and the PHY need to support it, similar to how pause works. With some exception - a number of PHYs have SmartEEE or AutoGrEEEn support in order to provide some EEE-like power savings with non-EEE capable MACs. Copy the pause concept and add the call phy_support_eee() which the MAC makes after connecting the PHY to indicate it supports EEE. phylib will then advertise EEE when auto-neg is performed. Signed-off-by: Andrew Lunn Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20240302195306.3207716-6-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

net: phy: Keep track of EEE configuration

2024-03-06T03:21:17Z

Have phylib keep track of the EEE configuration. This simplifies the MAC drivers, in that they don't need to store it. Future patches to phylib will also make use of this information to further simplify the MAC drivers. Reviewed-by: Russell King (Oracle) Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20240302195306.3207716-4-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

net: phy: Add phydev->enable_tx_lpi to simplify adjust link callbacks

2024-03-06T03:21:17Z

MAC drivers which support EEE need to know the results of the EEE auto-neg in order to program the hardware to perform EEE or not. The oddly named phy_init_eee() can be used to determine this, it returns 0 if EEE should be used, or a negative error code, e.g. -EOPPROTONOTSUPPORT if the PHY does not support EEE or negotiate resulted in it not being used. However, many MAC drivers get this wrong. Add phydev->enable_tx_lpi which indicates the result of the autoneg for EEE, including if EEE is administratively disabled with ethtool. The MAC driver can then access this in the same way as link speed and duplex in the adjust link callback. If enable_tx_lpi is true, the MAC should send low power indications and does not need to consider anything else with respect to EEE. Reviewed-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20240302195306.3207716-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

net: phy: add PHY_EEE_CAP2_FEATURES

2024-02-17T18:45:06Z

As a prerequisite for adding EEE CAP2 register support, complement PHY_EEE_CAP1_FEATURES with PHY_EEE_CAP2_FEATURES. For now only 2500baseT and 5000baseT modes are supported. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: mdio_bus: make mdio_bus_type const

2024-02-15T12:20:55Z

Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the mdio_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: Ricardo B. Marliere Reviewed-by: Andrew Lunn Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20240213-bus_cleanup-mdio-v1-1-f9e799da7fda@marliere.net Signed-off-by: Paolo Abeni

net: phy: provide whether link has changed in c37_read_status

2024-02-10T15:36:19Z

Some PHY driver might require additional regs call after genphy_c37_read_status() is called. Expand genphy_c37_read_status to provide a bool wheather the link has changed or not to permit PHY driver to skip additional regs call if nothing has changed. Every user of genphy_c37_read_status() is updated with the new additional bool. Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: add devm/of_phy_package_join helper

2024-02-10T15:36:19Z

Add devm/of_phy_package_join helper to join PHYs in a PHY package. These are variant of the manual phy_package_join with the difference that these will use DT nodes to derive the base_addr instead of manually passing an hardcoded value. An additional value is added in phy_package_shared, "np" to reference the PHY package node pointer in specific PHY driver probe_once and config_init_once functions to make use of additional specific properties defined in the PHY package node in DT. The np value is filled only with of_phy_package_join if a valid PHY package node is found. A valid PHY package node must have the node name set to "ethernet-phy-package". Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: add helper phy_advertise_eee_all

2024-02-07T02:58:45Z

Per default phylib preserves the EEE advertising at the time of phy probing. The EEE advertising can be changed from user space, in addition this helper allows to set the EEE advertising to all supported modes from drivers in kernel space. Suggested-by: Andrew Lunn Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20bfc471-aeeb-4ae4-ba09-7d6d4be6b86a@gmail.com Signed-off-by: Jakub Kicinski

net: phy: constify phydev->drv

2024-02-06T11:44:40Z

Device driver structures are shared between all devices that they match, and thus nothing should never write to the device driver structure through the phydev->drv pointer. Let's make this pointer const to catch code that attempts to do so. Suggested-by: Christian Marangi Signed-off-by: Russell King (Oracle) Link: https://lore.kernel.org/r/E1rVxXt-002YqY-9G@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni

ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side

2024-01-31T12:30:47Z

In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller