user/sven/linux.git/include/linux/platform_data/x86, branch v5.5.8

platform/x86: asus-wmi: Rename CHARGE_THRESHOLD to RSOC

2019-09-09T18:19:22Z

The device is officially called "Relative state of charge" (RSOC). At the same time add the missing DEVID from the name. Signed-off-by: Kristian Klausen Signed-off-by: Andy Shevchenko

platform/x86: asus-wmi: Reorder ASUS_WMI_CHARGE_THRESHOLD

2019-09-09T18:19:22Z

At the same time add a comment explaining what it is used for. Signed-off-by: Kristian Klausen Signed-off-by: Andy Shevchenko

platform/x86: asus-wmi: Add support for charge threshold

2019-08-16T09:38:48Z

Most newer ASUS laptops supports limiting the battery charge level, which help prolonging the battery life. Tested on a Zenbook UX430UNR. Signed-off-by: Kristian Klausen Signed-off-by: Andy Shevchenko

platform/x86: asus-wmi: fix CPU fan control on recent products

2019-07-30T11:14:38Z

Previously, asus-wmi was using the AGFN interface and FAN_CTRL device for CPU fan control. However, this code has been found to be not fully working on some recent products, and having checked the spec, these interfaces are marked as being removed from future products currently in development. The replacement appears to be the CPU_FAN device, added in spec version 8.3 (March 2014) and present on many modern Asus laptops. Add support for this device, and use it whenever it is detected. The older approach based on AGFN and FAN_CTRL is used as a fallback on products that do not have such device. Other than switching between automatic and full speed, there is no fan speed control through this new interface. Signed-off-by: Daniel Drake Signed-off-by: Andy Shevchenko

platform/x86: asus-wmi: cleanup AGFN fan handling

2019-07-30T11:14:38Z

The asus-wmi driver currently uses the "AGFN" interface and the FAN_CTRL device for fan control. According to the spec, this interface is very dated and marked as pending removal from products currently in development. Clean up the way that the AGFN fan is detected and handled, also preparing the driver for the introduction of an alternate fan control method needed to support recent Asus products. Not anticipating further development of this interface, simplify the code by dropping any notion of being able to control multiple AGFN fans (this was already limited to just a single fan through only exposing a single fan in sysfs). Check for the presence of AGFN fans at probe time, simplifying the code flow in asus_hwmon_sysfs_is_visible(). Signed-off-by: Daniel Drake Signed-off-by: Andy Shevchenko

platform/x86: asus: Rename "fan mode" to "fan boost mode"

2019-07-17T16:07:58Z

The Asus WMI spec indicates that the function being controlled here is called "Fan Boost Mode". The user-facing documentation also calls it this. The spec uses the term "fan mode" is used to refer to other things, including functionality expected to appear on future products. We missed this before as we are not dealing with the most readable of specs, and didn't forsee any confusion around shortening the name. Rename "fan mode" to "fan boost mode" to improve consistency with the spec and to avoid a future naming conflict. There is no interface breakage here since this has yet to be included in an official kernel release. I also updated the kernel version listed under ABI accordingly. Signed-off-by: Daniel Drake Acked-by: Yurii Pavlovskyi Signed-off-by: Andy Shevchenko

Merge tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86

2019-07-14T23:51:47Z

Pull x86 platform driver updates from Andy Shevchenko: "Gathered a bunch of x86 platform driver changes. It's rather big, since includes two big refactors and completely new driver: - ASUS WMI driver got a big refactoring in order to support the TUF Gaming laptops. Besides that, the regression with backlight being permanently off on various EeePC laptops has been fixed. - Accelerometer on HP ProBook 450 G0 shows wrong measurements due to X axis being inverted. This has been fixed. - Intel PMC core driver has been extended to be ACPI enumerated if the DSDT provides device with _HID "INT33A1". This allows to convert the driver to be pure platform and support new hardware purely based on ACPI DSDT. - From now on the Intel Speed Select Technology is supported thru a corresponding driver. This driver provides an access to the features of the ISST, such as Performance Profile, Core Power, Base frequency and Turbo Frequency. - Mellanox platform drivers has been refactored and now extended to support more systems, including new coming ones. - The OLPC XO-1.75 platform is now supported. - CB4063 Beckhoff Automation board is using PMC clocks, provided via pmc_atom driver, for ethernet controllers in a way that they can't be managed by the clock driver. The quirk has been extended to cover this case. - Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile the information of Chuwi Hi10 Air has been fixed to cover more models based on the same platform. - Xiaomi notebooks have WMI interface enabled. Thus, the driver to support it has been provided. It required some extension of the generic WMI library, which allows to propagate opaque context to the ->probe() of the individual drivers. This release includes debugfs clean up from Greg KH for several drivers that drop return code check and make debugfs absence or failure non-fatal. Also miscellaneous fixes here and there, mostly for Acer WMI and various Intel drivers" * tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits) platform/x86: Fix PCENGINES_APU2 Kconfig warning tools/power/x86/intel-speed-select: Add .gitignore file platform/x86: mlx-platform: Fix error handling in mlxplat_init() platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1" platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds platform/x86: asus-wmi: Use dev_get_drvdata() Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Add more reset cause attributes platform/x86: mlx-platform: Modify DMI matching order platform/x86: mlx-platform: Add regmap structure for the next generation systems platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation platform/x86: mlx-platform: Move regmap initialization before all drivers activation MAINTAINERS: Update for Intel Speed Select Technology tools/power/x86: A tool to validate Intel Speed Select commands platform/x86: ISST: Restore state on resume platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI platform/x86: ISST: Add Intel Speed Select mmio interface platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

platform/x86: asus-wmi: Switch fan boost mode

2019-06-17T12:22:47Z

The WMI exposes a write-only device ID where up to three fan modes can be switched on some laptops (TUF Gaming FX505GM). There is a hotkey combination Fn-F5 that does have a fan icon, which is designed to toggle between fan modes. The DSTS of the device ID returns information about the presence of this capability and the presence of each of the two additional fan modes as a bitmask (0x01 - overboost present, 0x02 - silent present) [1]. Add a SysFS entry that reads the last written value and updates value in WMI on write and a hotkey handler that toggles the modes taking into account their availability according to DSTS. Modes: * 0x00 - normal or balanced, * 0x01 - overboost, increased fan RPM, * 0x02 - silent, decreased fan RPM [1] Link: https://lkml.org/lkml/2019/4/12/110 Signed-off-by: Yurii Pavlovskyi Suggested-by: Daniel Drake Signed-off-by: Andy Shevchenko

platform/x86: asus-wmi: Improve DSTS WMI method ID detection

2019-06-17T12:22:47Z

The DSTS method detection mistakenly selects DCTS instead of DSTS if nothing is returned when the method ID is not defined in WMNB. As a result, the control of keyboard backlight is not functional for TUF Gaming series laptops. Implement detection based on _UID of the WMI device instead. There is evidence that DCTS is handled by ACPI WMI devices that have _UID ASUSWMI, whereas none of the devices without ASUSWMI respond to DCTS and DSTS is used instead [1]. DSDT examples: FX505GM (_UID ATK): Method (WMNB, 3, Serialized) { ... If ((Local0 == 0x53545344)) { ... Return (Zero) } ... // No return } K54C (_UID ATK): Method (WMNB, 3, Serialized) { ... If ((Local0 == 0x53545344)) { ... Return (0x02) } ... Return (0xFFFFFFFE) } [1] Link: https://lkml.org/lkml/2019/4/11/322 Signed-off-by: Yurii Pavlovskyi Suggested-by: Daniel Drake Signed-off-by: Andy Shevchenko