Linux Kernel https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v3.16.52 2014-06-14T21:43:23Z 2014-06-14T21:43:23Z Linus Torvalds torvalds@linux-foundation.org 2014-06-14T21:43:23Z urn:sha1:503698e12d68f6144b408b11156ad315943ffb53 Pull hwmon updates from Guenter Roeck: - new driver for Sensirion SHTC1 humidity / temperature sensor - convert ltc4151 and vexpress drivers to use devm functions - drop generic chip detection from lm85 driver - avoid forward declarations in atxp1 driver - fix sign extensions in ina2xx driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: vexpress: Use devm helper for hwmon device registration hwmon: (atxp1) Avoid forward declaration hwmon: add support for Sensirion SHTC1 sensor hwmon: (ltc4151) Convert to devm_hwmon_device_register_with_groups hwmon: (lm85) Drop generic detection hwmon: (ina2xx) Cast to s16 on shunt and current regs 2014-06-12T21:27:40Z Linus Torvalds torvalds@linux-foundation.org 2014-06-12T21:27:40Z urn:sha1:f9da455b93f6ba076935b4ef4589f61e529ae046 Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ... 2014-06-12T20:08:09Z Linus Torvalds torvalds@linux-foundation.org 2014-06-12T20:08:09Z urn:sha1:7c574cf6aeb75920ba4d3af937bb1b3c42785ac4 Pull LED updates from Bryan Wu: "I just found merge window is open and I'm quite busy and almost forget to send out this pull request. Thanks Russell and Alexandre ping me about this. So basically we got some clean up and leds-pwm fixing patches from Russell" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: Remove duplicated OOM message for individual driver drivers/leds: Replace __get_cpu_var use through this_cpu_ptr leds: lp55xx: add DT bindings for LP55231 leds: 88pm860x: Fix missing refcount decrement for parent of_node leds: 88pm860x: Use of_get_child_by_name leds: leds-pwm: add DT support for LEDs wired to supply leds: leds-pwm: implement PWM inversion leds: leds-pwm: convert OF parsing code to use led_pwm_add() leds: leds-pwm: provide a common function to setup a single led-pwm device leds: pca9685: Remove leds-pca9685 driver dell-led: add mic mute led interface 2014-06-12T15:36:48Z Tomas Pop Tomas.Pop@sensirion.com 2014-06-05T22:24:19Z urn:sha1:1a539d372edd9832444e7a3daa710c444c014dc9 Add support for Sensirion SHTC1 and compatible temperature and humidity sensors. Signed-off-by: Tomas Pop <tomas.pop@sensirion.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 2014-06-11T21:06:55Z Linus Torvalds torvalds@linux-foundation.org 2014-06-11T21:06:55Z urn:sha1:7f33e7241d3dbad3c0563fd1fc79fc9380b5c351 Pull pwm changes from Thierry Reding: "The majority of these changes are cleanups and fixes across all drivers. Redundant error messages are removed and more PWM controllers set the .can_sleep flag to signal that they can't be used in atomic context. Support is added for the Broadcom Kona family of SoCs and the Intel LPSS driver can now probe PCI devices in addition to ACPI devices. Upon shutdown, the pwm-backlight driver will now power off the backlight. It also uses the new descriptor-based GPIO API for more concise GPIO handling. A large chunk of these changes also converts platforms to use the lookup mechanism rather than relying on the global number space to reference PWM devices. This is largely in preparation for more unification and cleanups in future patches. Eventually it will allow the legacy PWM API to be removed" * tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (38 commits) pwm: fsl-ftm: set pwm_chip can_sleep flag pwm: ab8500: Fix wrong value shift for disable/enable PWM pwm: samsung: do not set manual update bit in pwm_samsung_config pwm: lp3943: Set pwm_chip can_sleep flag pwm: atmel: set pwm_chip can_sleep flag pwm: mxs: set pwm_chip can_sleep flag pwm: tiehrpwm: inline accessor functions pwm: tiehrpwm: don't build PM related functions when not needed pwm-backlight: retrieve configured PWM period leds: leds-pwm: retrieve configured PWM period ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookup ARM: shmobile: armadillo: use PWM_LOOKUP to initialize struct pwm_lookup ARM: OMAP3: Beagle: use PWM_LOOKUP to initialize struct pwm_lookup pwm: modify PWM_LOOKUP to initialize all struct pwm_lookup members ARM: pxa: hx4700: initialize all the struct pwm_lookup members ARM: OMAP3: Beagle: initialize all the struct pwm_lookup members pwm: renesas-tpu: remove unused struct tpu_pwm_platform_data ARM: shmobile: armadillo: initialize all struct pwm_lookup members pwm: add period and polarity to struct pwm_lookup pwm: twl: Really disable twl6030 PWMs ... 2014-06-11T15:35:34Z Linus Torvalds torvalds@linux-foundation.org 2014-06-11T15:35:34Z urn:sha1:e413a19a8ef49ae3b76310bb569dabe66b22f5a3 Pull MTD updates from Brian Norris: - refactor m25p80.c driver for use as a general SPI NOR framework for other drivers which may speak to SPI NOR flash without providing full SPI support (i.e., not part of drivers/spi/) - new Freescale QuadSPI driver (utilizing new SPI NOR framework) - updates for the STMicro "FSM" SPI NOR driver - fix sync/flush behavior on mtd_blkdevs - fixup subpage write support on a few NAND drivers - correct the MTD OOB test for odd-sized OOB areas - add BCH-16 support for OMAP NAND - fix warnings and trivial refactoring - utilize new ECC DT bindings in pxa3xx NAND driver - new LPDDR NVM driver - address a few assorted bugs caught by Coverity - add new imx6sx support for GPMI NAND - use a bounce buffer for NAND when non-DMA-able buffers are used * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits) mtd: gpmi: add gpmi support for imx6sx mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE mtd: bf5xx_nand: use the managed version of kzalloc mtd: pxa3xx_nand: make the driver work on big-endian systems mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error mtd: nand: r852: correct write_buf loop bounds mtd: nand_bbt: handle error case for nand_create_badblock_pattern() mtd: nand_bbt: remove unused variable mtd: maps: sc520cdp: fix warnings mtd: slram: fix unused variable warning mtd: pfow: remove unused variable mtd: lpddr: fix Kconfig dependency, for I/O accessors mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling mtd: nand: Warn the user if the selected ECC strength is too weak mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? mtd: nand: omap: add support for BCH16_ECC - NAND driver updates mtd: nand: omap: add support for BCH16_ECC - ELM driver updates mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates ... 2014-06-11T02:16:36Z Linus Torvalds torvalds@linux-foundation.org 2014-06-11T02:16:36Z urn:sha1:dfb945473ae8528fd885607b6fa843c676745e0c Pull watchdog updates from Wim Van Sebroeck: "This contains: - addition of the Intel MID watchdog - removal of W83697HF and W83697UG drivers (code was merged into w83627hf_wdt driver) - addition of Armada 375/380 SoC support - conversion of imx2_wdt to regmap API and to watchdog core API - lots of other small improvements and fixes" [ Wim was also tagged by gmail as a spammer, but not delayed by days unlike Ben ] * git://www.linux-watchdog.org/linux-watchdog: (25 commits) x86: intel-mid: add watchdog platform code for Merrifield watchdog: add Intel MID watchdog driver support watchdog: sp805: Set watchdog_device->timeout from ->set_timeout() booke/watchdog: refine and clean up the codes watchdog: iop_wdt only builds for mach-iop13xx watchdog: Remove drivers for W83697HF and W83697UG watchdog: w83627hf_wdt: Add early_disable module parameter ARM: mvebu: Add A375/A380 watchdog binding documentation watchdog: orion: Add Armada 375/380 SoC support watchdog: orion: Introduce per-SoC enabled() function watchdog: orion: Introduce per-SoC stop() function watchdog: orion: Remove unneeded atomic access watchdog: orion: Introduce a SoC-specific RSTOUT mapping watchdog: orion: Move the register ioremap'ing to its own function watchdog: xilinx: Make of_device_id array const watchdog: imx2_wdt: convert to watchdog core api watchdog: imx2_wdt: convert to use regmap API. watchdog: imx2_wdt: Sort the header files alphabetically watchdog: ath79_wdt: switch to clk_prepare/clk_disable watchdog: ath79_wdt: avoid spurious restarts on AR934x ... 2014-06-10T19:48:16Z David Cohen david.a.cohen@linux.intel.com 2014-04-15T20:06:05Z urn:sha1:87a1ef8058d9ab26bc289ea4f27bc3c11ce9acb8 Add initial Intel MID watchdog driver support. This driver is an initial implementation of generic Intel MID watchdog driver. Currently it supports Intel Merrifield platform. Signed-off-by: Eric Ernst <eric.ernst@intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 2014-06-10T01:46:02Z Linus Torvalds torvalds@linux-foundation.org 2014-06-10T01:46:02Z urn:sha1:f4f9b8fc73f9aa93744f0e91e18f367d7766f523 Pull input updates from Dmitry Torokhov: "A big update to the Atmel touchscreen driver, devm support for polled input devices, several drivers have been converted to using managed resources, and assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits) Input: synaptics - fix resolution for manually provided min/max Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_version Input: max8997_haptic - add error handling for regulator and pwm Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set Input: elantech - deal with clickpads reporting right button events Input: edt-ft5x06 - fix an i2c write for M09 support Input: omap-keypad - remove platform data support ARM: OMAP2+: remove unused omap4-keypad file and code Input: ab8500-ponkey - switch to using managed resources Input: max8925_onkey - switch to using managed resources Input: 88pm860x-ts - switch to using managed resources Input: 88pm860x_onkey - switch to using managed resources Input: intel-mid-touch - switch to using managed resources Input: wacom - process outbound for newer Cintiqs Input: wacom - set stylus_in_proximity when pen is in range DTS: ARM: OMAP3-N900: Add tsc2005 support Input: tsc2005 - add DT support Input: add common DT binding for touchscreens Input: jornada680_kbd - switch top using managed resources Input: adp5520-keys - switch to using managed resources ... 2014-06-06T18:48:46Z Linus Torvalds torvalds@linux-foundation.org 2014-06-06T18:48:46Z urn:sha1:2732ea9e8528ec3d065e04ecd357f61eec4869a8 Pull IOMMU updates from Joerg Roedel: "The changes include: - a new IOMMU driver for ARM Renesas SOCs - updates and fixes for the ARM Exynos driver to bring it closer to a usable state again - convert the AMD IOMMUv2 driver to use the mmu_notifier->release call-back instead of the task_exit notifier - random other fixes and minor improvements to a number of other IOMMU drivers" * tag 'iommu-updates-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (54 commits) iommu/msm: Use devm_ioremap_resource to simplify code iommu/amd: Fix recently introduced compile warnings arm/ipmmu-vmsa: Fix compile error iommu/exynos: Fix checkpatch warning iommu/exynos: Fix trivial typo iommu/exynos: Remove invalid symbol dependency iommu: fsl_pamu.c: Fix for possible null pointer dereference iommu/amd: Remove duplicate checking code iommu/amd: Handle parallel invalidate_range_start/end calls correctly iommu/amd: Remove IOMMUv2 pasid_state_list iommu/amd: Implement mmu_notifier_release call-back iommu/amd: Convert IOMMUv2 state_table into state_list iommu/amd: Don't access IOMMUv2 state_table directly iommu/ipmmu-vmsa: Support clearing mappings iommu/ipmmu-vmsa: Remove stage 2 PTE bits definitions iommu/ipmmu-vmsa: Support 2MB mappings iommu/ipmmu-vmsa: Rewrite page table management iommu/ipmmu-vmsa: PMD is never folded, PUD always is iommu/ipmmu-vmsa: Set the PTE contiguous hint bit when possible iommu/ipmmu-vmsa: Define driver-specific page directory sizes ...