user/sven/linux.git/include/linux/platform_data, branch v4.13.14

Merge tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2017-08-13T19:30:17Z

Pull staging/iio fixes from Greg KH: "Here are some Staging and IIO driver fixes for 4.13-rc5. Nothing major, just a number of small fixes for reported issues. All of these have been in linux-next for a while now with no reported issues. Full details are in the shortlog" * tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING iio: aspeed-adc: wait for initial sequence. iio: accel: bmc150: Always restore device to normal mode after suspend-resume staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0 iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits iio: accel: st_accel: add SPI-3wire support iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications" iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable iio: pressure: st_pressure_core: disable multiread by default for LPS22HB iio: light: tsl2563: use correct event code

Merge tag 'iio-fixes-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2017-07-24T03:54:31Z

Jonathan writes: First set of IIO fixes for the 4.13 cycle. * ad2s1210 - Fix negative angular velocity reads (identified by a gcc 7 warning) * aspeed-adc - Wait for initialization sequence to finish before enabling channels. Without it no channels work. * axp288 - Revert a patch that dropped some bogus register mods. No one is entirely sure why but it breaks charging on some devices. - Fix GPADC pin read returning 0. Turns out a small sleep is needed. * bmc150 - Make sure device is restored to normal state after suspend / resume cycle. Otherwise, simple sysfs reads are broken. * tsl2563 - fix wrong event code. * st-accel - add spi 3-wire support. Needed to fix the lsm303agr accelerometer which only had 3 wires in all cases. Side effect is to enable optional 3-wire support for other devices. * st-pressure - disable multiread by default for LPS22HB (only effects SPI) * sun4i-gpadc-iio - fix unbalanced irq enable / disable * vf610 - Fix VALT slection for REFSEL bits - ensures we are using the right reference pins.

mmc: host: omap_hsmmc: remove unused platform callbacks

2017-07-17T13:05:52Z

Remove unused callbacks in the omap_hsmmc_platform_data structure Signed-off-by: Faiz Abbas Acked-by: Tony Lindgren Signed-off-by: Ulf Hansson

ARM: samsung: usb-ohci: move inline before return type

2017-07-12T23:26:05Z

Make the code like the rest of the kernel. Link: http://lkml.kernel.org/r/667a515b8d0f10f2465d519f8595edd91552fc5e.1499284835.git.joe@perches.com Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

2017-07-10T16:22:48Z

Pull HID updates from Jiri Kosina: - open/close tracking improvements from Dmitry Torokhov - battery support improvements in Wacom driver from Jason Gerecke - Win8 support fixes from Benjamin Tissories and Hans de Geode - misc fixes to Intel-ISH driver from Arnd Bergmann - support for quite a few new devices and small assorted fixes here and there * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (35 commits) HID: intel-ish-hid: Enable Gemini Lake ish driver HID: intel-ish-hid: Enable Cannon Lake ish driver HID: wacom: fix mistake in printk HID: multitouch: optimize the sticky fingers timer HID: multitouch: fix rare Win 8 cases when the touch up event gets missing HID: multitouch: use BIT macro HID: Add driver for Retrode2 joypad adapter HID: multitouch: Add support for Google Rose Touchpad HID: multitouch: Support PTP Stick and Touchpad device HID: core: don't use negative operands when shift HID: apple: Use country code to detect ISO keyboards HID: remove no longer used hid->open field greybus: hid: remove custom locking from gb_hid_open/close HID: usbhid: remove custom locking from usbhid_open/close HID: i2c-hid: remove custom locking from i2c_hid_open/close HID: serialize hid_hw_open and hid_hw_close HID: usbhid: do not rely on hid->open when deciding to do IO HID: hiddev: use hid_hw_power instead of usbhid_get/put_power HID: hiddev: use hid_hw_open/close instead of usbhid_open/close HID: asus: Add support for Zen AiO MD-5110 keyboard ...

Merge branches 'for-4.13/multitouch', 'for-4.13/retrode', 'for-4.13/transport-open-close-consolidation', 'for-4.13/upstream' and 'for-4.13/wacom' into for-linus

2017-07-10T09:11:25Z

Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux

2017-07-10T01:48:37Z

Pull drm updates from Dave Airlie: "This is the main pull request for the drm, I think I've got one later driver pull for mediatek SoC driver, I'm undecided on if it needs to go to you yet. Otherwise summary below: Core drm: - Atomic add driver private objects - Deprecate preclose hook in modern drivers - MST bandwidth tracking - Use kvmalloc in more places - Add mode_valid hook for crtc/encoder/bridge - Reduce sync_file construction time - Documentation updates - New DRM synchronisation object support New drivers: - pl111 - pl111 CLCD display controller Panel: - Innolux P079ZCA panel driver - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels - panel-samsung-s6e3ha2: Add s6e3hf2 panel support i915: - SKL+ watermark fixes - G4x/G33 reset improvements - DP AUX backlight improvements - Buffer based GuC/host communication - New getparam for (sub)slice infomation - Cannonlake and Coffeelake initial patches - Execbuf optimisations radeon/amdgpu: - Lots of Vega10 bug fixes - Preliminary raven support - KIQ support for compute rings - MEC queue management rework - DCE6 Audio support - SR-IOV improvements - Better radeon/amdgpu selection support nouveau: - HDMI stereoscopic support - Display code rework for >= GM20x GPUs msm: - GEM rework for fine-grained locking - Per-process pagetable work - HDMI fixes for Snapdragon 820. vc4: - Remove 256MB CMA limit from vc4 - Add out-fence support - Add support for cygnus - Get/set tiling ioctls support - Add T-format tiling support for scanout zte: - add VGA support. etnaviv: - Thermal throttle support for newer GPUs - Restore userspace buffer cache performance - dma-buf sync fix stm: - add stm32f429 display support exynos: - Rework vblank handling - Fixup sw-trigger code sun4i: - V3s display engine support - HDMI support for older SoCs - Preliminary work on dual-pipeline SoCs. rcar-du: - VSP work imx-drm: - Remove counter load enable from PRE - Double read/write reduction flag support tegra: - Documentation for the host1x and drm driver. - Lots of staging ioctl fixes due to grate project work. omapdrm: - dma-buf fence support - TILER rotation fixes" * tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits) drm: Remove unused drm_file parameter to drm_syncobj_replace_fence() drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu. amdgpu: Set cik/si_support to 1 by default if radeon isn't built drm/amdgpu/gfx9: fix driver reload with KIQ drm/amdgpu/gfx8: fix driver reload with KIQ drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay drm/ttm: Fix use-after-free in ttm_bo_clean_mm drm/amd/amdgpu: move get memory type function from early init to sw init drm/amdgpu/cgs: always set reference clock in mode_info drm/amdgpu: fix vblank_time when displays are off drm/amd/powerplay: power value format change for Vega10 drm/amdgpu/gfx9: support the amdgpu.disable_cu option drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10 drm/amdgpu: Make amdgpu_cs_parser_init static (v2) drm/amdgpu/cs: fix a typo in a comment drm/amdgpu: Fix the exported always on CU bitmap drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup drm/amd/powerplay/cz: print message if smc message fails drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-07-08T19:39:37Z

Pull input updates from Dmitry Torokhov: - a new driver for STM FingerTip touchscreen - a new driver for D-Link DIR-685 touch keys - updated list of supported devices in xpad driver - other assorted updates and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits) MAINTAINERS: update input subsystem patterns Input: introduce KEY_ASSISTANT Input: xpad - sync supported devices with XBCD Input: xpad - sync supported devices with 360Controller Input: xen-kbdfront - use string constants from PV protocol Input: stmfts - mark all PM functions as __maybe_unused Input: add support for the STMicroelectronics FingerTip touchscreen Input: add D-Link DIR-685 touchkeys driver Input: s3c2410_ts - handle return value of clk_prepare_enable Input: axp20x-pek - add wakeup support Input: synaptics-rmi4 - use %phN to form F34 configuration ID Input: synaptics-rmi4 - change a char type to u8 Input: sparse-keymap - remove sparse_keymap_free() Input: tsc2007 - move header file out of I2C realm Input: mms114 - move header file out of I2C realm Input: mcs - move header file out of I2C realm Input: lm8323 - move header file out of I2C realm Input: elantech - force relative mode on a certain module Input: elan_i2c - add support for fetching chip type on newer hardware Input: elan_i2c - check if device is there before really probing ...

Merge tag 'backlight-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

2017-07-07T20:38:26Z

Pull backlight updates from Lee Jones: "Core Framework: - Report correct error status to user Fix-ups: - Move Backlight headers out of I2C (adp8860, adp8870)" * tag 'backlight-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: video: adp8870: move header file out of I2C realm backlight: adp8860: Move header file out of I2C realm backlight: Report error on failure

Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2017-07-07T19:40:27Z

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...