user/sven/linux.git/include/linux/platform_data, branch v4.14.334

platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask

2022-09-15T10:23:49Z

[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ] On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI specification (see Table 4.13 "PM1 Control Registers Fixed Hardware Feature Control Bits" for the details). Fix the mask and other related definitions accordingly. Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin

dmaengine: imx-sdma: fix size check for sdma script_number

2020-01-27T13:46:50Z

[ Upstream commit bd73dfabdda280fc5f05bdec79b6721b4b2f035f ] Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (41) exceed the size of structure sdma_script_start_addrs(40), thus cause memory corrupt such as slob block header so that kernel trap into while() loop forever in slob_free(). Please refer to below code piece in imx-sdma.c: for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; /* memory corrupt here */ That issue was brought by commit a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (38->41 3 scripts added) not align with script number added in sdma_script_start_addrs(2 scripts). Fixes: a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") Cc: stable@vger.kernel Link: https://www.spinics.net/lists/arm-kernel/msg754895.html Signed-off-by: Robin Gong Reported-by: Jurgen Lambrecht Link: https://lore.kernel.org/r/1569347584-3478-1-git-send-email-yibin.gong@nxp.com [vkoul: update the patch title] Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: dw-dmac: implement dma protection control setting

2019-12-17T19:38:07Z

[ Upstream commit 7b0c03ecc42fb223baf015877fee9d517c2c8af1 ] This patch adds a new device-tree property that allows to specify the dma protection control bits for the all of the DMA controller's channel uniformly. Setting the "correct" bits can have a huge impact on the PPC460EX and APM82181 that use this DMA engine in combination with a DesignWare' SATA-II core (sata_dwc_460ex driver). In the OpenWrt Forum, the user takimata reported that: |It seems your patch unleashed the full power of the SATA port. |Where I was previously hitting a really hard limit at around |82 MB/s for reading and 27 MB/s for writing, I am now getting this: | |root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 13.65s |user 0m 0.01s |sys 0m 11.89s | |root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 8.41s |user 0m 0.01s |sys 0m 4.70s | |This means: 121 MB/s reading and 75 MB/s writing! | |The drive is a WD Green WD10EARX taken from an older MBL Single. |I repeated the test a few times with even larger files to rule out |any caching, I'm still seeing the same great performance. OpenWrt is |now completely on par with the original MBL firmware's performance. Another user And.short reported: |I can report that your fix worked! Boots up fine with two |drives even with more partitions, and no more reboot on |concurrent disk access! A closer look into the sata_dwc_460ex code revealed that the driver did initally set the correct protection control bits. However, this feature was lost when the sata_dwc_460ex driver was converted to the generic DMA driver framework. BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55 BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50 Fixes: 8b3444852a2b ("sata_dwc_460ex: move to generic DMA driver") Reviewed-by: Andy Shevchenko Signed-off-by: Christian Lamparter Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction

2019-11-24T07:22:57Z

[ Upstream commit 9524d6b265f9b2b9a61fceb2ee2ce1c2a83e39ca ] Clang warns when implicitly converting from one enumerated type to another. Avoid this by using the equivalent value from the expected type. In file included from drivers/dma/ep93xx_dma.c:30: ./include/linux/platform_data/dma-ep93xx.h:88:10: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] return DMA_NONE; ~~~~~~ ^~~~~~~~ 1 warning generated. Reported-by: Nick Desaulniers Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

clk: x86: Add system specific quirk to mark clocks as critical

2019-05-08T05:20:53Z

commit 7c2e07130090ae001a97a6b65597830d6815e93e upstream. Since commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are unconditionally gated off. Unfortunately this will break systems where these clocks are used for external purposes beyond the kernel's knowledge. Fix it by implementing a system specific quirk to mark the necessary pmc_plt_clks as critical. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: David Müller Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman

hwmon: (ina2xx) fix sysfs shunt resistor read access

2018-10-04T00:00:58Z

[ Upstream commit 3ad867001c91657c46dcf6656d52eb6080286fd5 ] fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by: Lothar Felten Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-09-11T03:35:46Z

Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch contains platform updates for 32- and 64-bit ARM, including defconfig updates to enable new options, drivers and platforms. There are also a few fixes and cleanups for some existing vendors. Some of the things worth highlighting here are: - Enabling new crypt drivers on arm64 defconfig - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig - Debug support enabled for Renesas r8a7743 - Various config updates for Renesas platforms (sound, USB, other drivers) - Platform support (including SMP) for TI dra762 - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code" * tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in arm64: defconfig: enable rockchip graphics MAINTAINERS: Update Cavium ThunderX2 entry ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: s3c24xx: Fix NAND ECC mode for mini2440 board ARM: davinci_all_defconfig: enable tinydrm and ST7586 arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 MAINTAINERS: update ARM/ZTE entry soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add recently added crypto drivers as modules arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG ...

Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd

2017-09-09T21:48:21Z

Pull MTD updates from Boris Brezillon: "General updates: - Constify pci_device_id in various drivers - Constify device_type - Remove pad control code from the Gemini driver - Use %pOF to print OF node full_name - Various fixes in the physmap_of driver - Remove unused vars in mtdswap - Check devm_kzalloc() return value in the spear_smi driver - Check clk_prepare_enable() return code in the st_spi_fsm driver - Create per MTD device debugfs enties NAND updates, from Boris Brezillon: - Fix memory leaks in the core - Remove unused NAND locking support - Rename nand.h into rawnand.h (preparing support for spi NANDs) - Use NAND_MAX_ID_LEN where appropriate - Fix support for 20nm Hynix chips - Fix support for Samsung and Hynix SLC NANDs - Various cleanup, improvements and fixes in the qcom driver - Fixes for bugs detected by various static code analysis tools - Fix mxc ooblayout definition - Add a new part_parsers to tmio and sharpsl platform data in order to define a custom list of partition parsers - Request the reset line in exclusive mode in the sunxi driver - Fix a build error in the orion-nand driver when compiled for ARMv4 - Allow 64-bit mvebu platforms to select the PXA3XX driver SPI NOR updates, from Cyrille Pitchen and Marek Vasut: - add support to the JEDEC JESD216B specification (SFDP tables). - add support to the Intel Denverton SPI flash controller. - fix error recovery for Spansion/Cypress SPI NOR memories. - fix 4-byte address management for the Aspeed SPI controller. - add support to some Microchip SST26 memory parts - remove unneeded pinctrl header Write a message for tag:" * tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits) mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized mtd: nand: make Samsung SLC NAND usable again mtd: nand: tmio: Register partitions using the parsers mfd: tmio: Add partition parsers platform data mtd: nand: sharpsl: Register partitions using the parsers mtd: nand: sharpsl: Add partition parsers platform data mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller mtd: nand: qcom: support for IPQ4019 QPIC NAND controller dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation dt-bindings: qcom_nandc: fix the ipq806x device tree example mtd: nand: qcom: support for different DEV_CMD register offsets mtd: nand: qcom: QPIC data descriptors handling mtd: nand: qcom: enable BAM or ADM mode mtd: nand: qcom: erased codeword detection configuration mtd: nand: qcom: support for read location registers mtd: nand: qcom: support for passing flags in DMA helper functions mtd: nand: qcom: add BAM DMA descriptor handling mtd: nand: qcom: allocate BAM transaction mtd: nand: qcom: DMA mapping support for register read buffer ...

Merge branch 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2017-09-09T21:18:40Z

Pull i2c updates from Wolfram Sang: - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS - quite some driver updates - cleanups for the i2c-mux subsystem - some subsystem-wide constification - further cleanup of include/linux/i2c * 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits) i2c: sprd: Fix undefined reference errors i2c: nomadik: constify amba_id i2c: versatile: Make i2c_algo_bit_data const i2c: busses: make i2c_adapter_quirks const i2c: busses: make i2c_adapter const i2c: busses: make i2c_algorithm const i2c: Add Spreadtrum I2C controller driver dt-bindings: i2c: Add Spreadtrum I2C controller documentation i2c-cht-wc: make cht_wc_i2c_adap_driver static MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones i2c: i801: Restore the presence state of P2SB PCI device after reading BAR MAINTAINERS: drop entry for Blackfin I2C and Sonic's email blackfin: merge the two TWI header files i2c: davinci: Preserve return value of devm_clk_get i2c: mediatek: Add i2c compatible for MediaTek MT7622 dt-bindings: i2c: Add MediaTek MT7622 i2c binding dt-bindings: i2c: modify information formats i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support ...