user/sven/linux.git/include/linux/platform_data, branch v4.9.51

Merge tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2016-10-11T20:22:22Z

Pull media updates from Mauro Carvalho Chehab: - Documentation improvements: conversion of all non-DocBook documents to Sphinx and lots of fixes to the uAPI media book - New PCI driver for Techwell TW5864 media grabber boards - New SoC driver for ATMEL Image Sensor Controller - Removal of some obsolete SoC drivers (s5p-tv driver and soc_camera drivers) - Addition of ST CEC driver - Lots of drivers fixes, improvements and additions * tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) [media] ttusb_dec: avoid the risk of go past buffer [media] cx23885: Fix some smatch warnings [media] si2165: switch to regmap [media] si2165: use i2c_client->dev instead of i2c_adapter->dev for logging [media] si2165: Remove legacy attach [media] cx231xx: attach si2165 driver via i2c_client [media] cx231xx: Prepare for attaching new style i2c_client DVB demod drivers [media] cx23885: attach si2165 driver via i2c_client [media] si2165: support i2c_client attach [media] si2165: avoid division by zero [media] rcar-vin: add R-Car gen2 fallback compatibility string [media] lgdt3306a: remove 20*50 msec unnecessary timeout [media] cx25821: Remove deprecated create_singlethread_workqueue [media] cx25821: Drop Freeing of Workqueue [media] cxd2841er: force 8MHz bandwidth for DVB-C if specified bw not supported [media] redrat3: hardware-specific parameters [media] redrat3: remove hw_timeout member [media] cxd2841er: BER and SNR reading for ISDB-T [media] dvb-usb: avoid link error with dib3000m{b,c| [media] dvb-usb: split out common parts of dibusb ...

Merge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2016-10-07T00:13:54Z

Pull dmaengine updates from Vinod Koul: "This is bit large pile of code which bring in some nice additions: - Error reporting: we have added a new mechanism for users of dmaenegine to register a callback_result which tells them the result of the dma transaction. Right now only one user (ntb) is using it. - As we discussed on KS mailing list and pointed out NO_IRQ has no place in kernel, this also remove NO_IRQ from dmaengine subsystem (both arm and ppc users) - Support for IOMMU slave transfers and its implementation for arm. - To get better build coverage, enable COMPILE_TEST for bunch of driver, and fix the warning and sparse complaints on these. - Apart from above, usual updates spread across drivers" * tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits) async_pq_val: fix DMA memory leak dmaengine: virt-dma: move function declarations dmaengine: omap-dma: Enable burst and data pack for SG DT: dmaengine: rcar-dmac: document R8A7743/5 support dmaengine: fsldma: Unmap region obtained by of_iomap dmaengine: jz4780: fix resource leaks on error exit return dma-debug: fix ia64 build, use PHYS_PFN dmaengine: coh901318: fix integer overflow when shifting more than 32 places dmaengine: edma: avoid uninitialized variable use dma-mapping: fix m32r build warning dma-mapping: fix ia64 build, use PHYS_PFN dmaengine: ti-dma-crossbar: enable COMPILE_TEST dmaengine: omap-dma: enable COMPILE_TEST dmaengine: edma: enable COMPILE_TEST dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs dmaengine: edma: Rename set_bits and remove unused clear_bits helper dmaengine: edma: Use correct type for of_find_property() third parameter dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC) ...

Merge tag 'rproc-v4.9' of git://github.com/andersson/remoteproc

2016-10-07T00:00:09Z

Pull remoteproc updates from Bjorn Andersson: "In addition to a slew of minor fixes and cleanups these patches refactor how we deal with remoteprocs that will be auto-booting themselves. That does clean up the remote resource handling but makes for additional work to clarify responsibilities and life cycles of resources. We also revise how module locking of remoteproc drivers work, so that they are locked as we hand out references to them to third parties, rather than only when booted by anyone. In addition to that we also introduce the Qualcomm Wireless Subsystem remoteproc driver" * tag 'rproc-v4.9' of git://github.com/andersson/remoteproc: (26 commits) remoteproc: Refactor rproc module locking remoteproc: Split driver and consumer dereferencing remoteproc: Correct resource handling upon boot failure remoteproc: Drop unnecessary NULL check remoteproc: core: transform struct fw_rsc_vdev_vring reserved field in pa remoteproc: Modify FW_RSC_ADDR_ANY definition remoteproc: qcom: wcnss: Fix return value check in wcnss_probe() remoteproc: qcom: Introduce WCNSS peripheral image loader dt-binding: remoteproc: Introduce Qualcomm WCNSS loader binding remoteproc: Only update table_ptr if we have a loaded table remoteproc: Move handling of cached table to boot/shutdown remoteproc: Move vdev handling to boot/shutdown remoteproc: Calculate max_notifyid during load remoteproc: Introduce auto-boot flag remoteproc/omap: revise a minor error trace message remoteproc/omap: fix various code formatting issues remoteproc: print hex numbers with a leading 0x format remoteproc: align code with open parenthesis remoteproc: fix bare unsigned type usage remoteproc: use variable names for sizeof() operator ...

Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2016-10-05T18:49:09Z

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...

Merge branch 'topic/compile_test' into for-linus

2016-10-03T03:46:03Z

Merge branch 'ib-move-htc-egpio' into devel

2016-09-28T16:30:21Z

mfd/gpio: Move HTC GPIO driver to GPIO subsystem

2016-09-28T16:28:34Z

The HTC GPIO driver is a pure GPIO driver and I just can not see what it is doing inside MFD. Let's just move it to GPIO and take this opportunity to move the platform data to Cc: arm@kernel.org Cc: Russell King Acked-by: Lee Jones Acked-by: Arnd Bergmann Signed-off-by: Linus Walleij

dmaengine: s3c24xx: Add dma_slave_map for s3c2440 devices

2016-09-26T17:43:04Z

This patch updates the s3c24xx dma driver to be able to pass a dma_slave_map array via the platform data. This is needed to be able to use the new, simpler dmaengine API [1]. I used the virtual DMA channels as a parameter for the dma_filter function. By doing that, I could reuse the existing filter function in drivers/dma/s3c24xx-dma.c. I have tested this on my mini2440 board with the audio driver. According to my observations, dma_request_slave_channel in the function dmaengine_pcm_new in the file sound/soc/soc-generic-dmaengine-pcm.c now returns a valid DMA channel whereas before no DMA channel was returned at that point. Entries for DMACH_XD0, DMACH_XD1 and DMACH_TIMER are missing because I don't realy know which driver to use for these. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/393635.html Signed-off-by: Sam Van Den Berge Reviewed-by: Sylwester Nawrocki Acked-by: Arnd Bergmann Acked-by: Krzysztof Kozlowski Signed-off-by: Vinod Koul

dmaengine: mmp_tdma: enable COMPILE_TEST

2016-09-26T17:01:04Z

To get more coverage, enable COMPILE_TEST for this driver. While at it, to fix build on other archs, select MMP_SRAM only for ARCH_MMP and also fix the platform header Suggested-by: Arnd Bergmann Acked-by: Zhangfei Gao Signed-off-by: Vinod Koul

gpio: lpc32xx: remove unused platform data file

2016-09-12T12:23:37Z

ARM LPC32xx platform is device-tree only, there is no need to keep a file with GPIO platform data structures, however some of macro definitions should be moved to the driver code, which is the only user of the removed header file. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Linus Walleij