user/sven/linux.git/include/linux/platform_data, branch v5.10.82

bus: ti-sysc: Add quirk handling for reinit on context lost

2021-11-26T09:39:08Z

[ Upstream commit 9d881361206ebcf6285c2ec2ef275aff80875347 ] Some interconnect target modules such as otg and gpmc on am335x need a re-init after resume. As we also have PM runtime cases where the context may be lost, let's handle these all with cpu_pm. For the am335x resume path, we already have cpu_pm_resume() call cpu_pm_cluster_exit(). Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Fix am335x resume hang for usb otg module

2021-06-10T11:39:21Z

[ Upstream commit 4d7b324e231366ea772ab10df46be31273ca39af ] On am335x, suspend and resume only works once, and the system hangs if suspend is attempted again. However, turns out suspend and resume works fine multiple times if the USB OTG driver for musb controller is loaded. The issue is caused my the interconnect target module losing context during suspend, and it needs a restore on resume to be reconfigure again as debugged earlier by Dave Gerlach . There are also other modules that need a restore on resume, like gpmc as noted by Dave. So let's add a common way to restore an interconnect target module based on a quirk flag. For now, let's enable the quirk for am335x otg only to fix the suspend and resume issue. As gpmc is not causing hangs based on tests with BeagleBone, let's patch gpmc separately. For gpmc, we also need a hardware reset done before restore according to Dave. To reinit the modules, we decouple system suspend from PM runtime. We replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume() with direct calls to internal functions and rely on the driver internal state. There no point trying to handle complex system suspend and resume quirks via PM runtime. This is issue should have already been noticed with commit 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb") when quirk handling was added for am335x otg for swsup. But the issue went unnoticed as having musb driver loaded hides the issue, and suspend and resume works once without the driver loaded. Fixes: 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb") Suggested-by: Dave Gerlach Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

gpio: omap: Save and restore sysconfig

2021-04-28T11:39:59Z

[ Upstream commit ddd8d94ca31e768c76cf8bfe34ba7b10136b3694 ] As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen Cc: Adam Ford Cc: Andreas Kemnade Cc: Grygorii Strashko Cc: Peter Ujfalusi Signed-off-by: Tony Lindgren Acked-by: Grygorii Strashko Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

bus: ti-sysc: Implement GPMC debug quirk to drop platform data

2021-03-11T13:17:23Z

[ Upstream commit cfeeea60af2f01c13b94d57a9bb1291e7bc181da ] We need to enable no-reset-on-init quirk for GPMC if the config option for CONFIG_OMAP_GPMC_DEBUG is set. Otherwise the GPMC driver code is unable to show the bootloader configured timings. Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

Merge tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

2020-11-27T12:18:40Z

Fixes for omaps for various issues noticed during the -rc cycle: - Earlier omap4 cpuidle fix was incomplete and needs to use a configured idle state instead - Fix am4 cpsw driver compatible to avoid invalid resource error for the legacy driver - Two kconfig fixes for genpd support that we added for for v5.10 for proper location of the option and adding missing option - Fix ti-sysc reset status checking on enabling modules to ignore quirky modules with reset status only usable when the quirk is activated during reset. Also fix bogus resetdone warning for cpsw and modules with no sysst register reset status bit - Suppress a ti-sysc warning for timers reserved as system timers - Fix the ordering of clocks for dra7 m_can * tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source ARM: dts: am437x-l4: fix compatible for cpsw switch dt node ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw bus: ti-sysc: Fix reset status check for modules with quirks ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com Signed-off-by: Arnd Bergmann

platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member

2020-10-29T22:22:59Z

There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva

platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member

2020-10-29T22:22:59Z

bus: ti-sysc: Fix reset status check for modules with quirks

2020-10-26T08:08:51Z

Commit d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") started showing a "OCP softreset timed out" warning on enable if the interconnect target module is not out of reset. This caused the warning to be often triggered for i2c and hdq while the devices are working properly. Turns out that some interconnect target modules seem to have an unusable reset status bits unless the module specific reset quirks are activated. Let's just skip the reset status check for those modules as we only want to activate the reset quirks when doing a reset, and not on enable. This way we don't see the bogus "OCP softreset timed out" warnings during boot. Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Signed-off-by: Tony Lindgren

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-10-24T17:33:08Z

Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...

Merge tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2020-10-17T17:45:42Z

Pull MTD updates from Richard Weinberger: "NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC HyperBus changes: - DMA support for TI's AM654 HyperBus controller driver. - HyperBus frontend driver for Renesas RPC-IF driver. SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi Add Alder Lake-S PCI ID MTD Core changes: - mtdoops: Don't run panic write twice - mtdconcat: Correctly handle panic write - Use DEFINE_SHOW_ATTRIBUTE" * tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits) mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled mtd: hyperbus: add Renesas RPC-IF driver Revert "mtd: spi-nor: Prefer asynchronous probe" mtd: parsers: bcm63xx: Do not make it modular mtd: spear_smi: Enable compile testing mtd: maps: vmu-flash: fix typos for struct memcard mtd: physmap: Add Baikal-T1 physically mapped ROM support mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu mtd: onenand: simplify the return expression of onenand_transfer_auto_oob mtd: rawnand: cadence: remove a redundant dev_err call mtd: rawnand: ams-delta: Fix non-OF build warning mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops() mtd: rawnand: Introduce nand_set_ecc_on_host_ops() mtd: rawnand: atmel: Check return values for nand_read_data_op mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size() mtd: rawnand: qcom: Simplify with dev_err_probe() mtd: rawnand: marvell: Fix and update kerneldoc mtd: rawnand: marvell: Simplify with dev_err_probe() mtd: rawnand: gpmi: Simplify with dev_err_probe() mtd: rawnand: atmel: Simplify with dev_err_probe() ...