user/sven/linux.git/include/linux/platform_data, branch v5.15.2

ARM: omap1: move omap15xx local bus handling to usb.c

2021-10-05T13:39:50Z

Commit 38225f2ef2f4 ("ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsets") removed a lot of mach/memory.h, but left the USB offset handling split into arch/arm/mach-omap1/usb.c and drivers/usb/host/ohci-omap.c. This can cause a randconfig build warning that now fails the build with -Werror: arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable] 561 | static struct notifier_block omap_1510_usb_ohci_nb = { | ^~~~~~~~~~~~~~~~~~~~~ Move it all into the platform file to get rid of the final location that relies on mach/memory.h. Acked-by: Felipe Balbi Acked-by: Alan Stern Acked-by: Tony Lindgren Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20210927144118.2464881-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann

Merge tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2021-09-09T18:07:47Z

Pull dmaengine updates from Vinod Koul: "New drivers/devices - Support for Renesas RZ/G2L dma controller - New driver for AMD PTDMA controller Updates: - Big pile of idxd updates - Updates for Altera driver, stm32-dma, dw etc" * tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (83 commits) dmaengine: sh: fix some NULL dereferences dmaengine: sh: Fix unused initialization of pointer lmdesc MAINTAINERS: Fix AMD PTDMA DRIVER entry dmaengine: ptdma: remove PT_OFFSET to avoid redefnition dmaengine: ptdma: Add debugfs entries for PTDMA dmaengine: ptdma: register PTDMA controller as a DMA resource dmaengine: ptdma: Initial driver for the AMD PTDMA dmaengine: fsl-dpaa2-qdma: Fix spelling mistake "faile" -> "failed" dmaengine: idxd: remove interrupt disable for dev_lock dmaengine: idxd: remove interrupt disable for cmd_lock dmaengine: idxd: fix setting up priv mode for dwq dmaengine: xilinx_dma: Set DMA mask for coherent APIs dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX dmaengine: sh: Add DMAC driver for RZ/G2L SoC dmaengine: Extend the dma_slave_width for 128 bytes dt-bindings: dma: Document RZ/G2L bindings dmaengine: ioat: depends on !UML dmaengine: idxd: set descriptor allocation size to threshold for swq dmaengine: idxd: make submit failure path consistent on desc freeing dmaengine: idxd: remove interrupt flag for completion list spinlock ...

Merge tag 'gpio-updates-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2021-09-07T19:27:27Z

Pull gpio updates from Bartosz Golaszewski: "We mostly have various improvements and refactoring all over the place but also some interesting new features - like the virtio GPIO driver that allows guest VMs to use host's GPIOs. We also have a new/old GPIO driver for rockchip - this one has been split out of the pinctrl driver. Summary: - new driver: gpio-virtio allowing a guest VM running linux to access GPIO lines provided by the host - split the GPIO driver out of the rockchip pin control driver - add support for a new model to gpio-aspeed-sgpio, refactor the driver and use generic device property interfaces, improve property sanitization - add ACPI support to gpio-tegra186 - improve the code setting the line names to support multiple GPIO banks per device - constify a bunch of OF functions in the core GPIO code and make the declaration for one of the core OF functions we use consistent within its header - use software nodes in intel_quark_i2c_gpio - add support for the gpio-line-names property in gpio-mt7621 - use the standard GPIO function for setting the GPIO names in gpio-brcmstb - fix a bunch of leaks and other bugs in gpio-mpc8xxx - use generic pm callbacks in gpio-ml-ioh - improve resource management and PM handling in gpio-mlxbf2 - modernize and improve the gpio-dwapb driver - coding style improvements in gpio-rcar - documentation fixes and improvements - update the MAINTAINERS entry for gpio-zynq - minor tweaks in several drivers" * tag 'gpio-updates-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (35 commits) gpio: mpc8xxx: Use 'devm_gpiochip_add_data()' to simplify the code and avoid a leak gpio: mpc8xxx: Fix a potential double iounmap call in 'mpc8xxx_probe()' gpio: mpc8xxx: Fix a resources leak in the error handling path of 'mpc8xxx_probe()' gpio: viperboard: remove platform_set_drvdata() call in probe gpio: virtio: Add missing mailings lists in MAINTAINERS entry gpio: virtio: Fix sparse warnings gpio: remove the obsolete MX35 3DS BOARD MC9S08DZ60 GPIO functions gpio: max730x: Use the right include gpio: Add virtio-gpio driver gpio: mlxbf2: Use DEFINE_RES_MEM_NAMED() helper macro gpio: mlxbf2: Use devm_platform_ioremap_resource() gpio: mlxbf2: Drop wrong use of ACPI_PTR() gpio: mlxbf2: Convert to device PM ops gpio: dwapb: Get rid of legacy platform data mfd: intel_quark_i2c_gpio: Convert GPIO to use software nodes gpio: dwapb: Read GPIO base from gpio-base property gpio: dwapb: Unify ACPI enumeration checks in get_irq() and configure_irqs() gpiolib: Deduplicate forward declaration in the consumer.h header MAINTAINERS: update gpio-zynq.yaml reference gpio: tegra186: Add ACPI support ...

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2021-09-02T21:17:24Z

Pull clk updates from Stephen Boyd: "Nothing changed in the clk framework core this time around. We did get some updates to the basic clk types to use determine_rate for the divider type and add a power of two fractional divider flag though. Otherwise, this is a collection of clk driver updates. More than half the diffstat is in the Qualcomm clk driver where we add a bunch of data to describe clks on various SoCs and fix bugs. The other big new thing in here is the Mediatek MT8192 clk driver. That's been under review for a while and it's nice to see that it's finally upstream. Beyond that it's the usual set of minor fixes and tweaks to clk drivers. There are some non-clk driver bits in here which have all been acked by the respective maintainers. New Drivers: - Support video, gpu, display clks on qcom sc7280 SoCs - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs - Multimedia clks (MMCC) on qcom MSM8994/MSM8992 - RPMh clks on qcom SM6350 SoCs - Support for Mediatek MT8192 SoCs - Add display (DU and DSI) clocks on Renesas R-Car V3U - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and resets on Renesas RZ/G2L Updates: - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators - Add power of two flag to fractional divider clk type - Migrate some clk drivers to clk_divider_ops.determine_rate - Migrate to clk_parent_data in gcc-sdm660 - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2 - Switch from .round_rate to .determine_rate in clk-divider-gate - Fix clock tree update for TF-A controlled clocks for all i.MX8M - Add missing M7 core clock for i.MX8MN - YAML conversion of rk3399 clock controller binding - Removal of GRF dependency for the rk3328/rk3036 pll types - Drop CLK_IS_CRITICAL flag from Tegra fuse clk - Make CLK_R9A06G032 Kconfig symbol invisible - Convert various DT bindings to YAML" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits) dt-bindings: clock: samsung: fix header path in example clk: tegra: fix old-style declaration clk: qcom: Add SM6350 GCC driver MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: clk-generated: Limit the requested rate to our range clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type ...

Merge tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

2021-09-02T20:49:39Z

Pull x86 platform driver updates from Hans de Goede: "Highlights: - Move all the Intel drivers into their own subdir(s) (mostly Kate's work) - New meraki-mx100 platform driver - Asus WMI driver enhancements, including support for /sys/firmware/acpi/platform_profile - New BIOS SAR driver for Intel M.2 WWAM modems - Alder Lake support for the Intel PMC driver - A whole bunch of cleanups + fixes all over the place" * tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning platform/x86: ISST: use semi-colons instead of commas platform/x86: asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning platform/x86: asus-wmi: Delete impossible condition platform/x86: hp_accel: Convert to be a platform driver platform/x86: hp_accel: Remove _INI method call platform/mellanox: mlxbf-pmc: fix kernel-doc notation platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver platform/x86: intel-wmi-thunderbolt: Move to intel sub-directory platform/x86: intel-wmi-sbl-fw-update: Move to intel sub-directory platform/x86: intel-vbtn: Move to intel sub-directory platform/x86: intel_oaktrail: Move to intel sub-directory platform/x86: intel_int0002_vgpio: Move to intel sub-directory platform/x86: intel-hid: Move to intel sub-directory platform/x86: intel_atomisp2: Move to intel sub-directory platform/x86: intel_speed_select_if: Move to intel sub-directory ...

Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-09-01T22:25:28Z

Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...

Merge tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2021-09-01T17:29:29Z

Pull sound updates from Takashi Iwai: "There are a few intensive changes in ALSA core side at this time that helped with significant code reduction. Meanwhile we keep getting new stuff, so the total size still grows... Anyway, the below are some highlights in this development cycle. ALSA core: - New helpers to manage page allocations and card object with devres - Refactoring for memory allocation with wc-pages - A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for controlling the explicit sync of the stream control; it'll be used for ASoC SOF and non-coherent memory in future ASoC: - Lots of cleanups and improvements to the Intel drivers, including some new systems support - New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L, Rockchip RK3568 S/PDIF USB-audio: - Re-organized the quirk handling and a new option quirk_flags - Fix for a regression in 5.14 code change for JACK - Quirks for Sony WALKMAN, Digidesign mbox HD-audio: - Enhanced support for CS8409 codec - More consistent shutdown behavior with the runtime PM - The model option can accept the PCI or codec SSID as an alias - Quirks for ASUS ROG, HP Spectre x360 Others: - Lots of code reduction in legacy drivers with devres helpers - FireWire MOTU 896HD support" * tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (421 commits) ASoC: Revert PCM trigger changes ALSA: usb-audio: Add lowlatency module option ALSA: hda/cs8409: Initialize Codec only in init fixup. ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary ALSA: usb-audio: Work around for XRUN with low latency playback ALSA: pcm: fix divide error in snd_pcm_lib_ioctl ASoC: soc-pcm: test refcount before triggering ASoC: soc-pcm: protect BE dailink state changes in trigger ASoC: wcd9335: Disable irq on slave ports in the remove function ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function ASoC: wcd9335: Fix a double irq free in the remove function ALSA: hda: Disable runtime resume at shutdown ASoC: rockchip: i2s: Add support for frame inversion ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs ASoC: rockchip: i2s: Add compatible for more SoCs ASoC: rockchip: i2s: Make playback/capture optional ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B ASoC: dt-bindings: rockchip: Document reset property for i2s ASoC: rockchip: i2s: Fix regmap_ops hang ASoC: rockchip: i2s: Improve dma data transfer efficiency ...

Merge tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2021-08-31T21:31:10Z

Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Return a proper response in case of an ioctl error - Issue HPI to interrupt BKOPS for eMMC if it timed out - Avoid hogging the CPU while polling for busy - Extend sd8787 pwrseq to support the wilc1000 SDIO - Remove a couple of confusing warning messages - Clarify comment for ->card_busy() host ops MMC host: - dw_mmc: Add data CRC error injection - mmci: De-assert reset during ->probe() - rtsx_pci: Fix long reads when clock is pre-scaled - sdhci: Correct the tuning command handle for PIO mode - sdhci-esdhc-imx: Improve support for auto tuning - sdhci-msm: Add support for the sc7280 - sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP - sdhci-of-arasan: Enable support for auto cmd12 - sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter - usdhi6rol0: Implement the ->card_busy() host ops MEMSTICK: - A couple of minor cleanups" * tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: queue: Remove unused parameters(request_queue) mmc: pwrseq: sd8787: fix compilation warning mmc: core: Return correct emmc response in case of ioctl error mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning mmc: core: Issue HPI in case the BKOPS timed out mmc: queue: Match the data type of max_segments mmc: switch from 'pci_' to 'dma_' API memstick: switch from 'pci_' to 'dma_' API memstick: r592: Change the name of the 'pci_driver' structure to be consistent mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787 mmc: pwrseq: sd8787: add support for wilc1000 dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000 dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning mmc: core: Update ->card_busy() callback comment mmc: usdhi6rol0: Implement card_busy function mmc: sdhci: Correct the tuning command handle for PIO mode ...

Merge tag 'for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2021-08-30T18:47:32Z

Pull power supply and reset updates from Sebastian Reichel: "Battery/charger related: - cros-peripheral-charger: new driver - mt6360-charger: new driver - simple-battery: support reading chemistry info - max17042-battery: add max77849 support - sbs-battery: add time_to_empty_now support - smb347-charger: prepare USB OTG support - rn5t618: add voltage_now support - axp288: cleanup & optimizations - max17042_battery: cleanups - ab8500: cleanups - misc minor cleanups and DT binding fixes reset related: - tps65086-restart: new driver - linkstation-poweroff: support NETGEAR ReadyNAS Duo v2" * tag 'for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits) power: supply: core: Fix parsing of battery chemistry/technology power: supply: max17042_battery: log SOC threshold using debug log level power: supply: max17042_battery: more robust chip type checks power: supply: max17042_battery: fix typo in MAx17042_TOFF power: supply: max17042_battery: clean up MAX17055_V_empty power: supply: smb347-charger: Implement USB VBUS regulator power: supply: smb347-charger: Add missing pin control activation power: supply: smb347-charger: Utilize generic regmap caching power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator power: reset: Add TPS65086 restart driver dt-bindings: power: supply: max17042: describe interrupt power: supply: max17042: remove duplicated STATUS bit defines power: supply: max17042: handle fails of reading status register power: supply: core: Parse battery chemistry/technology dt-bindings: power: Extend battery bindings with chemistry power: reset: linkstation-poweroff: add new device power: reset: linkstation-poweroff: prepare for new devices power: supply: bq24735: reorganize ChargeOption command macros power: supply: rn5t618: Add voltage_now property ...

mmc: sdhci-esdhc-imx: Remove unneeded mmc-esdhc-imx.h header

2021-08-24T08:15:32Z

After the i.MX conversion to a DT-only platform, the mmc-esdhc-imx.h header file is no longer used outside the driver, so move its content to the sdhci-esdhc-imx driver and remove the header. Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20210719193413.3792615-1-festevam@gmail.com Signed-off-by: Ulf Hansson