user/sven/linux.git/include/linux/platform_data, branch v5.4.249

platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask

2022-09-15T10:04:50Z

[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ] On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI specification (see Table 4.13 "PM1 Control Registers Fixed Hardware Feature Control Bits" for the details). Fix the mask and other related definitions accordingly. Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin

gpio: omap: Save and restore sysconfig

2021-04-28T11:19:14Z

[ Upstream commit ddd8d94ca31e768c76cf8bfe34ba7b10136b3694 ] As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen Cc: Adam Ford Cc: Andreas Kemnade Cc: Grygorii Strashko Cc: Peter Ujfalusi Signed-off-by: Tony Lindgren Acked-by: Grygorii Strashko Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

dmaengine: dw: Add DMA-channels mask cell support

2020-10-29T08:58:09Z

[ Upstream commit e8ee6c8cb61b676f1a2d6b942329e98224bd8ee9 ] DW DMA IP-core provides a way to synthesize the DMA controller with channels having different parameters like maximum burst-length, multi-block support, maximum data width, etc. Those parameters both explicitly and implicitly affect the channels performance. Since DMA slave devices might be very demanding to the DMA performance, let's provide a functionality for the slaves to be assigned with DW DMA channels, which performance according to the platform engineer fulfill their requirements. After this patch is applied it can be done by passing the mask of suitable DMA-channels either directly in the dw_dma_slave structure instance or as a fifth cell of the DMA DT-property. If mask is zero or not provided, then there is no limitation on the channels allocation. For instance Baikal-T1 SoC is equipped with a DW DMAC engine, which first two channels are synthesized with max burst length of 16, while the rest of the channels have been created with max-burst-len=4. It would seem that the first two channels must be faster than the others and should be more preferable for the time-critical DMA slave devices. In practice it turned out that the situation is quite the opposite. The channels with max-burst-len=4 demonstrated a better performance than the channels with max-burst-len=16 even when they both had been initialized with the same settings. The performance drop of the first two DMA-channels made them unsuitable for the DW APB SSI slave device. No matter what settings they are configured with, full-duplex SPI transfers occasionally experience the Rx FIFO overflow. It means that the DMA-engine doesn't keep up with incoming data pace even though the SPI-bus is enabled with speed of 25MHz while the DW DMA controller is clocked with 50MHz signal. There is no such problem has been noticed for the channels synthesized with max-burst-len=4. Signed-off-by: Serge Semin Link: https://lore.kernel.org/r/20200731200826.9292-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

bus: ti-sysc: Handle module unlock quirk needed for some RTC

2020-07-22T07:32:58Z

[ Upstream commit e8639e1c986a8a9d0f94549170f6db579376c3ae ] The RTC modules on am3 and am4 need quirk handling to unlock and lock them for reset so let's add the quirk handling based on what we already have for legacy platform data. In later patches we will simply drop the RTC related platform data and the old quirk handling. Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO

2020-02-24T07:36:35Z

[ Upstream commit 94f6345712b37e4bb23cb265ce4c65b9d177e75a ] For dra7 dcan and dwc3 instances we need to block clockdomain autoidle. Let's do this with CLKDM_NOAUTO quirk flag and enable it for dcan and dwc3. Cc: Keerthy Cc: Roger Quadros Cc: Tero Kristo Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Fix missing force mstandby quirk handling

2020-02-01T09:34:51Z

[ Upstream commit 93c60483b5feefced92b869d5f97769495bc6313 ] Commit 03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for musb") added quirk handling for mstandby quirk but did not consider that we also need a quirk variant for SYSC_QUIRK_FORCE_MSTANDBY. We need to use forced idle mode for both SYSC_QUIRK_SWSUP_MSTANDBY and SYSC_QUIRK_FORCE_MSTANDBY, but SYSC_QUIRK_SWSUP_MSTANDBY also need to additionally also configure no-idle mode when enabled. Fixes: 03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for musb") Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

bus: ti-sysc: Add module enable quirk for audio AESS

2020-02-01T09:34:50Z

[ Upstream commit 020003f763e24e4ed0bb3d8909f3940891536d5d ] We must set the autogating bit on enable for AESS (Audio Engine SubSystem) when probed with ti-sysc interconnect target module driver. Otherwise it won't idle properly. Cc: Peter Ujfalusi Tested-by: Peter Ujfalusi Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

dmaengine: imx-sdma: fix size check for sdma script_number

2019-10-14T08:03:44Z

Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (41) exceed the size of structure sdma_script_start_addrs(40), thus cause memory corrupt such as slob block header so that kernel trap into while() loop forever in slob_free(). Please refer to below code piece in imx-sdma.c: for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; /* memory corrupt here */ That issue was brought by commit a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (38->41 3 scripts added) not align with script number added in sdma_script_start_addrs(2 scripts). Fixes: a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") Cc: stable@vger.kernel Link: https://www.spinics.net/lists/arm-kernel/msg754895.html Signed-off-by: Robin Gong Reported-by: Jurgen Lambrecht Link: https://lore.kernel.org/r/1569347584-3478-1-git-send-email-yibin.gong@nxp.com [vkoul: update the patch title] Signed-off-by: Vinod Koul

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

2019-09-29T17:24:23Z

Pull thermal SoC updates from Eduardo Valentin: "This is a really small pull in the midst of a lot of pending patches. We are in the middle of restructuring how we are maintaining the thermal subsystem, as per discussion in our last LPC. For now, I am sending just some changes that were pending in my tree. Looking forward to get a more streamlined process in the next merge window" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: db8500: Rewrite to be a pure OF sensor thermal: db8500: Use dev helper variable thermal: db8500: Finalize device tree conversion thermal: thermal_mmio: remove some dead code

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-09-29T00:47:33Z

Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...