user/sven/linux.git/include/linux/platform_device.h, branch v5.16.19

driver core: platform: Remove platform_device_add_properties()

2021-08-18T14:08:11Z

There are no more users for it. The last place where it's called is in platform_device_register_full(). Replacing that call with device_create_managed_software_node() and removing the function. Reviewed-by: Andy Shevchenko Reviewed-by: Thierry Reding Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20210817102449.39994-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

driver core: Drop helper devm_platform_ioremap_resource_wc()

2021-05-27T13:51:33Z

Since the macro was introduced in 2019 (commit bb6243b4f73d ("drivers: platform: provide devm_platform_ioremap_resource_wc()") there is only a single user which hardly justifies the function for the small task it provides. So drop the helper and open-code it in the only user. Adapt the non-wc case accordingly. For a all-mod-config build on amd64 this change introduces the following changes according to bloat-o-meter: add/remove: 0/1 grow/shrink: 1/0 up/down: 20/-252 (-232) Function old new delta devm_platform_ioremap_resource_wc 252 - -252 sram_probe 796 816 +20 Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20210525103711.956438-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

driver core: platform: Declare early_platform_cleanup() prototype

2021-04-02T15:02:31Z

Compiler is not happy: CC drivers/base/platform.o drivers/base/platform.c:1557:20: warning: no previous prototype for ‘early_platform_cleanup’ [-Wmissing-prototypes] 1557 | void __weak __init early_platform_cleanup(void) { } | ^~~~~~~~~~~~~~~~~~~~~~ Declare early_platform_cleanup() prototype in the header to make everyone happy. Fixes: eecd37e105f0 ("drivers: Fix boot problem on SuperH") Cc: Guenter Roeck Reviewed-by: Guenter Roeck Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210331150525.59223-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-12-15T23:03:31Z

Pull irq updates from Thomas Gleixner: "Generic interrupt and irqchips subsystem updates. Unusually, there is not a single completely new irq chip driver, just new DT bindings and extensions of existing drivers to accomodate new variants! Core: - Consolidation and robustness changes for irq time accounting - Cleanup and consolidation of irq stats - Remove the fasteoi IPI flow which has been proved useless - Provide an interface for converting legacy interrupt mechanism into irqdomains Drivers: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups" * tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling driver core: platform: Add devm_platform_get_irqs_affinity() ACPI: Drop acpi_dev_irqresource_disabled() resource: Add irqresource_disabled() genirq/affinity: Add irq_update_affinity_desc() irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device platform-msi: Track shared domain allocation irqchip/ti-sci-intr: Fix freeing of irqs irqchip/ti-sci-inta: Fix printing of inta id on probe success drivers/irqchip: Remove EZChip NPS interrupt controller Revert "genirq: Add fasteoi IPI flow" irqchip/hip04: Make IPIs use handle_percpu_devid_irq() irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq() irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq() irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq() irqchip/ocelot: Add support for Jaguar2 platforms irqchip/ocelot: Add support for Serval platforms irqchip/ocelot: Add support for Luton platforms irqchip/ocelot: prepare to support more SoC ...

driver core: platform: Add devm_platform_get_irqs_affinity()

2020-12-11T14:47:51Z

Drivers for multi-queue platform devices may also want managed interrupts for handling HW queue completion interrupts, so add support. The function accepts an affinity descriptor pointer, which covers all IRQs expected for the device. The function is devm class as the only current in-tree user will also use devm method for requesting the interrupts; as such, the function is made as devm as it can ensure ordering of freeing the irq and disposing of the mapping. Signed-off-by: John Garry Signed-off-by: Marc Zyngier Acked-by: Marc Zyngier Link: https://lore.kernel.org/r/1606905417-183214-5-git-send-email-john.garry@huawei.com

driver core: platform: Introduce platform_get_mem_or_io()

2020-12-10T15:31:46Z

There are at least few existing users of the proposed API which retrieves either MEM or IO resource from platform device. Make it common to utilize in the existing and new users. Cc: Eric Auger Cc: Alex Williamson Cc: kvm@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: Peng Hao Cc: Arnd Bergmann Reviewed-by: Cornelia Huck Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20201209203642.27648-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

driver core: platform: Initialize dma_parms for platform devices

2020-04-28T15:44:33Z

It's currently the platform driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common platform bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Suggested-by: Christoph Hellwig Cc: Tested-by: Haibo Chen Reviewed-by: Arnd Bergmann Signed-off-by: Ulf Hansson Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20200422100954.31211-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2020-03-30T20:59:52Z

Pull driver core updates from Greg KH: "Here is the "big" set of driver core changes for 5.7-rc1. Nothing huge in here, just lots of little firmware core changes and use of new apis, a libfs fix, a debugfs api change, and some driver core deferred probe rework. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits) Revert "driver core: Set fw_devlink to "permissive" behavior by default" driver core: Set fw_devlink to "permissive" behavior by default driver core: Replace open-coded list_last_entry() driver core: Read atomic counter once in driver_probe_done() libfs: fix infoleak in simple_attr_read() driver core: Add device links from fwnode only for the primary device platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet platform/x86: touchscreen_dmi: Add EFI embedded firmware info support Input: icn8505 - Switch to firmware_request_platform for retreiving the fw Input: silead - Switch to firmware_request_platform for retreiving the fw selftests: firmware: Add firmware_request_platform tests test_firmware: add support for firmware_request_platform firmware: Add new platform fallback mechanism and firmware_request_platform() Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking" drivers: base: power: wakeup.c: Use built-in RCU list checking component: allow missing unbind callback debugfs: remove return value of debugfs_create_file_size() debugfs: Check module state before warning in {full/open}_proxy_open() firmware: fix a double abort case with fw_load_sysfs_fallback arch_topology: Fix putting invalid cpu clk ...

drivers: provide devm_platform_get_and_ioremap_resource()

2020-03-24T11:09:38Z

Since commit "drivers: provide devm_platform_ioremap_resource()", it was wrap platform_get_resource() and devm_ioremap_resource() as single helper devm_platform_ioremap_resource(). but now, many drivers still used platform_get_resource() and devm_ioremap_resource() together in the kernel tree. The reason can not be replaced is they still need use the resource variables obtained by platform_get_resource(). so provide this helper. Suggested-by: Geert Uytterhoeven Suggested-by: Sergei Shtylyov Reviewed-by: Geert Uytterhoeven Signed-off-by: Dejin Zheng Link: https://lore.kernel.org/r/20200323160612.17277-2-zhengdejin5@gmail.com Signed-off-by: Greg Kroah-Hartman

driver code: clarify and fix platform device DMA mask allocation

2020-03-11T16:30:27Z

This does three inter-related things to clarify the usage of the platform device dma_mask field. In the process, fix the bug introduced by cdfee5623290 ("driver core: initialize a default DMA mask for platform device") that caused Artem Tashkinov's laptop to not boot with newer Fedora kernels. This does: - First off, rename the field to "platform_dma_mask" to make it greppable. We have way too many different random fields called "dma_mask" in various data structures, where some of them are actual masks, and some of them are just pointers to the mask. And the structures all have pointers to each other, or embed each other inside themselves, and "pdev" sometimes means "platform device" and sometimes it means "PCI device". So to make it clear in the code when you actually use this new field, give it a unique name (it really should be something even more unique like "platform_device_dma_mask", since it's per platform device, not per platform, but that gets old really fast, and this is unique enough in context). To further clarify when the field gets used, initialize it when we actually start using it with the default value. - Then, use this field instead of the random one-off allocation in platform_device_register_full() that is now unnecessary since we now already have a perfectly fine allocation for it in the platform device structure. - The above then allows us to fix the actual bug, where the error path of platform_device_register_full() would unconditionally free the platform device DMA allocation with 'kfree()'. That kfree() was dont regardless of whether the allocation had been done earlier with the (now removed) kmalloc, or whether setup_pdev_dma_masks() had already been used and the dma_mask pointer pointed to the mask that was part of the platform device. It seems most people never triggered the error path, or only triggered it from a call chain that set an explicit pdevinfo->dma_mask value (and thus caused the unnecessary allocation that was "cleaned up" in the error path) before calling platform_device_register_full(). Robin Murphy points out that in Artem's case the wdat_wdt driver failed in platform_device_add(), and that was the one that had called platform_device_register_full() with pdevinfo.dma_mask = 0, and would have caused that kfree() of pdev.dma_mask corrupting the heap. A later unrelated kmalloc() then oopsed due to the heap corruption. Fixes: cdfee5623290 ("driver core: initialize a default DMA mask for platform device") Reported-bisected-and-tested-by: Artem S. Tashkinov Reviewed-by: Robin Murphy Cc: Greg Kroah-Hartman Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds