user/sven/linux.git/include/linux/pm.h, branch v3.3.5

Merge branch 'pm-runtime' into pm-for-linus

2011-12-25T22:43:05Z

* pm-runtime: PM / Runtime: Use device PM QoS constraints (v2)

PM: Drop generic_subsys_pm_ops

2011-12-21T21:03:32Z

Since the PM core is now going to execute driver callbacks directly if the corresponding subsystem callbacks are not present, forward-only subsystem callbacks (i.e. such that only execute the corresponding driver callbacks) are not necessary any more. Thus it is possible to remove generic_subsys_pm_ops, because the only callback in there that is not forward-only, .runtime_idle, is not really used by the only user of generic_subsys_pm_ops, which is vio_bus_type. However, the generic callback routines themselves cannot be removed from generic_ops.c, because they are used individually by a number of subsystems. Signed-off-by: Rafael J. Wysocki

PM / Runtime: Use device PM QoS constraints (v2)

2011-12-01T20:46:42Z

Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki

PM: Update comments describing device power management callbacks

2011-11-28T21:14:55Z

The comments describing device power management callbacks in include/pm.h are outdated and somewhat confusing, so make them reflect the reality more accurately. Signed-off-by: Rafael J. Wysocki

PM Sleep: Do not extend wakeup paths to devices with ignore_children set

2011-11-17T20:39:33Z

Commit 4ca46ff3e0d8c234cb40ebb6457653b59584426c (PM / Sleep: Mark devices involved in wakeup signaling during suspend) introduced the power.wakeup_path field in struct dev_pm_info to mark devices whose children are enabled to wake up the system from sleep states, so that power domains containing the parents that provide their children with wakeup power and/or relay their wakeup signals are not turned off. Unfortunately, that introduced a PM regression on SH7372 whose power consumption in the system "memory sleep" state increased as a result of it, because it prevented the power domain containing the I2C controller from being turned off when some children of that controller were enabled to wake up the system, although the controller was not necessary for them to signal wakeup. To fix this issue use the observation that devices whose power.ignore_children flag is set for runtime PM should be treated analogously during system suspend. Namely, they shouldn't be included in wakeup paths going through their children. Since the SH7372 I2C controller's power.ignore_children flag is set, doing so will restore the previous behavior of that SOC. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman

Merge branch 'pm-domains' into pm-for-linus

2011-10-21T22:21:52Z

* pm-domains: ARM: mach-shmobile: sh7372 A4R support (v4) ARM: mach-shmobile: sh7372 A3SP support (v4) PM / Sleep: Mark devices involved in wakeup signaling during suspend

PM / Sleep: Mark devices involved in wakeup signaling during suspend

2011-10-21T22:19:29Z

The generic PM domains code in drivers/base/power/domain.c has to avoid powering off domains that provide power to wakeup devices during system suspend. Currently, however, this only works for wakeup devices directly belonging to the given domain and not for their children (or the children of their children and so on). Thus, if there's a wakeup device whose parent belongs to a power domain handled by the generic PM domains code, the domain will be powered off during system suspend preventing the device from signaling wakeup. To address this problem introduce a device flag, power.wakeup_path, that will be set during system suspend for all wakeup devices, their parents, the parents of their parents and so on. This way, all wakeup paths in the device hierarchy will be marked and the generic PM domains code will only need to avoid powering off domains containing devices whose power.wakeup_path is set. Signed-off-by: Rafael J. Wysocki

Merge branch 'pm-qos' into pm-for-linus

2011-10-07T21:17:07Z

* pm-qos: PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworks PM / QoS: Add function dev_pm_qos_read_value() (v3) PM QoS: Add global notification mechanism for device constraints PM QoS: Implement per-device PM QoS constraints PM QoS: Generalize and export constraints management code PM QoS: Reorganize data structs PM QoS: Code reorganization PM QoS: Minor clean-ups PM QoS: Move and rename the implementation files

Merge branch 'pm-domains' into pm-for-linus

2011-10-07T21:17:02Z

* pm-domains: PM / Domains: Split device PM domain data into base and need_restore ARM: mach-shmobile: sh7372 sleep warning fixes ARM: mach-shmobile: sh7372 A3SM support ARM: mach-shmobile: sh7372 generic suspend/resume support PM / Domains: Preliminary support for devices with power.irq_safe set PM: Move clock-related definitions and headers to separate file PM / Domains: Use power.sybsys_data to reduce overhead PM: Reference counting of power.subsys_data PM: Introduce struct pm_subsys_data ARM / shmobile: Make A3RV be a subdomain of A4LC on SH7372 PM / Domains: Rename argument of pm_genpd_add_subdomain() PM / Domains: Rename GPD_STATE_WAIT_PARENT to GPD_STATE_WAIT_MASTER PM / Domains: Allow generic PM domains to have multiple masters PM / Domains: Add "wait for parent" status for generic PM domains PM / Domains: Make pm_genpd_poweron() always survive parent removal PM / Domains: Do not take parent locks to modify subdomain counters PM / Domains: Implement subdomain counters as atomic fields

PM / QoS: Add function dev_pm_qos_read_value() (v3)

2011-10-04T19:54:26Z

To read the current PM QoS value for a given device we need to make sure that the device's power.constraints object won't be removed while we're doing that. For this reason, put the operation under dev->power.lock and acquire the lock around the initialization and removal of power.constraints. Moreover, since we're using the value of power.constraints to determine whether or not the object is present, the power.constraints_state field isn't necessary any more and may be removed. However, dev_pm_qos_add_request() needs to check if the device is being removed from the system before allocating a new PM QoS constraints object for it, so make it use the power.power_state field of struct device for this purpose. Signed-off-by: Rafael J. Wysocki