user/sven/linux.git/include/linux/pm.h, branch v4.15.11

PM / sleep: Avoid excess pm_runtime_enable() calls in device_resume()

2017-12-11T13:32:56Z

Middle-layer code doing suspend-time optimizations for devices with the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and the ACPI PM domain) needs to make the core skip ->thaw_early and ->thaw callbacks for those devices in some cases and it sets the power.direct_complete flag for them for this purpose. However, it turns out that setting power.direct_complete outside of the PM core is a bad idea as it triggers an excess invocation of pm_runtime_enable() in device_resume(). For this reason, provide a helper to clear power.is_late_suspended and power.is_suspended to be invoked by the middle-layer code in question instead of setting power.direct_complete and make that code call the new helper. Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account) Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account) Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Acked-by: Bjorn Helgaas

PCI / PM: Take SMART_SUSPEND driver flag into account

2017-11-06T12:57:46Z

Make the PCI bus type take DPM_FLAG_SMART_SUSPEND into account in its system-wide PM callbacks and make sure that all code that should not run in parallel with pci_pm_runtime_resume() is executed in the "late" phases of system suspend, freeze and poweroff transitions. [Note that the pm_runtime_suspended() check in pci_dev_keep_suspended() is an optimization, because if is not passed, all of the subsequent checks may be skipped and some of them are much more overhead in general.] Also use the observation that if the device is in runtime suspend at the beginning of the "late" phase of a system-wide suspend-like transition, its state cannot change going forward (runtime PM is disabled for it at that time) until the transition is over and the subsequent system-wide PM callbacks should be skipped for it (as they generally assume the device to not be suspended), so add checks for that in pci_pm_suspend_late/noirq(), pci_pm_freeze_late/noirq() and pci_pm_poweroff_late/noirq(). Moreover, if pci_pm_resume_noirq() or pci_pm_restore_noirq() is called during the subsequent system-wide resume transition and if the device was left in runtime suspend previously, its runtime PM status needs to be changed to "active" as it is going to be put into the full-power state, so add checks for that too to these functions. In turn, if pci_pm_thaw_noirq() runs after the device has been left in runtime suspend, the subsequent "thaw" callbacks need to be skipped for it (as they may not work correctly with a suspended device), so set the power.direct_complete flag for the device then to make the PM core skip those callbacks. In addition to the above add a core helper for checking if DPM_FLAG_SMART_SUSPEND is set and the device runtime PM status is "suspended" at the same time, which is done quite often in the new code (and will be done elsewhere going forward too). Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Acked-by: Bjorn Helgaas

PM / core: Add SMART_SUSPEND driver flag

2017-11-06T12:57:01Z

Define and document a SMART_SUSPEND flag to instruct bus types and PM domains that the system suspend callbacks provided by the driver can cope with runtime-suspended devices, so from the driver's perspective it should be safe to leave devices in runtime suspend during system suspend. Setting that flag may also cause middle-layer code (bus types, PM domains etc.) to skip invocations of the ->suspend_late and ->suspend_noirq callbacks provided by the driver if the device is in runtime suspend at the beginning of the "late" phase of the system-wide suspend transition, in which case the driver's system-wide resume callbacks may be invoked back-to-back with its ->runtime_suspend callback, so the driver has to be able to cope with that too. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Reviewed-by: Ulf Hansson

PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags

2017-11-06T12:55:30Z

The motivation for this change is to provide a way to work around a problem with the direct-complete mechanism used for avoiding system suspend/resume handling for devices in runtime suspend. The problem is that some middle layer code (the PCI bus type and the ACPI PM domain in particular) returns positive values from its system suspend ->prepare callbacks regardless of whether the driver's ->prepare returns a positive value or 0, which effectively prevents drivers from being able to control the direct-complete feature. Some drivers need that control, however, and the PCI bus type has grown its own flag to deal with this issue, but since it is not limited to PCI, it is better to address it by adding driver flags at the core level. To that end, add a driver_flags field to struct dev_pm_info for flags that can be set by device drivers at the probe time to inform the PM core and/or bus types, PM domains and so on on the capabilities and/or preferences of device drivers. Also add two static inline helpers for setting that field and testing it against a given set of flags and make the driver core clear it automatically on driver remove and probe failures. Define and document two PM driver flags related to the direct- complete feature: NEVER_SKIP and SMART_PREPARE that can be used, respectively, to indicate to the PM core that the direct-complete mechanism should never be used for the device and to inform the middle layer code (bus types, PM domains etc) that it can only request the PM core to use the direct-complete mechanism for the device (by returning a positive value from its ->prepare callback) if it also has been requested by the driver. While at it, make the core check pm_runtime_suspended() when setting power.direct_complete so that it doesn't need to be checked by ->prepare callbacks. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Acked-by: Bjorn Helgaas Reviewed-by: Ulf Hansson

PM / sleep: Remove pm_complete_with_resume_check()

2017-10-11T13:40:29Z

According to recent changes for ACPI, the are longer any users of pm_complete_with_resume_check(), thus let's drop it. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq()

2017-07-24T21:53:45Z

Put the device interrupts disabling and enabling as well as cpuidle_pause() and cpuidle_resume() called during the "noirq" stages of system suspend into separate functions to allow the core suspend-to-idle code to be optimized (later). The only functional difference this makes is that debug facilities and diagnostic tools will not include the above operations into the "noirq" device suspend/resume duration measurements. Signed-off-by: Rafael J. Wysocki

PM / core: Drop run_wake flag from struct dev_pm_info

2017-06-27T23:52:52Z

The run_wake flag in struct dev_pm_info is used to indicate whether or not the device is capable of generating remote wakeup signals at run time (or in the system working state), but the distinction between runtime remote wakeup and system wakeup signaling has always been rather artificial. The only practical reason for it to exist at the core level was that ACPI and PCI treated those two cases differently, but that's not the case any more after recent changes. For this reason, get rid of the run_wake flag and, when applicable, use device_set_wakeup_capable() and device_can_wakeup() instead of device_set_run_wake() and device_run_wake(), respectively. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg Acked-by: Bjorn Helgaas

PM / core / docs: Convert sleep states API document to reST

2017-02-06T18:25:55Z

Move the document describing the system sleep state transitions API for devices to Documentation/driver-api/pm/, convert it to reST and update it to use current terminology. Also remove the remaining reference to the old version of it from pm.h. The new document still contains references to some documents in the .txt format that will be converted later. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jonathan Corbet

PM / core: Update kerneldoc comments in pm.h

2017-02-06T18:11:19Z

Refresh the struct dev_pm_ops kerneldoc comment, so that it looks better and is more readable after processing by Sphinx, and drop the kerneldoc marker from a few other comments ("PM_EVENT_ messages" and a couple of enum types declarations) which are not proper kerneldoc and generally confuse Sphinx. Also change the comment describing struct dev_pm_domain into a kerneldoc one. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jonathan Corbet

Merge tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2016-12-13T19:42:18Z

Pull driver core updates from Greg KH: "Here's the new driver core patches for 4.10-rc1. Big thing here is the nice addition of "functional dependencies" to the driver core. The idea has been talked about for a very long time, great job to Rafael for stepping up and implementing it. It's been tested for longer than the 4.9-rc1 date, we held off on merging it earlier in order to feel more comfortable about it. Other than that, it's just a handful of small other patches, some good cleanups to the mess that is the firmware class code, and we have a test driver for the deferred probe logic. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) firmware: Correct handling of fw_state_wait() return value driver core: Silence device links sphinx warning firmware: remove warning at documentation generation time drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments driver core: test_async: fix up typo found by 0-day firmware: move fw_state_is_done() into UHM section firmware: do not use fw_lock for fw_state protection firmware: drop bit ops in favor of simple state machine firmware: refactor loading status firmware: fix usermode helper fallback loading driver core: firmware_class: convert to use class_groups driver core: devcoredump: convert to use class_groups driver core: class: add class_groups support kernfs: Declare two local data structures static driver-core: fix platform_no_drv_owner.cocci warnings drivers/base/memory.c: Remove unused 'first_page' variable driver core: add CLASS_ATTR_WO() drivers: base: cacheinfo: support DT overrides for cache properties drivers: base: cacheinfo: add pr_fmt logging drivers: base: cacheinfo: fix boot error message when acpi is enabled ...