user/sven/linux.git/include/linux/pm_runtime.h, branch v3.0.85

PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)

2011-04-29T22:25:44Z

Many different platforms and subsystems may want to disable device clocks during suspend and enable them during resume which is going to be done in a very similar way in all those cases. For this reason, provide generic routines for the manipulation of device clocks during suspend and resume. Convert the ARM shmobile platform to using the new routines. Signed-off-by: Rafael J. Wysocki

PM: Do not create wakeup sysfs files for devices that cannot wake up

2011-03-14T23:43:14Z

Currently, wakeup sysfs attributes are created for all devices, regardless of whether or not they are wakeup-capable. This is excessive and complicates wakeup device identification from user space (i.e. to identify wakeup-capable devices user space has to read /sys/devices/.../power/wakeup for all devices and see if they are not empty). Fix this issue by avoiding to create wakeup sysfs files for devices that cannot wake up the system from sleep states (i.e. whose power.can_wakeup flags are unset during registration) and modify device_set_wakeup_capable() so that it adds (or removes) the relevant sysfs attributes if a device's wakeup capability status is changed. Signed-off-by: Rafael J. Wysocki

PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionally

2010-12-24T14:04:06Z

The __pm_generic_resume() function changes the given device's runtime PM status to RPM_ACTIVE if its driver's callback returns 0, but it only should do that if the rumtime PM is enabled for the device. Signed-off-by: Rafael J. Wysocki

PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3)

2010-12-24T14:02:41Z

This patch (as1431c) makes the synchronous runtime-PM interface suitable for use in interrupt handlers. Subsystems can call the new pm_runtime_irq_safe() function to tell the PM core that a device's runtime_suspend and runtime_resume callbacks should be invoked with interrupts disabled and the spinlock held. This permits the pm_runtime_get_sync() and the new pm_runtime_put_sync_suspend() routines to be called from within interrupt handlers. When a device is declared irq-safe in this way, the PM core increments the parent's usage count, so the parent will never be runtime suspended. This prevents difficult situations in which an irq-safe device can't resume because it is forced to wait for its non-irq-safe parent. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki

PM / Runtime: Fix pm_runtime_suspended()

2010-12-16T16:12:25Z

There are some situations (e.g. in __pm_generic_call()), where pm_runtime_suspended() is used to decide whether or not to execute a device's (system) ->suspend() callback. The callback is not executed if pm_runtime_suspended() returns true, but it does so for devices that don't even support runtime PM, because the power.disable_depth device field is ignored by it. This leads to problems (i.e. devices are not suspened when they should), so rework pm_runtime_suspended() so that it returns false if the device's power.disable_depth field is different from zero. Signed-off-by: Rafael J. Wysocki Cc: stable@kernel.org

PM: runtime: add missed pm_request_autosuspend

2010-10-16T23:57:48Z

The patch "PM / Runtime: Implement autosuspend support" introduces "autosuspend" facility for runtime PM, but misses helper function of pm_request_autosuspend, so add it. Signed-off-by: Ming Lei Signed-off-by: Rafael J. Wysocki

PM / Runtime: Implement autosuspend support

2010-10-16T23:57:48Z

This patch (as1427) implements the "autosuspend" facility for runtime PM. A few new fields are added to the dev_pm_info structure and several new PM helper functions are defined, for telling the PM core whether or not a device uses autosuspend, for setting the autosuspend delay, and for marking periods of device activity. Drivers that do not want to use autosuspend can continue using the same helper functions as before; their behavior will not change. In addition, drivers supporting autosuspend can also call the old helper functions to get the old behavior. The details are all explained in Documentation/power/runtime_pm.txt and Documentation/ABI/testing/sysfs-devices-power. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki

PM / Runtime: Add no_callbacks flag

2010-10-16T23:57:47Z

Some devices, such as USB interfaces, cannot be power-managed independently of their parents, i.e., they cannot be put in low power while the parent remains at full power. This patch (as1425) creates a new "no_callbacks" flag, which tells the PM core not to invoke the runtime-PM callback routines for the such devices but instead to assume that the callbacks always succeed. In addition, the non-debugging runtime-PM sysfs attributes for the devices are removed, since they are pretty much meaningless. The advantage of this scheme comes not so much from avoiding the callbacks themselves, but rather from the fact that without the need for a process context in which to run the callbacks, more work can be done in interrupt context. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki

PM / Runtime: Combine runtime PM entry points

2010-10-16T23:57:47Z

This patch (as1424) combines the various public entry points for the runtime PM routines into three simple functions: one for idle, one for suspend, and one for resume. A new bitflag specifies whether or not to increment or decrement the usage_count field. The new entry points are named __pm_runtime_idle, __pm_runtime_suspend, and __pm_runtime_resume, to reflect that they are trampolines. Simultaneously, the corresponding internal routines are renamed to rpm_idle, rpm_suspend, and rpm_resume. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki

PM / Runtime: Replace boolean arguments with bitflags

2010-10-16T23:57:44Z

The "from_wq" argument in __pm_runtime_suspend() and __pm_runtime_resume() supposedly indicates whether or not the function was called by the PM workqueue thread, but in fact it isn't always used this way. It really indicates whether or not the function should return early if the requested operation is already in progress. Along with this badly-named boolean argument, later patches in this series will add several other boolean arguments to these functions and others. Therefore this patch (as1422) begins the conversion process by replacing from_wq with a bitflag argument. The same bitflags are also used in __pm_runtime_get() and __pm_runtime_put(), where they indicate whether or not the operation should be asynchronous. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki