user/sven/linux.git/include/linux/pm_runtime.h, branch v3.9

pm / runtime: introduce pm_runtime_set_memalloc_noio()

2013-02-24T01:50:16Z

Introduce the flag memalloc_noio in 'struct dev_pm_info' to help PM core to teach mm not allocating memory with GFP_KERNEL flag for avoiding probable deadlock. As explained in the comment, any GFP_KERNEL allocation inside runtime_resume() or runtime_suspend() on any one of device in the path from one block or network device to the root device in the device tree may cause deadlock, the introduced pm_runtime_set_memalloc_noio() sets or clears the flag on device in the path recursively. Signed-off-by: Ming Lei Cc: Minchan Kim Cc: Alan Stern Cc: Oliver Neukum Cc: Jiri Kosina Cc: Mel Gorman Cc: KAMEZAWA Hiroyuki Cc: Michal Hocko Cc: Ingo Molnar Cc: Peter Zijlstra Cc: "Rafael J. Wysocki" Cc: Greg KH Cc: Jens Axboe Cc: "David S. Miller" Cc: Eric Dumazet Cc: David Decotigny Cc: Tom Herbert Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

PM / Runtime: Add new helper function: pm_runtime_active()

2013-01-25T23:39:12Z

This boolean function simply returns whether or not the runtime status of the device is 'active'. The typical scenario is driver calls pm_runtime_get firstly, then check pm_runtime_active in atomic environment. Also add entry to Documentation/power/runtime.txt Signed-off-by: Yanmin Zhang Signed-off-by: ShuoX Liu Signed-off-by: Rafael J. Wysocki

PM / Runtime: Remove device fields related to suspend time, v2

2012-05-01T19:28:38Z

After the previous changes in default_stop_ok() and default_power_down_ok() for PM domains, there are two fields in struct dev_pm_info that aren't necessary any more, suspend_time and max_time_suspended_ns. Remove those fields along with all of the code that accesses them, which simplifies the runtime PM framework quite a bit. Signed-off-by: Rafael J. Wysocki

PM / Runtime: Use device PM QoS constraints (v2)

2011-12-01T20:46:42Z

Make the runtime PM core use device PM QoS constraints to check if it is allowed to suspend a given device, so that an error code is returned if the device's own PM QoS constraint is negative or one of its children has already been suspended for too long. If this is not the case, the maximum estimated time the device is allowed to be suspended, computed as the minimum of the device's PM QoS constraint and the PM QoS constraints of its children (reduced by the difference between the current time and their suspend times) is stored in a new device's PM field power.max_time_suspended_ns that can be used by the device's subsystem or PM domain to decide whether or not to put the device into lower-power (and presumably higher-latency) states later (if the constraint is 0, which means "no constraint", the power.max_time_suspended_ns is set to -1). Additionally, the time of execution of the subsystem-level .runtime_suspend() callback for the device is recorded in the new power.suspend_time field for later use by the device's subsystem or PM domain along with power.max_time_suspended_ns (it also is used by the core code when the device's parent is suspended). Introduce a new helper function, pm_runtime_update_max_time_suspended(), allowing subsystems and PM domains (or device drivers) to update the power.max_time_suspended_ns field, for example after changing the power state of a suspended device. Signed-off-by: Rafael J. Wysocki

PM Sleep: Do not extend wakeup paths to devices with ignore_children set

2011-11-17T20:39:33Z

Commit 4ca46ff3e0d8c234cb40ebb6457653b59584426c (PM / Sleep: Mark devices involved in wakeup signaling during suspend) introduced the power.wakeup_path field in struct dev_pm_info to mark devices whose children are enabled to wake up the system from sleep states, so that power domains containing the parents that provide their children with wakeup power and/or relay their wakeup signals are not turned off. Unfortunately, that introduced a PM regression on SH7372 whose power consumption in the system "memory sleep" state increased as a result of it, because it prevented the power domain containing the I2C controller from being turned off when some children of that controller were enabled to wake up the system, although the controller was not necessary for them to signal wakeup. To fix this issue use the observation that devices whose power.ignore_children flag is set for runtime PM should be treated analogously during system suspend. Namely, they shouldn't be included in wakeup paths going through their children. Since the SH7372 I2C controller's power.ignore_children flag is set, doing so will restore the previous behavior of that SOC. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman

pm_runtime.h: explicitly requires notifier.h

2011-10-31T23:32:30Z

This file was getting notifier.h via device.h --> module.h but the module.h inclusion is going away, so add notifier.h directly. Signed-off-by: Paul Gortmaker

PM: Move clock-related definitions and headers to separate file

2011-08-25T13:34:19Z

Since the PM clock management code in drivers/base/power/clock_ops.c is used for both runtime PM and system suspend/hibernation, the definitions of data structures and headers related to it should not be located in include/linux/pm_rumtime.h. Move them to a separate header file. Signed-off-by: Rafael J. Wysocki

PM / Domains: Use power.sybsys_data to reduce overhead

2011-08-25T13:34:12Z

Currently pm_genpd_runtime_resume() has to walk the list of devices from the device's PM domain to find the corresponding device list object containing the need_restore field to check if the driver's .runtime_resume() callback should be executed for the device. This is suboptimal and can be simplified by using power.sybsys_data to store device information used by the generic PM domains code. Signed-off-by: Rafael J. Wysocki

PM: Introduce struct pm_subsys_data

2011-08-25T13:33:50Z

Introduce struct pm_subsys_data that may be subclassed by subsystems to store subsystem-specific information related to the device. Move the clock management fields accessed through the power.subsys_data pointer in struct device to the new strucutre. Signed-off-by: Rafael J. Wysocki

PM / Runtime: Add new helper function: pm_runtime_status_suspended()

2011-07-12T09:17:09Z

This boolean function simply returns whether or not the runtime status of the device is 'suspended'. Unlike pm_runtime_suspended(), this function returns the runtime status whether or not runtime PM for the device has been disabled or not. Also add entry to Documentation/power/runtime.txt Signed-off-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki