user/sven/linux.git/include/linux/pm_runtime.h, branch v4.9.147

PM / Runtime: Move ignore_children flag under CONFIG_PM

2016-04-21T23:32:37Z

The ignore_children flag is used only when CONFIG_PM is set, so let's move it into that section within the struct dev_pm_info. Move also the corresponding pm_suspend_ignore_children() API out of device.h into pm_runtime.h, to be consistent with similar APIs. Unfortunate this causes the Toshiba PCI SD mmc host driver to fail to compile as it needs pm_runtime.h, so let's fix this here as well. Signed-off-by: Ulf Hansson Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM / runtime: Add new helper for conditional usage count incrementation

2015-12-21T02:11:12Z

Introduce a new runtime PM function, pm_runtime_get_if_in_use(), that will increment the device's runtime PM usage counter and return 1 if its status is RPM_ACTIVE and its usage counter is greater than 0 at the same time (0 will be returned otherwise). This is useful for things that should only be done if the device is active (from the runtime PM perspective) and used by somebody (as indicated by the usage counter) already and they are not worth bothering otherwise. Requested-by: Imre Deak Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM / sleep: Allow devices without runtime PM to do direct-complete

2015-07-21T21:14:22Z

Don't unset the direct_complete flag on devices that have runtime PM disabled, if they are runtime suspended. This is needed because otherwise ancestor devices wouldn't be able to do direct_complete without adding runtime PM support to all its descendants. Also removes pm_runtime_suspended_if_enabled() because it's now unused. Signed-off-by: Tomeu Vizoso Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki

Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

2014-12-12T23:26:48Z

Pull ARM updates from Russell King: "The major updates included in this update are: - Clang compatible stack pointer accesses by Behan Webster. - SA11x0 updates from Dmitry Eremin-Solenikov. - kgdb handling of breakpoints with read-only text/modules - Support for Privileged-no-execute feature on ARMv7 to prevent userspace code execution by the kernel. - AMBA primecell bus handling of irq-safe runtime PM - Unwinding support for memset/memzero/memmove/memcpy functions - VFP fixes for Krait CPUs and improvements in detecting the VFP architecture - A number of code cleanups (using pr_*, removing or reducing the severity of a couple of kernel messages, splitting ftrace asm code out to a separate file, etc.) - Add machine name to stack dump output" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (62 commits) ARM: 8247/2: pcmcia: sa1100: make use of device clock ARM: 8246/2: pcmcia: sa1111: provide device clock ARM: 8245/1: pcmcia: soc-common: enable/disable socket clocks ARM: 8244/1: fbdev: sa1100fb: make use of device clock ARM: 8243/1: sa1100: add a clock alias for sa1111 pcmcia device ARM: 8242/1: sa1100: add cpu clock ARM: 8221/1: PJ4: allow building in Thumb-2 mode ARM: 8234/1: sa1100: reorder IRQ handling code ARM: 8233/1: sa1100: switch to hwirq usage ARM: 8232/1: sa1100: merge GPIO multiplexer IRQ to "normal" irq domain ARM: 8231/1: sa1100: introduce irqdomains support ARM: 8230/1: sa1100: shift IRQs by one ARM: 8229/1: sa1100: replace irq numbers with names in irq driver ARM: 8228/1: sa1100: drop entry-macro.S ARM: 8227/1: sa1100: switch to MULTI_IRQ_HANDLER ARM: 8241/1: Update processor_modes for hyp and monitor mode ARM: 8240/1: MCPM: document mcpm_sync_init() ARM: 8239/1: Introduce {set,clear}_pte_bit ARM: 8238/1: mm: Refine set_memory_* functions ARM: 8237/1: fix flush_pfn_alias ...

PM: Drop CONFIG_PM_RUNTIME from the driver core

2014-12-03T23:46:58Z

After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM or even may be dropped entirely in some cases. Replace CONFIG_PM_RUNTIME with CONFIG_PM in the PM core code. Reviewed-by: Ulf Hansson Acked-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki

ARM: 8199/1: PM / Runtime: Add getter for querying the IRQ safe option v12

2014-11-17T20:23:34Z

Add a simple getter pm_runtime_is_irq_safe() for querying whether runtime PM IRQ safe was set or not. Various bus drivers implementing runtime PM may use choose to suspend differently based on IRQ safeness status of child driver (e.g. do not unprepare the clock if IRQ safe is not set). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Ulf Hansson Acked-by: Rafael J. Wysocki Signed-off-by: Russell King

PM: Create PM workqueue if runtime PM is not configured too

2014-07-22T23:00:36Z

The PM workqueue is going to be used by ACPI PM notify handlers regardless of whether or not runtime PM is configured, so move it out of #ifdef CONFIG_PM_RUNTIME. Do that in three places in the ACPI device PM code. Signed-off-by: Rafael J. Wysocki

PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily

2014-05-16T21:15:44Z

Currently, some subsystems (e.g. PCI and the ACPI PM domain) have to resume all runtime-suspended devices during system suspend, mostly because those devices may need to be reprogrammed due to different wakeup settings for system sleep and for runtime PM. For some devices, though, it's OK to remain in runtime suspend throughout a complete system suspend/resume cycle (if the device was in runtime suspend at the start of the cycle). We would like to do this whenever possible, to avoid the overhead of extra power-up and power-down events. However, problems may arise because the device's descendants may require it to be at full power at various points during the cycle. Therefore the most straightforward way to do this safely is if the device and all its descendants can remain runtime suspended until the complete stage of system resume. To this end, introduce a new device PM flag, power.direct_complete and modify the PM core to use that flag as follows. If the ->prepare() callback of a device returns a positive number, the PM core will regard that as an indication that it may leave the device runtime-suspended. It will then check if the system power transition in progress is a suspend (and not hibernation in particular) and if the device is, indeed, runtime-suspended. In that case, the PM core will set the device's power.direct_complete flag. Otherwise it will clear power.direct_complete for the device and it also will later clear it for the device's parent (if there's one). Next, the PM core will not invoke the ->suspend() ->suspend_late(), ->suspend_irq(), ->resume_irq(), ->resume_early(), or ->resume() callbacks for all devices having power.direct_complete set. It will invoke their ->complete() callbacks, however, and those callbacks are then responsible for resuming the devices as appropriate, if necessary. For example, in some cases they may need to queue up runtime resume requests for the devices using pm_request_resume(). Changelog partly based on an Alan Stern's description of the idea (http://marc.info/?l=linux-pm&m=139940466625569&w=2). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern

PM: Add pm_runtime_suspend|resume_force functions

2014-03-01T23:18:15Z

This patch provides two new runtime PM helper functions which intend to be used from system suspend/resume callbacks, to make sure devices are put into low power state during system suspend and brought back to full power at system resume. The prerequisite is to have all levels of a device's runtime PM callbacks to be defined through the SET_PM_RUNTIME_PM_OPS macro, which means these are available for CONFIG_PM. By using the new runtime PM helper functions especially the two scenarios below will be addressed. 1) The PM core prevents .runtime_suspend callbacks from being invoked during system suspend. That means even for a runtime PM centric subsystem and driver, the device needs to be put into low power state from a system suspend callback. Otherwise it may very well be left in full power state (runtime resumed) while the system is suspended. By using the new helper functions, we make sure to walk the hierarchy of a device's power domain, subsystem and driver. 2) Subsystems and drivers need to cope with all the combinations of CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. The two new helper functions smothly addresses this. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM / Runtime: Implement the pm_generic_runtime functions for CONFIG_PM

2013-12-22T00:39:58Z

The pm_generic_runtime_suspend|resume functions were implemented within CONFIG_PM_RUNTIME. As we also may use runtime PM callbacks during system suspend, to put devices into low power state, we need to move the implementation of pm_generic_runtime_suspend|resume to CONFIG_PM. This change gives a power domain provision to invoke a platform driver's runtime PM callback from a power domain's system PM callback. This were earlier prevented by the platform bus, since it uses the pm_generic_runtime_suspend|resume functions as runtime PM callbacks. Cc: Kevin Hilman Cc: Alan Stern Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki