user/sven/linux.git/include/linux/pm_runtime.h, branch v5.6.10

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428

2019-06-05T15:37:16Z

Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Armijn Hemel Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge back earlier PM core material for v5.1.

2019-02-01T10:53:35Z

PM-runtime: Fix deadlock with ktime_get()

2019-01-30T21:49:06Z

A deadlock has been seen when swicthing clocksources which use PM-runtime. The call path is: change_clocksource ... write_seqcount_begin ... timekeeping_update ... sh_cmt_clocksource_enable ... rpm_resume pm_runtime_mark_last_busy ktime_get do read_seqcount_begin while read_seqcount_retry .... write_seqcount_end Although we should be safe because we haven't yet changed the clocksource at that time, we can't do that because of seqcount protection. Use ktime_get_mono_fast_ns() instead which is lock safe for such cases. With ktime_get_mono_fast_ns, the timestamp is not guaranteed to be monotonic across an update and as a result can goes backward. According to update_fast_timekeeper() description: "In the worst case, this can result is a slightly wrong timestamp (a few nanoseconds)". For PM-runtime autosuspend, this means only that the suspend decision may be slightly suboptimal. Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers") Reported-by: Biju Das Signed-off-by: Vincent Guittot Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

PM-runtime: Add new interface to get accounted time

2019-01-15T21:47:24Z

Some drivers (like i915/drm) needs to get the accounted suspended time. pm_runtime_suspended_time() will return the suspended accounted time in ns unit. Reviewed-by: Ulf Hansson Signed-off-by: Vincent Guittot Signed-off-by: Rafael J. Wysocki

PM-runtime: Switch autosuspend over to using hrtimers

2018-12-19T09:31:50Z

PM-runtime uses the timer infrastructure for autosuspend. This implies that the minimum time before autosuspending a device is in the range of 1 tick included to 2 ticks excluded -On arm64 this means between 4ms and 8ms with default jiffies configuration -And on arm, it is between 10ms and 20ms These values are quite high for embedded systems which sometimes want the duration to be in the range of 1 ms. It is possible to switch autosuspend over to using hrtimers to get finer granularity for short durations and take advantage of slack to retain some margins and get long timeouts with minimum wakeups. On an arm64 platform that uses 1ms for autosuspending timeout of its GPU, idle power is reduced by 10% with hrtimer. The latency impact on arm64 hikey octo cores is: - mark_last_busy: from 1.11 us to 1.25 us - rpm_suspend: from 15.54 us to 15.38 us [Only the code path of rpm_suspend() that starts hrtimer has been measured.] arm64 image (arm64 default defconfig) decreases by around 3KB with following details: $ size vmlinux-timer text data bss dec hex filename 12034646 6869268 386840 19290754 1265a82 vmlinux $ size vmlinux-hrtimer text data bss dec hex filename 12030550 6870164 387032 19287746 1264ec2 vmlinux The latency impact on arm 32bits snowball dual cores is : - mark_last_busy: from 0.31 us usec to 0.77 us - rpm_suspend: from 6.83 us to 6.67 usec The increase of the image for snowball platform that I used for testing performance impact, is neglictable (244B). $ size vmlinux-timer text data bss dec hex filename 7157961 2119580 264120 9541661 91981d build-ux500/vmlinux size vmlinux-hrtimer text data bss dec hex filename 7157773 2119884 264248 9541905 919911 vmlinux-hrtimer And arm 32bits image (multi_v7_defconfig) increases by around 1.7KB with following details: $ size vmlinux-timer text data bss dec hex filename 13304443 6803420 402768 20510631 138f7a7 vmlinux $ size vmlinux-hrtimer text data bss dec hex filename 13304299 6805276 402768 20512343 138fe57 vmlinux Signed-off-by: Vincent Guittot Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

Revert "PM / runtime: Fixup reference counting of device link suppliers at probe"

2018-06-12T08:24:13Z

Revert commit 1e8378619841 (PM / runtime: Fixup reference counting of device link suppliers at probe), as it has introduced a regression and the condition it was designed to address should be covered by the existing code. Reported-by: Marek Szyprowski Signed-off-by: Rafael J. Wysocki

PM / runtime: Fixup reference counting of device link suppliers at probe

2018-05-27T10:10:32Z

In the driver core, before it invokes really_probe() it runtime resumes the suppliers for the device via calling pm_runtime_get_suppliers(), which also increases the runtime PM usage count for each of the available supplier. This makes sense, as to be able to allow the consumer device to be probed by its driver. However, if the driver decides to add a new supplier link during ->probe(), hence updating the list of suppliers, the following call to pm_runtime_put_suppliers(), invoked after really_probe() in the driver core, we get into trouble. More precisely, pm_runtime_put() gets called also for the new supplier(s), which is wrong as the driver core, didn't trigger pm_runtime_get_sync() to be called for it in the first place. In other words, the new supplier may be runtime suspended even in cases when it shouldn't. Fix this behaviour, by runtime resume suppliers according to the same conditions as managed by the runtime PM core, when runtime resume callbacks are being invoked. Additionally, don't try to runtime suspend any of the suppliers after really_probe(), but instead rely on that to happen via the consumer device, when it becomes runtime suspended. Fixes: 21d5c57b3726 (PM / runtime: Use device links) Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki

locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

2017-10-25T09:01:08Z

Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland Signed-off-by: Paul E. McKenney Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar

PM / core: Drop run_wake flag from struct dev_pm_info

2017-06-27T23:52:52Z

The run_wake flag in struct dev_pm_info is used to indicate whether or not the device is capable of generating remote wakeup signals at run time (or in the system working state), but the distinction between runtime remote wakeup and system wakeup signaling has always been rather artificial. The only practical reason for it to exist at the core level was that ACPI and PCI treated those two cases differently, but that's not the case any more after recent changes. For this reason, get rid of the run_wake flag and, when applicable, use device_set_wakeup_capable() and device_can_wakeup() instead of device_set_run_wake() and device_run_wake(), respectively. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg Acked-by: Bjorn Helgaas

Merge tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2016-12-13T19:42:18Z

Pull driver core updates from Greg KH: "Here's the new driver core patches for 4.10-rc1. Big thing here is the nice addition of "functional dependencies" to the driver core. The idea has been talked about for a very long time, great job to Rafael for stepping up and implementing it. It's been tested for longer than the 4.9-rc1 date, we held off on merging it earlier in order to feel more comfortable about it. Other than that, it's just a handful of small other patches, some good cleanups to the mess that is the firmware class code, and we have a test driver for the deferred probe logic. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) firmware: Correct handling of fw_state_wait() return value driver core: Silence device links sphinx warning firmware: remove warning at documentation generation time drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments driver core: test_async: fix up typo found by 0-day firmware: move fw_state_is_done() into UHM section firmware: do not use fw_lock for fw_state protection firmware: drop bit ops in favor of simple state machine firmware: refactor loading status firmware: fix usermode helper fallback loading driver core: firmware_class: convert to use class_groups driver core: devcoredump: convert to use class_groups driver core: class: add class_groups support kernfs: Declare two local data structures static driver-core: fix platform_no_drv_owner.cocci warnings drivers/base/memory.c: Remove unused 'first_page' variable driver core: add CLASS_ATTR_WO() drivers: base: cacheinfo: support DT overrides for cache properties drivers: base: cacheinfo: add pr_fmt logging drivers: base: cacheinfo: fix boot error message when acpi is enabled ...