user/sven/linux.git/include/linux/power, branch v3.3.4

sbs-battery: Rename internals to new name

2012-01-06T01:22:21Z

Now that this driver is named more generally, this change updates the internal variables, defines and functions to use this new name. Signed-off-by: Rhyland Klein Signed-off-by: Anton Vorontsov

bq20z75: Rename to sbs-battery

2012-01-06T01:22:12Z

This driver for the bq20z75 implemented the register spec defined by the SBS standard. As this is not unique to this the TI part this was originally written for, we can generalize this driver to show its support for any SBS compliant battery. Signed-off-by: Rhyland Klein Signed-off-by: Anton Vorontsov

power_supply: Charger-Manager: Add properties for power-supply-class

2012-01-04T04:08:45Z

Charger Manager provides power-supply-class aggregating information from multiple chargers and a fuel-gauge. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Anton Vorontsov

power_supply: Add initial Charger-Manager driver

2012-01-04T04:08:27Z

Because battery health monitoring should be done even when suspended, it needs to wake up and suspend periodically. Thus, userspace battery monitoring may incur too much overhead; every device and task is woken up periodically. Charger Manager uses suspend-again to provide in-suspend monitoring. This patch allows to monitor battery health in-suspend state. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Anton Vorontsov

power_supply: MAX17042: Support additional properties

2011-07-08T13:01:58Z

This patch supports additional properties (PRESENT, CYCLE_COUNT, VOLTAGE_MAX, VOLTAGE_MIN_DESIGN, CURRENT_NOW, CURRENT_AVG, CHARGE_FULL, and TEMP). Plus, initialization code for registers is added. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: KyungMin Park Signed-off-by: Anton Vorontsov

bq20z75: Add support for external notification

2011-07-08T12:53:07Z

Adding support for external power change notification. One problem found is that there is a lag time before the sensor will return a new status. To ensure that we only fire off the power_supply_changed event when the status returned from the sensor is actually different, we delay sending the the notification, and instead poll on it looking for a change. The amount of time to poll is configurable via platform data. Signed-off-by: Rhyland Klein Signed-off-by: Anton Vorontsov

isp1704_charger: Allow board specific powering routine

2011-04-20T13:48:49Z

The ISP1704/1707 chip can be put to full power down state by asserting the CHIP_SEL line. This patch enables platform or board specific hooks to put the device into power down mode in case not needed. This patch is a preparation for enabling this powering routine in n900 (rx-51) devices. Thanks to Heikki Krogerus for helping out with the patch. Signed-off-by: Kalle Jokiniemi Acked-By: Heikki Krogerus Signed-off-by: Anton Vorontsov

power_supply: Add driver for MAX8903 charger

2011-04-20T13:48:48Z

MAX8903 is an integrated battery charger and selector with two power inputs (USB and AC adapter). This driver enables the charger, handles interrupts, and provides power-supply-class information to userland. Tested on Exynos4 NURI / S5PC210 SLP7 boards. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Anton Vorontsov

bq20z75: Add i2c retry mechanism

2011-03-01T19:24:19Z

With the support of platform data, now adding support for option i2c retries on read/write failures. Ths is specified through the optional platform data. Signed-off-by: Rhyland Klein Signed-off-by: Anton Vorontsov

bq20z75: Add optional battery detect gpio

2011-03-01T19:24:01Z

Adding support for an optional gpio for battery detection. This is passed in through the i2c platform data. It also accepts another field, battery_detect_present to signify the gpio state which means the battery is present, either 0 (low) or 1 (high). Signed-off-by: Rhyland Klein Signed-off-by: Anton Vorontsov