user/sven/linux.git/include/linux/regmap.h, branch v5.8.11

Merge series "regmap: provide simple bitops and use them in a driver" from Bartosz Golaszewski

2020-05-29T13:00:44Z

Bartosz Golaszewski : From: Bartosz Golaszewski I noticed that oftentimes I use regmap_update_bits() for simple bit setting or clearing. In this case the fourth argument is superfluous as it's always 0 or equal to the mask argument. This series proposes to add simple bit operations for setting, clearing and testing specific bits with regmap. The second patch uses all three in a driver that got recently picked into the net-next tree. The patches obviously target different trees so - if you're ok with the change itself - I propose you pick the first one into your regmap tree for v5.8 and then I'll resend the second patch to add the first user for these macros for v5.9. v1 -> v2: - convert the new macros to static inline functions v2 -> v3: - drop unneeded ternary operator Bartosz Golaszewski (2): regmap: provide helpers for simple bit operations net: ethernet: mtk-star-emac: use regmap bitops drivers/base/regmap/regmap.c | 22 +++++ drivers/net/ethernet/mediatek/mtk_star_emac.c | 80 ++++++++----------- include/linux/regmap.h | 36 +++++++++ 3 files changed, 93 insertions(+), 45 deletions(-) base-commit: 8f3d9f354286745c751374f5f1fcafee6b3f3136 -- 2.26.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Merge series "New DSA driver for VSC9953 Seville switch" from Vladimir Oltean :

2020-05-29T13:00:43Z

Looking at the Felix and Ocelot drivers, Maxim asked if it would be possible to use them as a base for a new driver for the switch inside NXP T1040. Turns out, it is! The result is a driver eerily similar to Felix. The biggest challenge seems to be getting register read/write API generic enough to cover such wild bitfield variations between hardware generations. There is a patch on the regmap core which I would like to get in through the networking subsystem, if possible (and if Mark is ok), since it's a trivial addition. Maxim Kochetkov (4): soc/mscc: ocelot: add MII registers description net: mscc: ocelot: convert SYS_PAUSE_CFG register access to regfield net: mscc: ocelot: extend watermark encoding function net: dsa: ocelot: introduce driver for Seville VSC9953 switch Vladimir Oltean (7): regmap: add helper for per-port regfield initialization net: mscc: ocelot: unexport ocelot_probe_port net: mscc: ocelot: convert port registers to regmap net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields net: dsa: ocelot: create a template for the DSA tags on xmit net: mscc: ocelot: split writes to pause frame enable bit and to thresholds net: mscc: ocelot: disable flow control on NPI interface drivers/net/dsa/ocelot/Kconfig | 12 + drivers/net/dsa/ocelot/Makefile | 6 + drivers/net/dsa/ocelot/felix.c | 49 +- drivers/net/dsa/ocelot/felix_vsc9959.c | 72 +- drivers/net/dsa/ocelot/seville.c | 742 +++++++++++++++ drivers/net/dsa/ocelot/seville.h | 50 + drivers/net/dsa/ocelot/seville_vsc9953.c | 1064 ++++++++++++++++++++++ drivers/net/ethernet/mscc/ocelot.c | 87 +- drivers/net/ethernet/mscc/ocelot.h | 9 +- drivers/net/ethernet/mscc/ocelot_board.c | 21 +- drivers/net/ethernet/mscc/ocelot_io.c | 18 +- drivers/net/ethernet/mscc/ocelot_regs.c | 57 ++ include/linux/regmap.h | 8 + include/soc/mscc/ocelot.h | 68 +- include/soc/mscc/ocelot_dev.h | 78 -- include/soc/mscc/ocelot_qsys.h | 13 - include/soc/mscc/ocelot_sys.h | 23 - net/dsa/tag_ocelot.c | 21 +- 18 files changed, 2196 insertions(+), 202 deletions(-) create mode 100644 drivers/net/dsa/ocelot/seville.c create mode 100644 drivers/net/dsa/ocelot/seville.h create mode 100644 drivers/net/dsa/ocelot/seville_vsc9953.c base-commit: 8f3d9f354286745c751374f5f1fcafee6b3f3136 -- 2.25.1

regmap: provide helpers for simple bit operations

2020-05-29T13:00:42Z

In many instances regmap_update_bits() is used for simple bit setting and clearing. In these cases the last argument is redundant and we can hide it with a static inline function. This adds three new helpers for simple bit operations: set_bits, clear_bits and test_bits (the last one defined as a regular function). Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20200528154503.26304-2-brgl@bgdev.pl Signed-off-by: Mark Brown

regmap: add helper for per-port regfield initialization

2020-05-29T12:44:30Z

Similar to the standalone regfields, add an initializer for the users who need to set .id_size and .id_offset in order to use the regmap_fields_update_bits_base API. Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20200527234113.2491988-2-olteanv@gmail.com Signed-off-by: Mark Brown

regmap: Simplify implementation of the regmap_field_read_poll_timeout() macro

2020-04-20T14:47:32Z

Simplify the implementation of the macro regmap_field_read_poll_timeout() by using the macro read_poll_timeout(). Signed-off-by: Dejin Zheng Link: https://lore.kernel.org/r/20200420134647.9121-3-zhengdejin5@gmail.com Signed-off-by: Mark Brown

regmap: Simplify implementation of the regmap_read_poll_timeout() macro

2020-04-20T14:47:31Z

Simplify the implementation of the macro regmap_read_poll_timeout() by using the macro read_poll_timeout(). Signed-off-by: Dejin Zheng Link: https://lore.kernel.org/r/20200420134647.9121-2-zhengdejin5@gmail.com Signed-off-by: Mark Brown

Merge series "Add support for Kontron sl28cpld" from Michael Walle :

2020-04-14T15:37:32Z

The Kontron sl28cpld is a board management chip providing gpio, pwm, fan monitoring and an interrupt controller. For now this controller is used on the Kontron SMARC-sAL28 board. But because of its flexible nature, it might also be used on other boards in the future. The individual blocks (like gpio, pwm, etc) are kept intentionally small. The MFD core driver then instantiates different (or multiple of the same) blocks. It also provides the register layout so it might be updated in the future without a device tree change; and support other boards with a different layout or functionalities. See also [1] for more information. This is my first take of a MFD driver. I don't know whether the subsystem maintainers should only be CCed on the patches which affect the subsystem or on all patches for this series. I've chosen the latter so you can get a more complete picture. [1] https://lore.kernel.org/linux-devicetree/0e3e8204ab992d75aa07fc36af7e4ab2@walle.cc/ Changes since v1: - use of_match_table in all drivers, needed for automatic module loading, when using OF_MFD_CELL() - add new gpio-regmap.c which adds a generic regmap gpio_chip implemention - new patch for reqmap_irq, so we can reuse its implementation - remove almost any code from gpio-sl28cpld.c, instead use gpio-regmap and regmap-irq - change the handling of the mfd core vs device tree nodes; add a new property "of_reg" to the mfd_cell struct which, when set, is matched to the unit-address of the device tree nodes. - fix sl28cpld watchdog when it is not initialized by the bootloader. Explicitly set the operation mode. - also add support for kontron,assert-wdt-timeout-pin in sl28cpld-wdt. As suggested by Bartosz Golaszewski: - define registers as hex - make gpio enum uppercase - move parent regmap check before memory allocation - use device_property_read_bool() instead of the of_ version - mention the gpio flavors in the bindings documentation As suggested by Guenter Roeck: - cleanup #includes and sort them - use devm_watchdog_register_device() - use watchdog_stop_on_reboot() - provide a Documentation/hwmon/sl28cpld.rst - cleaned up the weird tristate->bool and I2C=y issue. Instead mention that the MFD driver is bool because of the following intc patch - removed the SL28CPLD_IRQ typo As suggested by Rob Herring: - combine all dt bindings docs into one patch - change the node name for all gpio flavors to "gpio" - removed the interrupts-extended rule - cleaned up the unit-address space, see above Michael Walle (16): include/linux/ioport.h: add helper to define REG resource constructs mfd: mfd-core: Don't overwrite the dma_mask of the child device mfd: mfd-core: match device tree node against reg property regmap-irq: make it possible to add irq_chip do a specific device node dt-bindings: mfd: Add bindings for sl28cpld mfd: Add support for Kontron sl28cpld management controller irqchip: add sl28cpld interrupt controller support watchdog: add support for sl28cpld watchdog pwm: add support for sl28cpld PWM controller gpio: add a reusable generic gpio_chip using regmap gpio: add support for the sl28cpld GPIO controller hwmon: add support for the sl28cpld hardware monitoring controller arm64: dts: freescale: sl28: enable sl28cpld arm64: dts: freescale: sl28: map GPIOs to input events arm64: dts: freescale: sl28: enable LED support arm64: dts: freescale: sl28: enable fan support .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 51 +++ .../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++ .../bindings/mfd/kontron,sl28cpld.yaml | 162 +++++++++ .../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++ .../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++ Documentation/hwmon/sl28cpld.rst | 36 ++ .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 14 + .../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 + .../freescale/fsl-ls1028a-kontron-sl28.dts | 124 +++++++ drivers/base/regmap/regmap-irq.c | 84 ++++- drivers/gpio/Kconfig | 15 + drivers/gpio/Makefile | 2 + drivers/gpio/gpio-regmap.c | 321 ++++++++++++++++++ drivers/gpio/gpio-sl28cpld.c | 187 ++++++++++ drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/sl28cpld-hwmon.c | 152 +++++++++ drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-sl28cpld.c | 99 ++++++ drivers/mfd/Kconfig | 21 ++ drivers/mfd/Makefile | 2 + drivers/mfd/mfd-core.c | 31 +- drivers/mfd/sl28cpld.c | 154 +++++++++ drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-sl28cpld.c | 204 +++++++++++ drivers/watchdog/Kconfig | 11 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sl28cpld_wdt.c | 242 +++++++++++++ include/linux/gpio-regmap.h | 88 +++++ include/linux/ioport.h | 5 + include/linux/mfd/core.h | 26 +- include/linux/regmap.h | 10 + 34 files changed, 2142 insertions(+), 32 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml create mode 100644 Documentation/hwmon/sl28cpld.rst create mode 100644 drivers/gpio/gpio-regmap.c create mode 100644 drivers/gpio/gpio-sl28cpld.c create mode 100644 drivers/hwmon/sl28cpld-hwmon.c create mode 100644 drivers/irqchip/irq-sl28cpld.c create mode 100644 drivers/mfd/sl28cpld.c create mode 100644 drivers/pwm/pwm-sl28cpld.c create mode 100644 drivers/watchdog/sl28cpld_wdt.c create mode 100644 include/linux/gpio-regmap.h -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

regmap: add reg_sequence helpers

2020-04-14T15:37:30Z

Add helper to make it easier to define a reg_sequence array. Signed-off-by: Marco Felsch Link: https://lore.kernel.org/r/20200402084111.30123-1-m.felsch@pengutronix.de Signed-off-by: Mark Brown

regmap-irq: make it possible to add irq_chip do a specific device node

2020-04-14T15:21:37Z

Add a new function regmap_add_irq_chip_np() with its corresponding devm_regmap_add_irq_chip_np() variant. Sometimes one want to register the IRQ domain on a different device node that the one of the regmap node. For example when using a MFD where there are different interrupt controllers and particularly for the generic regmap gpio_chip/irq_chip driver. In this case it is not desireable to have the IRQ domain on the parent node. Signed-off-by: Michael Walle Link: https://lore.kernel.org/r/20200402203656.27047-5-michael@walle.cc Signed-off-by: Mark Brown

regmap: wrong descriptions in regmap_range_cfg

2020-02-19T18:12:31Z

Swap selector_mask and selector_shift descriptions Signed-off-by: Phong LE Link: https://lore.kernel.org/r/20200219140906.29180-1-ple@baylibre.com Signed-off-by: Mark Brown