user/sven/linux.git/include/linux/regulator, branch v5.13.19

regulator: core: Fix off_on_delay handling

2021-04-23T12:18:35Z

The jiffies-based off_on_delay implementation has a couple of problems that cause it to sometimes not actually delay for the required time: (1) If, for example, the off_on_delay time is equivalent to one jiffy, and the ->last_off_jiffy is set just before a new jiffy starts, then _regulator_do_enable() does not wait at all since it checks using time_before(). (2) When jiffies overflows, the value of "remaining" becomes higher than "max_delay" and the code simply proceeds without waiting. Fix these problems by changing it to use ktime_t instead. [Note that since jiffies doesn't start at zero but at INITIAL_JIFFIES ("-5 minutes"), (2) above also led to the code not delaying if the first regulator_enable() is called when the ->last_off_jiffy is not initialised, such as for regulators with ->constraints->boot_on set. It's not clear to me if this was intended or not, but I've preserved this behaviour explicitly with the check for a non-zero ->last_off.] Signed-off-by: Vincent Whitchurch Link: https://lore.kernel.org/r/20210423114524.26414-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown

regulator: Add regmap helper for ramp-delay setting

2021-04-02T17:33:59Z

Quite a few regulator ICs do support setting ramp-delay by writing a value matching the delay to a ramp-delay register. Provide a simple helper for table-based delay setting. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/f101f1db564cf32cb58719c77af0b00d7236bb89.1617020713.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown

regulator: helpers: Export helper voltage listing

2021-04-02T17:33:58Z

Some drivers need to translate voltage values to selectors prior regulator registration. Currently a regulator_desc based list_voltages helper is only exported for regulators using the linear_ranges. Export similar helper also for regulators using simple linear mapping. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/1200ef7a50c84327ada019b85f6527b4fc9b5ce1.1617020713.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown

regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting

2021-03-10T12:22:26Z

The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the voltage for the buck regulators 1, 2 and 3. This has no effect as the PRESET_EN bit is set by default and therefore the preset values are used instead, which are set to 850 mV. To fix this we clear the PRESET_EN bit at time of initialization. Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver") Cc: Signed-off-by: Frieder Schrempf Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de Signed-off-by: Mark Brown

Merge remote-tracking branch 'regulator/for-5.12' into regulator-next

2021-02-12T14:00:07Z

regulator: pca9450: Enable system reset on WDOG_B assertion

2021-02-11T13:11:35Z

By default the PCA9450 doesn't handle the assertion of the WDOG_B signal, but this is required to guarantee that things like software resets triggered by the watchdog work reliably. As we don't want to rely on the bootloader to enable this, we tell the PMIC to issue a cold reset in case the WDOG_B signal is asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does. Signed-off-by: Frieder Schrempf Link: https://lore.kernel.org/r/20210211105534.38972-3-frieder.schrempf@kontron.de Signed-off-by: Mark Brown

regulator: mt6315: Add support for MT6315 regulator

2021-02-08T11:48:48Z

The MT6315 is a regulator found on boards based on MediaTek MT8192 and probably other SoCs. It connects as a slave to SoC using SPMI. Signed-off-by: Hsin-Hsiung Wang Link: https://lore.kernel.org/r/1612678457-11548-3-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Mark Brown

regulator: consumer: Add missing stubs to regulator/consumer.h

2021-01-21T12:35:42Z

Add missing stubs to regulator/consumer.h in order to fix COMPILE_TEST of the kernel. In particular this should fix compile-testing of OPP core because of a missing stub for regulator_sync_voltage(). Reported-by: kernel test robot Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20210120205844.12658-1-digetx@gmail.com Signed-off-by: Mark Brown

regulator: ab8500: Decomission platform data header

2021-01-13T11:36:19Z

The platform data header was only used to pass platform data from board files. We now populate the regulators exclusively from device tree, so the header contents can be moved into the regulator drivers. Cc: Lee Jones Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20201205004057.1712753-2-linus.walleij@linaro.org Signed-off-by: Mark Brown

regulator: ab8500: Remove unused platform data

2021-01-13T11:36:18Z

The struct ab8500_regulator_platform_data was a leftover since the days before we probed all regulators from the device tree. The ab8500-ext regulator was the only used, defining platform data and register intialization that was never used for anything, a copy of a boardfile no longer in use. Delete the ab8500_regulator_platform_data and make the ab8500-ext regulator reference the regulator init data in the local file directly. We are 100% device tree these days. Cc: Lee Jones Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20201205004057.1712753-1-linus.walleij@linaro.org Signed-off-by: Mark Brown