user/sven/linux.git/include/linux/rtc.h, branch v3.9

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2013-02-21T20:05:51Z

Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...

driver-core: constify data for class_find_device()

2013-02-06T20:18:56Z

All in-kernel users of class_find_device() don't really need mutable data for match callback. In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c) this patch changes match callbacks to use const search data. The const is propagated to rtc_class_open() and power_supply_get_by_name() parameters. Note that there's a dev reference leak in suspend_test.c that's not touched in this patch. Signed-off-by: Michał Mirosław Acked-by: Grant Likely Signed-off-by: Greg Kroah-Hartman

NTP: Add a CONFIG_RTC_SYSTOHC configuration

2013-01-16T02:16:06Z

The purpose of this option is to allow ARM/etc systems that rely on the class RTC subsystem to have the same kind of automatic NTP based synchronization that we have on PC platforms. Today ARM does not implement update_persistent_clock and makes extensive use of the class RTC system. When enabled CONFIG_RTC_SYSTOHC will provide a generic rtc_update_persistent_clock that stores the current time in the RTC and is intended complement the existing CONFIG_RTC_HCTOSYS option that loads the RTC at boot. Like with RTC_HCTOSYS the platform's update_persistent_clock is used first, if it works. Platforms with mixed class RTC and non-RTC drivers need to return ENODEV when class RTC should be used. Such an update for PPC is included in this patch. Long term, implementations of update_persistent_clock should migrate to proper class RTC drivers and use CONFIG_RTC_SYSTOHC instead. Tested on ARM kirkwood and PPC405 Signed-off-by: Jason Gunthorpe Signed-off-by: John Stultz

UAPI: (Scripted) Disintegrate include/linux

2012-10-13T09:46:48Z

Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones

rtc_sysfs_show_hctosys(): display 0 if resume failed

2012-10-05T18:05:04Z

Without this patch /sys/class/rtc/$CONFIG_RTC_HCTOSYS_DEVICE/hctosys contains a 1 (meaning "This rtc was used to initialize the system clock") even if setting the time by do_settimeofday() at bootup failed. The RTC can also be used to set the clock on resume, if it did 1, otherwise 0. Previously there was no indication if the RTC was used to set the clock in resume. This uses only CONFIG_RTC_HCTOSYS_DEVICE for conditional compilation instead of it and CONFIG_RTC_HCTOSYS to be more consistent. rtc_hctosys_ret was moved to class.c so class.c no longer depends on hctosys.c. [sfr@canb.auug.org.au: fix build] Signed-off-by: David Fries Cc: Matthew Garrett Cc: Alessandro Zummo Cc: Uwe Kleine-König Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: add ioctl to get/clear battery low voltage status

2012-05-29T23:22:33Z

Currently there is no generic way to get the RTC battery status within an application. So add an ioctl to read the status bit. The idea is that the bit is set once a low voltage is detected. It stays there until it is reset using the RTC_VL_CLR ioctl. Signed-off-by: Alexander Stein Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rtc: Provide flag for rtc devices that don't support UIE

2012-03-16T01:23:10Z

Richard Weinberger noticed that on some RTC hardware that doesn't support UIE mode, due to coarse granular alarms (like 1minute resolution), the current virtualized RTC support doesn't properly error out when UIE is enabled. Instead the current code queues an alarm for the next second, but it won't fire until up to a miniute later. This patch provides a generic way to flag this sort of hardware and fixes the issue on the mpc5121 where Richard noticed the problem. CC: stable@vger.kernel.org Reported-by: Richard Weinberger Tested-by: Richard Weinberger Signed-off-by: John Stultz

rtc: Limit RTC PIE frequency

2011-07-26T21:50:01Z

The RTC pie hrtimer is self rearming. We really need to limit the frequency to something sensible. Thus limit it to the 8192Hz max value from the rtc man documentation Cc: Willy Tarreau Cc: stable@kernel.org Signed-off-by: Thomas Gleixner [jstultz: slightly reworked to use RTC_MAX_FREQ value] Signed-off-by: John Stultz

drivers/rtc/rtc-mxc.c: remove defines already included in rtc.h

2011-05-27T00:12:33Z

[akpm@linux-foundation.org: retain the code comments] Signed-off-by: Wolfram Sang Cc: Vladimir Zapolskiy Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

RTC: Fix early irqs caused by calling rtc_set_alarm too early

2011-03-30T01:44:05Z

When we register an rtc device at boot, we read the alarm value in hardware and set the rtc device's aie_timer to that value. The initial method to do this was to simply call rtc_set_alarm() with the value read from hardware. However, this may cause problems as rtc_set_alarm may enable interupts, and the RTC alarm might fire, which can cause invalid pointer dereferencing since the RTC registration is not complete. This patch solves the issue by initializing the rtc_device.aie_timer y hand via rtc_initialize_alarm(). This avoids any calls to the RTC hardware which might enable interrupts too early. CC: Thomas Gleixner CC: Alessandro Zummo Reported-by: Konrad Rzeszutek Wilk Tested-by: Konrad Rzeszutek Wilk Signed-off-by: John Stultz