user/sven/linux.git/include/linux/scatterlist.h, branch v4.14.231

lib/scatterlist: Introduce sgl_alloc() and sgl_free()

2019-11-12T18:18:30Z

commit e80a0af4759a164214f02da157a3800753ce135f upstream. Many kernel drivers contain code that allocates and frees both a scatterlist and the pages that populate that scatterlist. Introduce functions in lib/scatterlist.c that perform these tasks instead of duplicating this functionality in multiple drivers. Only include these functions in the build if CONFIG_SGL_ALLOC=y to avoid that the kernel size increases if this functionality is not used. Signed-off-by: Bart Van Assche Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

scatterlist: add sg_zero_buffer() helper

2017-06-15T12:30:14Z

The sg_zero_buffer() helper is used to zero fill an area in a SG list. Signed-off-by: Johannes Thumshirn Reviewed-by: Sagi Grimberg [hch: renamed to sg_zero_buffer] Signed-off-by: Christoph Hellwig

lib: scatterlist: move SG pool code from SCSI driver to lib/sg_pool.c

2016-04-15T20:53:14Z

Now it's ready to move the mempool based SG chained allocator code from SCSI driver to lib/sg_pool.c, which will be compiled only based on a Kconfig symbol CONFIG_SG_POOL. SCSI selects CONFIG_SG_POOL. Reviewed-by: Christoph Hellwig Signed-off-by: Ming Lin Reviewed-by: Sagi Grimberg Signed-off-by: Martin K. Petersen

lib: scatterlist: add sg splitting function

2015-08-24T20:28:01Z

Sometimes a scatter-gather has to be split into several chunks, or sub scatter lists. This happens for example if a scatter list will be handled by multiple DMA channels, each one filling a part of it. A concrete example comes with the media V4L2 API, where the scatter list is allocated from userspace to hold an image, regardless of the knowledge of how many DMAs will fill it : - in a simple RGB565 case, one DMA will pump data from the camera ISP to memory - in the trickier YUV422 case, 3 DMAs will pump data from the camera ISP pipes, one for pipe Y, one for pipe U and one for pipe V For these cases, it is necessary to split the original scatter list into multiple scatter lists, which is the purpose of this patch. The guarantees that are required for this patch are : - the intersection of spans of any couple of resulting scatter lists is empty. - the union of spans of all resulting scatter lists is a subrange of the span of the original scatter list. - streaming DMA API operations (mapping, unmapping) should not happen both on both the resulting and the original scatter list. It's either the first or the later ones. - the caller is reponsible to call kfree() on the resulting scatterlists. Signed-off-by: Robert Jarzmik Signed-off-by: Jens Axboe

scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN

2015-08-17T14:12:51Z

There are a couple of uses of struct scatterlist that never go to the dma_map_sg() helper and thus don't care about ARCH_HAS_SG_CHAIN which indicates that we can map chained S/G list. The most important one is the crypto code, which currently has to open code a few helpers to always allow chaining. This patch removes a few #ifdef ARCH_HAS_SG_CHAIN statements so that we can switch the crypto code to these common helpers. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

drivers/scsi/scsi_debug.c: resolve sg buffer const-ness issue

2015-07-01T02:44:59Z

do_device_access() takes a separate parameter to indicate the direction of data transfer, which it used to use to select the appropriate function out of sg_pcopy_{to,from}_buffer(). However these two functions now have So this patch makes it bypass these wrappers and call the underlying function sg_copy_buffer() directly; this has the same calling style as do_device_access() i.e. a separate direction-of-transfer parameter and no pointers-to-const, so skipping the wrappers not only eliminates the warning, it also make the code simpler :) [akpm@linux-foundation.org: fix very broken build] Signed-off-by: Dave Gordon Acked-by: Arnd Bergmann Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

lib/scatterlist: mark input buffer parameters as 'const'

2015-07-01T02:44:59Z

The 'buf' parameter of sg(p)copy_from_buffer() can and should be const-qualified, although because of the shared implementation of _to_buffer() and _from_buffer(), we have to cast this away internally. This means that callers who have a 'const' buffer containing the data to be copied to the sg-list no longer have to cast away the const-ness themselves. It also enables improved coverage by code analysis tools. Signed-off-by: Dave Gordon Cc: Akinobu Mita Cc: "Martin K. Petersen" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'for-4.2/sg' of git://git.kernel.dk/linux-block

2015-06-25T22:22:36Z

Pull asm/scatterlist.h removal from Jens Axboe: "We don't have any specific arch scatterlist anymore, since parisc finally switched over. Kill the include" * 'for-4.2/sg' of git://git.kernel.dk/linux-block: remove scatterlist.h generation from arch Kbuild files remove

scatterlist: introduce sg_nents_for_len

2015-06-03T02:51:27Z

When performing a dma_map_sg() call, the number of sg entries to map is required. Using sg_nents to retrieve the number of sg entries will return the total number of entries in the sg list up to the entry marked as the end. If there happen to be unused entries in the list, these will still be counted. Some dma_map_sg() implementations will not handle the unused entries correctly (lib/swiotlb.c) and execute a BUG_ON. The sg_nents_for_len() function will traverse the sg list and return the number of entries required to satisfy the supplied length argument. This can then be supplied to the dma_map_sg() call to successfully map the sg. Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu