user/sven/linux.git/include/linux/sched/mm.h, branch v5.4.249

mm, hugetlb: allow for "high" userspace addresses

2022-05-09T07:03:28Z

commit 5f24d5a579d1eace79d505b148808a850b417d4c upstream. This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") for hugetlb. This patch adds support for "high" userspace addresses that are optionally supported on the system and have to be requested via a hint mechanism ("high" addr parameter to mmap). Architectures such as powerpc and x86 achieve this by making changes to their architectural versions of hugetlb_get_unmapped_area() function. However, arm64 uses the generic version of that function. So take into account arch_get_mmap_base() and arch_get_mmap_end() in hugetlb_get_unmapped_area(). To allow that, move those two macros out of mm/mmap.c into include/linux/sched/mm.h If these macros are not defined in architectural code then they default to (TASK_SIZE) and (base) so should not introduce any behavioural changes to architectures that do not define them. For the time being, only ARM64 is affected by this change. Catalin (ARM64) said "We should have fixed hugetlb_get_unmapped_area() as well when we added support for 52-bit VA. The reason for commit f6795053dac8 was to prevent normal mmap() from returning addresses above 48-bit by default as some user-space had hard assumptions about this. It's a slight ABI change if you do this for hugetlb_get_unmapped_area() but I doubt anyone would notice. It's more likely that the current behaviour would cause issues, so I'd rather have them consistent. Basically when arm64 gained support for 52-bit addresses we did not want user-space calling mmap() to suddenly get such high addresses, otherwise we could have inadvertently broken some programs (similar behaviour to x86 here). Hence we added commit f6795053dac8. But we missed hugetlbfs which could still get such high mmap() addresses. So in theory that's a potential regression that should have bee addressed at the same time as commit f6795053dac8 (and before arm64 enabled 52-bit addresses)" Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") Signed-off-by: Christophe Leroy Reviewed-by: Catalin Marinas Cc: Steve Capper Cc: Will Deacon Cc: [5.0.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

include/linux/sched/mm.h: use rcu_dereference in in_vfork()

2021-03-17T16:03:56Z

[ Upstream commit 149fc787353f65b7e72e05e7b75d34863266c3e2 ] Fix a sparse warning by using rcu_dereference(). Technically this is a bug and a sufficiently aggressive compiler could reload the `real_parent' pointer outside the protection of the rcu lock (and access freed memory), but I think it's pretty unlikely to happen. Link: https://lkml.kernel.org/r/20210221194207.1351703-1-willy@infradead.org Fixes: b18dc5f291c0 ("mm, oom: skip vforked tasks from being selected") Signed-off-by: Matthew Wilcox (Oracle) Reviewed-by: Miaohe Lin Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

sched/core: Fix illegal RCU from offline CPUs

2020-06-22T07:31:01Z

[ Upstream commit bf2c59fce4074e55d622089b34be3a6bc95484fb ] In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Qian Cai Signed-off-by: Peter Zijlstra (Intel) Acked-by: Michael Ellerman (powerpc) Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw Signed-off-by: Sasha Levin

exit/exec: Seperate mm_release()

2019-11-29T09:10:10Z

commit 4610ba7ad877fafc0a25a30c6c82015304120426 upstream. mm_release() contains the futex exit handling. mm_release() is called from do_exit()->exit_mm() and from exec()->exec_mm(). In the exit_mm() case PF_EXITING and the futex state is updated. In the exec_mm() case these states are not touched. As the futex exit code needs further protections against exit races, this needs to be split into two functions. Preparatory only, no functional change. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20191106224556.240518241@linutronix.de Signed-off-by: Greg Kroah-Hartman

sched/membarrier: Fix p->mm->membarrier_state racy load

2019-09-25T15:42:30Z

The membarrier_state field is located within the mm_struct, which is not guaranteed to exist when used from runqueue-lock-free iteration on runqueues by the membarrier system call. Copy the membarrier_state from the mm_struct into the scheduler runqueue when the scheduler switches between mm. When registering membarrier for mm, after setting the registration bit in the mm membarrier state, issue a synchronize_rcu() to ensure the scheduler observes the change. In order to take care of the case where a runqueue keeps executing the target mm without swapping to other mm, iterate over each runqueue and issue an IPI to copy the membarrier_state from the mm_struct into each runqueue which have the same mm which state has just been modified. Move the mm membarrier_state field closer to pgd in mm_struct to use a cache line already touched by the scheduler switch_mm. The membarrier_execve() (now membarrier_exec_mmap) hook now needs to clear the runqueue's membarrier state in addition to clear the mm membarrier state, so move its implementation into the scheduler membarrier code so it can access the runqueue structure. Add memory barrier in membarrier_exec_mmap() prior to clearing the membarrier state, ensuring memory accesses executed prior to exec are not reordered with the stores clearing the membarrier state. As suggested by Linus, move all membarrier.c RCU read-side locks outside of the for each cpu loops. Suggested-by: Linus Torvalds Signed-off-by: Mathieu Desnoyers Signed-off-by: Peter Zijlstra (Intel) Cc: Chris Metcalf Cc: Christoph Lameter Cc: Eric W. Biederman Cc: Kirill Tkhai Cc: Mike Galbraith Cc: Oleg Nesterov Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Russell King - ARM Linux admin Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190919173705.2181-5-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar

sched/membarrier: Call sync_core only before usermode for same mm

2019-09-25T15:42:30Z

When the prev and next task's mm change, switch_mm() provides the core serializing guarantees before returning to usermode. The only case where an explicit core serialization is needed is when the scheduler keeps the same mm for prev and next. Suggested-by: Oleg Nesterov Signed-off-by: Mathieu Desnoyers Signed-off-by: Peter Zijlstra (Intel) Cc: Chris Metcalf Cc: Christoph Lameter Cc: Eric W. Biederman Cc: Kirill Tkhai Cc: Linus Torvalds Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Russell King - ARM Linux admin Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190919173705.2181-4-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar

coredump: fix race condition between collapse_huge_page() and core dumping

2019-06-14T03:34:56Z

When fixing the race conditions between the coredump and the mmap_sem holders outside the context of the process, we focused on mmget_not_zero()/get_task_mm() callers in 04f5866e41fb70 ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping"), but those aren't the only cases where the mmap_sem can be taken outside of the context of the process as Michal Hocko noticed while backporting that commit to older -stable kernels. If mmgrab() is called in the context of the process, but then the mm_count reference is transferred outside the context of the process, that can also be a problem if the mmap_sem has to be taken for writing through that mm_count reference. khugepaged registration calls mmgrab() in the context of the process, but the mmap_sem for writing is taken later in the context of the khugepaged kernel thread. collapse_huge_page() after taking the mmap_sem for writing doesn't modify any vma, so it's not obvious that it could cause a problem to the coredump, but it happens to modify the pmd in a way that breaks an invariant that pmd_trans_huge_lock() relies upon. collapse_huge_page() needs the mmap_sem for writing just to block concurrent page faults that call pmd_trans_huge_lock(). Specifically the invariant that "!pmd_trans_huge()" cannot become a "pmd_trans_huge()" doesn't hold while collapse_huge_page() runs. The coredump will call __get_user_pages() without mmap_sem for reading, which eventually can invoke a lockless page fault which will need a functional pmd_trans_huge_lock(). So collapse_huge_page() needs to use mmget_still_valid() to check it's not running concurrently with the coredump... as long as the coredump can invoke page faults without holding the mmap_sem for reading. This has "Fixes: khugepaged" to facilitate backporting, but in my view it's more a bug in the coredump code that will eventually have to be rewritten to stop invoking page faults without the mmap_sem for reading. So the long term plan is still to drop all mmget_still_valid(). Link: http://lkml.kernel.org/r/20190607161558.32104-1-aarcange@redhat.com Fixes: ba76149f47d8 ("thp: khugepaged") Signed-off-by: Andrea Arcangeli Reported-by: Michal Hocko Acked-by: Michal Hocko Acked-by: Kirill A. Shutemov Cc: Oleg Nesterov Cc: Jann Horn Cc: Hugh Dickins Cc: Mike Rapoport Cc: Mike Kravetz Cc: Peter Xu Cc: Jason Gunthorpe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping

2019-04-19T16:46:05Z

The core dumping code has always run without holding the mmap_sem for writing, despite that is the only way to ensure that the entire vma layout will not change from under it. Only using some signal serialization on the processes belonging to the mm is not nearly enough. This was pointed out earlier. For example in Hugh's post from Jul 2017: https://lkml.kernel.org/r/alpine.LSU.2.11.1707191716030.2055@eggly.anvils "Not strictly relevant here, but a related note: I was very surprised to discover, only quite recently, how handle_mm_fault() may be called without down_read(mmap_sem) - when core dumping. That seems a misguided optimization to me, which would also be nice to correct" In particular because the growsdown and growsup can move the vm_start/vm_end the various loops the core dump does around the vma will not be consistent if page faults can happen concurrently. Pretty much all users calling mmget_not_zero()/get_task_mm() and then taking the mmap_sem had the potential to introduce unexpected side effects in the core dumping code. Adding mmap_sem for writing around the ->core_dump invocation is a viable long term fix, but it requires removing all copy user and page faults and to replace them with get_dump_page() for all binary formats which is not suitable as a short term fix. For the time being this solution manually covers the places that can confuse the core dump either by altering the vma layout or the vma flags while it runs. Once ->core_dump runs under mmap_sem for writing the function mmget_still_valid() can be dropped. Allowing mmap_sem protected sections to run in parallel with the coredump provides some minor parallelism advantage to the swapoff code (which seems to be safe enough by never mangling any vma field and can keep doing swapins in parallel to the core dumping) and to some other corner case. In order to facilitate the backporting I added "Fixes: 86039bd3b4e6" however the side effect of this same race condition in /proc/pid/mem should be reproducible since before 2.6.12-rc2 so I couldn't add any other "Fixes:" because there's no hash beyond the git genesis commit. Because find_extend_vma() is the only location outside of the process context that could modify the "mm" structures under mmap_sem for reading, by adding the mmget_still_valid() check to it, all other cases that take the mmap_sem for reading don't need the new check after mmget_not_zero()/get_task_mm(). The expand_stack() in page fault context also doesn't need the new check, because all tasks under core dumping are frozen. Link: http://lkml.kernel.org/r/20190325224949.11068-1-aarcange@redhat.com Fixes: 86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization") Signed-off-by: Andrea Arcangeli Reported-by: Jann Horn Suggested-by: Oleg Nesterov Acked-by: Peter Xu Reviewed-by: Mike Rapoport Reviewed-by: Oleg Nesterov Reviewed-by: Jann Horn Acked-by: Jason Gunthorpe Acked-by: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/cma: add PF flag to force non cma alloc

2019-03-06T05:07:19Z

Patch series "mm/kvm/vfio/ppc64: Migrate compound pages out of CMA region", v8. ppc64 uses the CMA area for the allocation of guest page table (hash page table). We won't be able to start guest if we fail to allocate hash page table. We have observed hash table allocation failure because we failed to migrate pages out of CMA region because they were pinned. This happen when we are using VFIO. VFIO on ppc64 pins the entire guest RAM. If the guest RAM pages get allocated out of CMA region, we won't be able to migrate those pages. The pages are also pinned for the lifetime of the guest. Currently we support migration of non-compound pages. With THP and with the addition of hugetlb migration we can end up allocating compound pages from CMA region. This patch series add support for migrating compound pages. This patch (of 4): Add PF_MEMALLOC_NOCMA which make sure any allocation in that context is marked non-movable and hence cannot be satisfied by CMA region. This is useful with get_user_pages_longterm where we want to take a page pin by migrating pages from CMA region. Marking the section PF_MEMALLOC_NOCMA ensures that we avoid unnecessary page migration later. Link: http://lkml.kernel.org/r/20190114095438.32470-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V Suggested-by: Andrea Arcangeli Reviewed-by: Andrea Arcangeli Cc: Michal Hocko Cc: Alexey Kardashevskiy Cc: David Gibson Cc: Michael Ellerman Cc: Mel Gorman Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sched: Fix various typos in comments

2018-12-03T10:55:42Z

Go over the scheduler source code and fix common typos in comments - and a typo in an actual variable name. No change in functionality intended. Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Linus Torvalds Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar