user/sven/linux.git/include/linux/seccomp.h, branch v5.8

seccomp: allow TSYNC and USER_NOTIF together

2020-03-04T22:48:54Z

The restriction introduced in 7a0df7fbc145 ("seccomp: Make NEW_LISTENER and TSYNC flags exclusive") is mostly artificial: there is enough information in a seccomp user notification to tell which thread triggered a notification. The reason it was introduced is because TSYNC makes the syscall return a thread-id on failure, and NEW_LISTENER returns an fd, and there's no way to distinguish between these two cases (well, I suppose the caller could check all fds it has, then do the syscall, and if the return value was an fd that already existed, then it must be a thread id, but bleh). Matthew would like to use these two flags together in the Chrome sandbox which wants to use TSYNC for video drivers and NEW_LISTENER to proxy syscalls. So, let's fix this ugliness by adding another flag, TSYNC_ESRCH, which tells the kernel to just return -ESRCH on a TSYNC error. This way, NEW_LISTENER (and any subsequent seccomp() commands that want to return positive values) don't conflict with each other. Suggested-by: Matthew Denton Signed-off-by: Tycho Andersen Link: https://lore.kernel.org/r/20200304180517.23867-1-tycho@tycho.ws Signed-off-by: Kees Cook

seccomp: simplify secure_computing()

2019-10-10T21:55:24Z

Afaict, the struct seccomp_data argument to secure_computing() is unused by all current callers. So let's remove it. The argument was added in [1]. It was added because having the arch supply the syscall arguments used to be faster than having it done by secure_computing() (cf. Andy's comment in [2]). This is not true anymore though. /* References */ [1]: 2f275de5d1ed ("seccomp: Add a seccomp_data parameter secure_computing()") [2]: https://lore.kernel.org/r/CALCETrU_fs_At-hTpr231kpaAd0z7xJN4ku-DvzhRU6cvcJA_w@mail.gmail.com Signed-off-by: Christian Brauner Cc: Andy Lutomirski Cc: Thomas Gleixner Cc: Will Drewry Cc: Oleg Nesterov Cc: linux-arm-kernel@lists.infradead.org Cc: linux-parisc@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: x86@kernel.org Acked-by: Borislav Petkov Acked-by: Andy Lutomirski Link: https://lore.kernel.org/r/20190924064420.6353-1-christian.brauner@ubuntu.com Signed-off-by: Kees Cook

seccomp: add a return code to trap to userspace

2018-12-12T00:28:41Z

This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen CC: Kees Cook CC: Andy Lutomirski CC: Oleg Nesterov CC: Eric W. Biederman CC: "Serge E. Hallyn" Acked-by: Serge Hallyn CC: Christian Brauner CC: Tyler Hicks CC: Akihiro Suda Signed-off-by: Kees Cook

seccomp: switch system call argument type to void *

2018-12-12T00:28:41Z

The const qualifier causes problems for any code that wants to write to the third argument of the seccomp syscall, as we will do in a future patch in this series. The third argument to the seccomp syscall is documented as void *, so rather than just dropping the const, let's switch everything to use void * as well. I believe this is safe because of 1. the documentation above, 2. there's no real type information exported about syscalls anywhere besides the man pages. Signed-off-by: Tycho Andersen CC: Kees Cook CC: Andy Lutomirski CC: Oleg Nesterov CC: Eric W. Biederman CC: "Serge E. Hallyn" Acked-by: Serge Hallyn CC: Christian Brauner CC: Tyler Hicks CC: Akihiro Suda Signed-off-by: Kees Cook

seccomp: Add filter flag to opt-out of SSB mitigation

2018-05-04T22:51:44Z

If a seccomp user is not interested in Speculative Store Bypass mitigation by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when adding filters. Signed-off-by: Kees Cook Signed-off-by: Thomas Gleixner

ptrace, seccomp: add support for retrieving seccomp metadata

2017-11-28T23:41:01Z

With the new SECCOMP_FILTER_FLAG_LOG, we need to be able to extract these flags for checkpoint restore, since they describe the state of a filter. So, let's add PTRACE_SECCOMP_GET_METADATA, similar to ..._GET_FILTER, which returns the metadata of the nth filter (right now, just the flags). Hopefully this will be future proof, and new per-filter metadata can be added to this struct. Signed-off-by: Tycho Andersen CC: Kees Cook CC: Andy Lutomirski CC: Oleg Nesterov Signed-off-by: Kees Cook

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW

2017-08-14T20:46:46Z

Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks Signed-off-by: Kees Cook

seccomp: remove 2-phase API

2016-06-14T17:54:40Z

Since nothing is using the 2-phase API, and it adds more complexity than benefit, remove it. Signed-off-by: Kees Cook Cc: Andy Lutomirski

seccomp: Add a seccomp_data parameter secure_computing()

2016-06-14T17:54:39Z

Currently, if arch code wants to supply seccomp_data directly to seccomp (which is generally much faster than having seccomp do it using the syscall_get_xyz() API), it has to use the two-phase seccomp hooks. Add it to the easy hooks, too. Cc: linux-arch@vger.kernel.org Signed-off-by: Andy Lutomirski Signed-off-by: Kees Cook