user/sven/linux.git/include/linux/serial_8250.h, branch v4.4.190

tty/early: make serial8250_early_{in,out} static again

2015-07-24T00:43:30Z

Commit ed71871bed719 ("tty/8250_early: Turn serial_in/serial_out into weak symbols") made these routines weak to allow platform specific Big endian override However recent updates to core, specifically ebc5e20082 ("serial: of_serial: Support big-endian register accesses") and 6e63be3fee14 ("serial: earlycon: Add support for big-endian MMIO accesses") means that round about way to overide the early serial accessors is no longer needed. Cc: Jiri Slaby Cc: Peter Hurley Cc: Rob Herring Cc: Kevin Cernekee Acked-by: Noam Camus Signed-off-by: Vineet Gupta Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: 8250: Split base port operations from universal driver

2015-07-24T00:43:01Z

Refactor base port operations into new file; 8250_port.c. Legacy irq handling, RSA port support, port storage for universal driver, driver definition, module parameters and linkage remain in 8250_core.c The source file split and resulting modules is diagrammed below: 8250_core.c ====> 8250_core.c __ \ \ \ +-- 8250.ko (alias 8250_core) \ 8250_pnp.c __/ (universal driver) \ => 8250_port.c __ \ +-- 8250_base.ko 8250_dma.c __/ (port operations) Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: 8250: include from serial_8250.h

2015-05-31T07:21:38Z

The header file, include/linux/serial_8250.h, contains references to UART_LSR_BRK_ERROR_BITS and UART_MSR_ANY_DELTA that are defined in . Signed-off-by: Masahiro Yamada Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

tty: serial: 8250: export early_serial8250_setup function

2015-05-10T17:00:05Z

8250-like uart driver may call early_serial8250_setup to reuse 8250_early.c character output function. Signed-off-by: Eddie Huang Tested-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman

serial: 8250: Decouple RSA probe

2015-03-26T17:18:20Z

Prepare for 8250 split; separate RSA probe and resource management from base port operations. Override base port operations for the config_port(), request_port() and release_port() methods to implement the optional RSA probe and resource management only in the universal/legacy 8250 driver. Introduce 'probe' flags for 8250 ports, which allows drivers higher up the driver stack to enable optional probes. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: 8250: Separate legacy irq handling from core port operations

2015-03-26T17:15:16Z

Prepare for 8250 split; decouple irq setup/teardown and handler from core port operations. Introduce setup_irq() and release_irq() 8250 driver methods; the 8250 core will use these methods to install and remove irq handling for the given 8250 port. Refactor irq chain linking/unlinking from 8250 core into univ8250_setup_irq()/univ8250_release_irq() for the universal 8250 driver. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: 8250_early: Remove setup_early_serial8250_console()

2015-03-26T16:25:27Z

setup_earlycon() will now match and register the desired earlycon from the param string (as if 'earlycon=...' had been set on the command line). Use setup_earlycon() from existing arch call sites which start an earlycon directly. Acked-by: Rob Herring Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

console: Add extensible console matching

2015-03-26T15:16:20Z

Add match() method to struct console which allows the console to perform console command line matching instead of (or in addition to) default console matching (ie., by fixed name and index). The match() method returns 0 to indicate a successful match; normal console matching occurs if no match() method is defined or the match() method returns non-zero. The match() method is expected to set the console index if required. Re-implement earlycon-to-console-handoff with direct matching of "console=uart|uart8250,..." to the 8250 ttyS console. Acked-by: Rob Herring Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: 8250: Use canary to restart console after suspend

2015-02-02T18:11:27Z

When using no_console_suspend, the serial console may be powered off anyway during system sleep. Upon resume, the port may be in its default power-on state, but is expected to continue console i/o before the device has received its pm callback. The resultant garbage i/o can cause all kinds of havoc on the remote end. Use the scratch register as a canary to discover if the console has been powered-off. Write a non-zero value to the scratch register at port suspend and reprogram the port before any console i/o if the scratch register != canary before port resume. This workaround is disabled for omap_8250 (which uses different divisor programming). Credit to Doug Anderson for the idea of using the scratch register canary to discover port power-down. Cc: Doug Anderson Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: omap_8250: Fix RTS handling

2015-01-09T22:10:46Z

The OMAP3 UART ignores MCR[1] (ie., UART_MCR_RTS) when in autoRTS mode (UPF_HARD_FLOW + CRTSCTS). This makes it impossible for either the serial core or userspace to manually flow control the sender. Disable autoRTS mode when RTS is lowered and restore the previous mode when RTS is raised. Note that the OMAP3 UART provides no mechanism for switching from autoRTS mode without corrupting incoming data; to access the necessary register, the line control settings must be set to 8-e-2 and thus any data received during that time will be interpreted with those settings. This corruption has been observed in practice. Cc: Sebastian Andrzej Siewior Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman