user/sven/linux.git/include/linux/serial_core.h, branch v4.2.4

serial: core: Fix unused variable warnings from uart_console()

2015-05-06T20:27:00Z

If CONFIG_SERIAL_CORE_CONSOLE=n, build warnings are generated by uart_console() macro expansion: drivers/tty/serial/of_serial.c: In function ‘of_serial_suspend_8250’: drivers/tty/serial/of_serial.c:262:20: warning: unused variable ‘port’ [-Wunused-variable] struct uart_port *port = &port8250->port; ^ drivers/tty/serial/of_serial.c: In function ‘of_serial_resume_8250’: drivers/tty/serial/of_serial.c:272:20: warning: unused variable ‘port’ [-Wunused-variable] struct uart_port *port = &port8250->port; Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

earlycon: Fix __earlycon_table stride

2015-04-10T12:39:53Z

The compiler and the linker must agree on the alignment of struct earlycon_id; empirical testing and commit 07fca0e57fca92 ("tracing: Properly align linker defined symbols") suggests 32-byte alignment is the LCD. Reported-by: Yinghai Lu Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: 8250: allow specifying iomem size in addition to address

2015-03-26T21:50:15Z

This adds a mapsize field to struct uart_port to be used in conjunction with mapbase. If set, it overrides whatever value serial8250_port_size() would otherwise report. Signed-off-by: Mans Rullgard Signed-off-by: Greg Kroah-Hartman

serial: earlycon: Enable earlycon without command line param

2015-03-26T16:25:27Z

Earlycon matching can only be triggered if 'earlycon=...' has been specified on the kernel command line. To workaround this limitation requires tight coupling between arches and specific serial drivers in order to start an earlycon. Devicetree avoids this limitation with a link table that contains the required data to match earlycons. Mirror this approach for earlycon match by name. Re-purpose EARLYCON_DECLARE to generate a table entry which associates name with setup() function. Re-purpose setup_earlycon() to scan this table for an earlycon match, which is registered if found. Declare one "earlycon" early_param, which calls setup_earlycon(). This design allows setup_earlycon() to be called directly with a param string (as if 'earlycon=...' had been set on the command line). Re-registration (either directly or by early_param) is prevented. Acked-by: Rob Herring Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: core: Add minor field to uart_port

2015-03-26T15:10:11Z

UART drivers that share ttyS namespace cannot trivially compute the ttyS index from the port->line value since the minor_start may be offset from minor 64. Further, to do so requires a pointer to the uart driver since there is no back pointer from uart_port to uart_driver. Rather than have UART drivers computing the minor value by themselves, encapsulate within the serial core at port registration time. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

Merge 4.0-rc3 into tty-testing

2015-03-09T06:08:37Z

This resolves a merge issue in drivers/tty/serial/8250/8250_pci.c Signed-off-by: Greg Kroah-Hartman

serial: earlycon: Refactor parse_options into serial core

2015-03-07T02:55:07Z

Prepare to support console-defined matching; refactor the command line parameter string processing from parse_options() into a new core function, uart_parse_earlycon(), which decodes command line parameters of the form: earlycon=,io|mmio|mmio32,, console=,io|mmio|mmio32,, earlycon=,0x, console=,0x, Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: uapi: Declare all userspace-visible io types

2015-03-07T02:39:55Z

ioctl(TIOCGSERIAL|TIOCSSERIAL) report and can change the port->iotype. UART drivers use the UPIO_* definitions, but the uapi header defines parallel values and userspace uses these parallel values for ioctls; thus the userspace values are definitive. Define UPIO_* iotypes in terms of the uapi defines, SERIAL_IO_*; extend the uapi defines to include all values in use by the serial core. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: core: Fix iotype userspace breakage

2015-03-07T02:39:55Z

commit 3ffb1a8193bea ("serial: core: Add big-endian iotype") re-numbered userspace-dependent values; ioctl(TIOCSSERIAL) can assign the port iotype (which is expected to match the selected i/o accessors), so iotype values must not be changed. Cc: Kevin Cernekee Cc: # 3.19+ Signed-off-by: Peter Hurley Reviewed-by: Kevin Cernekee Signed-off-by: Greg Kroah-Hartman

serial: core: Rework hw-assisted flow control support

2015-02-02T18:11:28Z

hw-assisted flow control support was added to the serial core in v3.8 with commits, dba05832cbe4f ("SERIAL: core: add hardware assisted h/w flow control support") 2cbacafd7af0f ("SERIAL: core: add hardware assisted s/w flow control support") 9aba8d5b01119 ("SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control") Since then, additional requirements for serial core support have arisen. Specifically, 1. Separate tx and rx flow control settings for UARTs which only support tx flow control (ie., autoCTS). 2. Disable sw-assisted CTS flow control in autoCTS mode 3. Support for RTS flow control by serial core and userspace in autoRTS mode Distinguish mode from capability; introduce UPSTAT_AUTORTS, UPSTAT_AUTOCTS and UPSTAT_AUTOXOFF which, when set by the uart driver, enable serial core support for hw-assisted rx, hw-assisted tx and hw-assisted in-band/IXOFF rx flow control, respectively. [Note: hw-assisted in-band/IXON tx flow control does not require serial core support/intervention and can be enabled by the uart driver when required.] These modes must be set/reset in the driver's set_termios() method, based on termios settings, and thus can be safely queried in any context in which one of the port lock, port mutex or termios rwsem are held. Set these modes in the 2 in-tree drivers, omap-serial and 8250_omap, which currently use UPF_HARD_FLOW/UPF_SOFT_FLOW support. Retain UPF_HARD_FLOW and UPF_SOFT_FLOW as capabilities; re-define UPF_HARD_FLOW as both UPF_AUTO_RTS and UPF_AUTO_CTS to allow for distinct and separate rx and tx flow control capabilities. Disable sw-assisted CTS flow control when UPSTAT_AUTOCTS is enabled. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman