user/sven/linux.git/include/linux/shm.h, branch v4.14.92

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge branch 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2017-09-15T00:37:26Z

Pull ipc compat cleanup and 64-bit time_t from Al Viro: "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa Dinamani" * 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: utimes: Make utimes y2038 safe ipc: shm: Make shmid_kernel timestamps y2038 safe ipc: sem: Make sem_array timestamps y2038 safe ipc: msg: Make msg_queue timestamps y2038 safe ipc: mqueue: Replace timespec with timespec64 ipc: Make sys_semtimedop() y2038 safe get rid of SYSVIPC_COMPAT on ia64 semtimedop(): move compat to native shmat(2): move compat to native msgrcv(2), msgsnd(2): move compat to native ipc(2): move compat to native ipc: make use of compat ipc_perm helpers semctl(): move compat to native semctl(): separate all layout-dependent copyin/copyout msgctl(): move compat to native msgctl(): split the actual work from copyin/copyout ipc: move compat shmctl to native shmctl: split the work from copyin/copyout

mm: shm: use new hugetlb size encoding definitions

2017-09-07T00:27:28Z

Use the common definitions from hugetlb_encode.h header file for encoding hugetlb size definitions in shmget system call flags. In addition, move these definitions from the internal (kernel) to user (uapi) header file. Link: http://lkml.kernel.org/r/1501527386-10736-4-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Suggested-by: Matthew Wilcox Acked-by: Michal Hocko Cc: Andi Kleen Cc: Andrea Arcangeli Cc: Aneesh Kumar K.V Cc: Anshuman Khandual Cc: Arnd Bergmann Cc: Davidlohr Bueso Cc: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ipc: shm: Make shmid_kernel timestamps y2038 safe

2017-09-04T00:24:29Z

time_t is not y2038 safe. Replace all uses of time_t by y2038 safe time64_t. Similarly, replace the calls to get_seconds() with y2038 safe ktime_get_real_seconds(). Note that this preserves fast access on 64 bit systems, but 32 bit systems need sequence counters. The syscall interfaces themselves are not changed as part of the patch. They will be part of a different series. Signed-off-by: Deepa Dinamani Reviewed-by: Arnd Bergmann Signed-off-by: Al Viro

randstruct: Mark various structs for randomization

2017-06-30T19:00:51Z

This marks many critical kernel structures for randomization. These are structures that have been targeted in the past in security exploits, or contain functions pointers, pointers to function pointer tables, lists, workqueues, ref-counters, credentials, permissions, or are otherwise sensitive. This initial list was extracted from Brad Spengler/PaX Team's code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Left out of this list is task_struct, which requires special handling and will be covered in a subsequent patch. Signed-off-by: Kees Cook

ipc/shm.c: is_file_shm_hugepages() can be boolean

2016-01-21T01:09:18Z

Make is_file_shm_hugepages() return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

shm: remove unneeded extern for function

2014-08-08T22:57:26Z

A small cleanup while changing adjacent code. Extern is not needed for functions and only one declaration had it so remove it from the odd line. Signed-off-by: Milton Miller Signed-off-by: Jack Miller Cc: Davidlohr Bueso Cc: Manfred Spraul Cc: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

shm: make exit_shm work proportional to task activity

2014-08-08T22:57:26Z

This is small set of patches our team has had kicking around for a few versions internally that fixes tasks getting hung on shm_exit when there are many threads hammering it at once. Anton wrote a simple test to cause the issue: http://ozlabs.org/~anton/junkcode/bust_shm_exit.c Before applying this patchset, this test code will cause either hanging tracebacks or pthread out of memory errors. After this patchset, it will still produce output like: root@somehost:~# ./bust_shm_exit 1024 160 ... INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 116, t=2111 jiffies, g=241, c=240, q=7113) INFO: Stall ended before state dump start ... But the task will continue to run along happily, so we consider this an improvement over hanging, even if it's a bit noisy. This patch (of 3): exit_shm obtains the ipc_ns shm rwsem for write and holds it while it walks every shared memory segment in the namespace. Thus the amount of work is related to the number of shm segments in the namespace not the number of segments that might need to be cleaned. In addition, this occurs after the task has been notified the thread has exited, so the number of tasks waiting for the ns shm rwsem can grow without bound until memory is exausted. Add a list to the task struct of all shmids allocated by this task. Init the list head in copy_process. Use the ns->rwsem for locking. Add segments after id is added, remove before removing from id. On unshare of NEW_IPCNS orphan any ids as if the task had exited, similar to handling of semaphore undo. I chose a define for the init sequence since its a simple list init, otherwise it would require a function call to avoid include loops between the semaphore code and the task struct. Converting the list_del to list_del_init for the unshare cases would remove the exit followed by init, but I left it blow up if not inited. Signed-off-by: Milton Miller Signed-off-by: Jack Miller Cc: Davidlohr Bueso Cc: Manfred Spraul Cc: Anton Blanchard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ipc/shm.c: increase the defaults for SHMALL, SHMMAX

2014-06-06T23:08:14Z

System V shared memory a) can be abused to trigger out-of-memory conditions and the standard measures against out-of-memory do not work: - it is not possible to use setrlimit to limit the size of shm segments. - segments can exist without association with any processes, thus the oom-killer is unable to free that memory. b) is typically used for shared information - today often multiple GB. (e.g. database shared buffers) The current default is a maximum segment size of 32 MB and a maximum total size of 8 GB. This is often too much for a) and not enough for b), which means that lots of users must change the defaults. This patch increases the default limits (nearly) to the maximum, which is perfect for case b). The defaults are used after boot and as the initial value for each new namespace. Admins/distros that need a protection against a) should reduce the limits and/or enable shm_rmid_forced. Unix has historically required setting these limits for shared memory, and Linux inherited such behavior. The consequence of this is added complexity for users and administrators. One very common example are Database setup/installation documents and scripts, where users must manually calculate the values for these limits. This also requires (some) knowledge of how the underlying memory management works, thus causing, in many occasions, the limits to just be flat out wrong. Disabling these limits sooner could have saved companies a lot of time, headaches and money for support. But it's never too late, simplify users life now. Further notes: - The patch only changes default, overrides behave as before: # sysctl kernel.shmall=33554432 would recreate the previous limit for SHMMAX (for the current namespace). - Disabling sysv shm allocation is possible with: # sysctl kernel.shmall=0 (not a new feature, also per-namespace) - The limits are intentionally set to a value slightly less than ULONG_MAX, to avoid triggering overflows in user space apps. [not unreasonable, see http://marc.info/?l=linux-mm&m=139638334330127] Signed-off-by: Manfred Spraul Signed-off-by: Davidlohr Bueso Reported-by: Davidlohr Bueso Acked-by: Michael Kerrisk Acked-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ipc: whitespace cleanup

2014-01-28T05:02:39Z

The ipc code does not adhere the typical linux coding style. This patch fixes lots of simple whitespace errors. - mostly autogenerated by scripts/checkpatch.pl -f --fix \ --types=pointer_location,spacing,space_before_tab - one manual fixup (keep structure members tab-aligned) - removal of additional space_before_tab that were not found by --fix Tested with some of my msg and sem test apps. Andrew: Could you include it in -mm and move it towards Linus' tree? Signed-off-by: Manfred Spraul Suggested-by: Li Bin Cc: Joe Perches Acked-by: Rafael Aquini Cc: Davidlohr Bueso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds