user/sven/linux.git/include/linux/skbuff.h, branch v3.0.85

netfilter: don't reset nf_trace in nf_reset()

2013-05-01T15:56:37Z

[ Upstream commit 124dff01afbdbff251f0385beca84ba1b9adda68 ] Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code to reset nf_trace in nf_reset(). This is wrong and unnecessary. nf_reset() is used in the following cases: - when passing packets up the the socket layer, at which point we want to release all netfilter references that might keep modules pinned while the packet is queued. nf_trace doesn't matter anymore at this point. - when encapsulating or decapsulating IPsec packets. We want to continue tracing these packets after IPsec processing. - when passing packets through virtual network devices. Only devices on that encapsulate in IPv4/v6 matter since otherwise nf_trace is not used anymore. Its not entirely clear whether those packets should be traced after that, however we've always done that. - when passing packets through virtual network devices that make the packet cross network namespace boundaries. This is the only cases where we clearly want to reset nf_trace and is also what the original patch intended to fix. Add a new function nf_reset_trace() and use it in dev_forward_skb() to fix this properly. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

skb: avoid unnecessary reallocations in __skb_cow

2012-06-09T15:33:03Z

[ Upstream commit 617c8c11236716dcbda877e764b7bf37c6fd8063 ] At the beginning of __skb_cow, headroom gets set to a minimum of NET_SKB_PAD. This causes unnecessary reallocations if the buffer was not cloned and the headroom is just below NET_SKB_PAD, but still more than the amount requested by the caller. This was showing up frequently in my tests on VLAN tx, where vlan_insert_tag calls skb_cow_head(skb, VLAN_HLEN). Locally generated packets should have enough headroom, and for forward paths, we already have NET_SKB_PAD bytes of headroom, so we don't need to add any extra space here. Signed-off-by: Felix Fietkau Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipsec: be careful of non existing mac headers

2012-03-19T15:57:45Z

[ Upstream commit 03606895cd98c0a628b17324fd7b5ff15db7e3cd ] Niccolo Belli reported ipsec crashes in case we handle a frame without mac header (atm in his case) Before copying mac header, better make sure it is present. Bugzilla reference: https://bugzilla.kernel.org/show_bug.cgi?id=42809 Reported-by: Niccolò Belli Tested-by: Niccolò Belli Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: hold sock reference while processing tx timestamps

2011-11-11T17:35:52Z

commit da92b194cc36b5dc1fbd85206aeeffd80bee0c39 upstream. The pair of functions, * skb_clone_tx_timestamp() * skb_complete_tx_timestamp() were designed to allow timestamping in PHY devices. The first function, called during the MAC driver's hard_xmit method, identifies PTP protocol packets, clones them, and gives them to the PHY device driver. The PHY driver may hold onto the packet and deliver it at a later time using the second function, which adds the packet to the socket's error queue. As pointed out by Johannes, nothing prevents the socket from disappearing while the cloned packet is sitting in the PHY driver awaiting a timestamp. This patch fixes the issue by taking a reference on the socket for each such packet. In addition, the comments regarding the usage of these function are expanded to highlight the rule that PHY drivers must use skb_complete_tx_timestamp() to release the packet, in order to release the socket reference, too. These functions first appeared in v2.6.36. Reported-by: Johannes Berg Signed-off-by: Richard Cochran Signed-off-by: Eric Dumazet Reviewed-by: Johannes Berg Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check

2011-06-11T23:15:50Z

Testing of VLAN_FLAG_REORDER_HDR does not belong in vlan_untag but rather in vlan_do_receive. Otherwise the vlan header will not be properly put on the packet in the case of vlan header accelleration. As we remove the check from vlan_check_reorder_header rename it vlan_reorder_header to keep the naming clean. Fix up the skb->pkt_type early so we don't look at the packet after adding the vlan tag, which guarantees we don't goof and look at the wrong field. Use a simple if statement instead of a complicated switch statement to decided that we need to increment rx_stats for a multicast packet. Hopefully at somepoint we will just declare the case where VLAN_FLAG_REORDER_HDR is cleared as unsupported and remove the code. Until then this keeps it working correctly. Signed-off-by: Eric W. Biederman Signed-off-by: Jiri Pirko Acked-by: Changli Gao Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

2011-05-23T15:39:24Z

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) bnx2x: allow device properly initialize after hotplug bnx2x: fix DMAE timeout according to hw specifications bnx2x: properly handle CFC DEL in cnic flow bnx2x: call dev_kfree_skb_any instead of dev_kfree_skb net: filter: move forward declarations to avoid compile warnings pktgen: refactor pg_init() code pktgen: use vzalloc_node() instead of vmalloc_node() + memset() net: skb_trim explicitely check the linearity instead of data_len ipv4: Give backtrace in ip_rt_bug(). net: avoid synchronize_rcu() in dev_deactivate_many net: remove synchronize_net() from netdev_set_master() rtnetlink: ignore NETDEV_RELEASE and NETDEV_JOIN event net: rename NETDEV_BONDING_DESLAVE to NETDEV_RELEASE bridge: call NETDEV_JOIN notifiers when add a slave netpoll: disable netpoll when enslave a device macvlan: Forward unicast frames in bridge mode to lowerdev net: Remove linux/prefetch.h include from linux/skbuff.h ipv4: Include linux/prefetch.h in fib_trie.c netlabel: Remove prefetches from list handlers. drivers/net: add prefetch header for prefetch users ... Fixed up prefetch parts: removed a few duplicate prefetch.h includes, fixed the location of the igb prefetch.h, took my version of the skbuff.h code without the extra parentheses etc.

Remove prefetch() from and "netlabel_addrlist.h"

2011-05-23T04:43:41Z

Commit e66eed651fd1 ("list: remove prefetching from regular list iterators") removed the include of prefetch.h from list.h. The skbuff list traversal still had them. Quoth David Miller: "Please just remove the prefetches. Those are modelled after list.h as I intend to eventually convert SKB list handling to "struct list_head" but we're not there yet. Therefore if we kill prefetches from list.h we should kill it from these things in skbuff.h too." Requested-by: David Miller Signed-off-by: Linus Torvalds

net: skb_trim explicitely check the linearity instead of data_len

2011-05-23T01:01:21Z

The purpose of the check on data_len is to check linearity, so use the inline helper for this. No overhead and more explicit. Signed-off-by: Emmanuel Grumbach Signed-off-by: David S. Miller

net: Remove linux/prefetch.h include from linux/skbuff.h

2011-05-23T00:54:11Z

No longer needed. Signed-off-by: David S. Miller

net: Remove prefetches from SKB list handlers.

2011-05-23T00:35:29Z

Noticed by Linus. Signed-off-by: David S. Miller