user/sven/linux.git/include/linux/smp.h, branch v6.9.9

Merge tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-03-12T02:37:56Z

Pull x86 cleanups from Ingo Molnar: "Misc cleanups, including a large series from Thomas Gleixner to cure sparse warnings" * tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi: Drop unused declaration of proc_nmi_enabled() x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address() x86/percpu: Cure per CPU madness on UP smp: Consolidate smp_prepare_boot_cpu() x86/msr: Add missing __percpu annotations x86/msr: Prepare for including into perf/x86/amd/uncore: Fix __percpu annotation x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP) x86/apm_32: Remove dead function apm_get_battery_status() x86/insn-eval: Fix function param name in get_eff_addr_sib()

Merge tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-03-11T22:45:55Z

Pull x86 APIC updates from Thomas Gleixner: "Rework of APIC enumeration and topology evaluation. The current implementation has a couple of shortcomings: - It fails to handle hybrid systems correctly. - The APIC registration code which handles CPU number assignents is in the middle of the APIC code and detached from the topology evaluation. - The various mechanisms which enumerate APICs, ACPI, MPPARSE and guest specific ones, tweak global variables as they see fit or in case of XENPV just hack around the generic mechanisms completely. - The CPUID topology evaluation code is sprinkled all over the vendor code and reevaluates global variables on every hotplug operation. - There is no way to analyze topology on the boot CPU before bringing up the APs. This causes problems for infrastructure like PERF which needs to size certain aspects upfront or could be simplified if that would be possible. - The APIC admission and CPU number association logic is incomprehensible and overly complex and needs to be kept around after boot instead of completing this right after the APIC enumeration. This update addresses these shortcomings with the following changes: - Rework the CPUID evaluation code so it is common for all vendors and provides information about the APIC ID segments in a uniform way independent of the number of segments (Thread, Core, Module, ..., Die, Package) so that this information can be computed instead of rewriting global variables of dubious value over and over. - A few cleanups and simplifcations of the APIC, IO/APIC and related interfaces to prepare for the topology evaluation changes. - Seperation of the parser stages so the early evaluation which tries to find the APIC address can be seperately overridden from the late evaluation which enumerates and registers the local APIC as further preparation for sanitizing the topology evaluation. - A new registration and admission logic which - encapsulates the inner workings so that parsers and guest logic cannot longer fiddle in it - uses the APIC ID segments to build topology bitmaps at registration time - provides a sane admission logic - allows to detect the crash kernel case, where CPU0 does not run on the real BSP, automatically. This is required to prevent sending INIT/SIPI sequences to the real BSP which would reset the whole machine. This was so far handled by a tedious command line parameter, which does not even work in nested crash scenarios. - Associates CPU number after the enumeration completed and prevents the late registration of APICs, which was somehow tolerated before. - Converting all parsers and guest enumeration mechanisms over to the new interfaces. This allows to get rid of all global variable tweaking from the parsers and enumeration mechanisms and sanitizes the XEN[PV] handling so it can use CPUID evaluation for the first time. - Mopping up existing sins by taking the information from the APIC ID segment bitmaps. This evaluates hybrid systems correctly on the boot CPU and allows for cleanups and fixes in the related drivers, e.g. PERF. The series has been extensively tested and the minimal late fallout due to a broken ACPI/MADT table has been addressed by tightening the admission logic further" * tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits) x86/topology: Ignore non-present APIC IDs in a present package x86/apic: Build the x86 topology enumeration functions on UP APIC builds too smp: Provide 'setup_max_cpus' definition on UP too smp: Avoid 'setup_max_cpus' namespace collision/shadowing x86/bugs: Use fixed addressing for VERW operand x86/cpu/topology: Get rid of cpuinfo::x86_max_cores x86/cpu/topology: Provide __num_[cores|threads]_per_package x86/cpu/topology: Rename topology_max_die_per_package() x86/cpu/topology: Rename smp_num_siblings x86/cpu/topology: Retrieve cores per package from topology bitmaps x86/cpu/topology: Use topology logical mapping mechanism x86/cpu/topology: Provide logical pkg/die mapping x86/cpu/topology: Simplify cpu_mark_primary_thread() x86/cpu/topology: Mop up primary thread mask handling x86/cpu/topology: Use topology bitmaps for sizing x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT x86/xen/smp_pv: Count number of vCPUs early x86/cpu/topology: Assign hotpluggable CPUIDs during init x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug x86/topology: Add a mechanism to track topology via APIC IDs ...

smp: Consolidate smp_prepare_boot_cpu()

2024-03-04T11:01:54Z

There is no point in having seven architectures implementing the same empty stub. Provide a weak function in the init code and remove the stubs. This also allows to utilize the function on UP which is required to sanitize the per CPU handling on X86 UP. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/20240304005104.567671691@linutronix.de

smp: Provide 'setup_max_cpus' definition on UP too

2024-02-27T09:05:41Z

This was already defined locally by init/main.c, but let's make it generic, as arch/x86/kernel/cpu/topology.c is going to make use of it to have more uniform code. Reviewed-by: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

smp: Make __smp_processor_id() 0-argument macro

2024-02-19T17:05:47Z

smp_processor_id family of macros never accepted any arguments. #define __smp_processor_id(x) works by accident (see C99 6.10.3 §4). __smp_processor_id() gets 1 (empty) argument and passes it down to raw_smp_processor_id() which doesn't accept arguments. Signed-off-by: Alexey Dobriyan Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/0037d1f2-8153-4b33-b43e-f4b6ecd710ac@p183

smp: Change function signatures to use call_single_data_t

2023-09-13T12:59:24Z

call_single_data_t is a size-aligned typedef of struct __call_single_data. This alignment is desirable in order to have smp_call_function*() avoid bouncing an extra cacheline in case of an unaligned csd, given this would hurt performance. Since the removal of struct request->csd in commit 660e802c76c8 ("blk-mq: use percpu csd to remote complete instead of per-rq csd") there are no current users of smp_call_function*() with unaligned csd. Change every 'struct __call_single_data' function parameter to 'call_single_data_t', so we have warnings if any new code tries to introduce an smp_call_function*() call with unaligned csd. Signed-off-by: Leonardo Bras Reviewed-by: Guo Ren Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/20230831063129.335425-1-leobras@redhat.com

Merge tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2023-04-28T22:03:43Z

Pull SMP cross-CPU function-call updates from Ingo Molnar: - Remove diagnostics and adjust config for CSD lock diagnostics - Add a generic IPI-sending tracepoint, as currently there's no easy way to instrument IPI origins: it's arch dependent and for some major architectures it's not even consistently available. * tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: trace,smp: Trace all smp_function_call*() invocations trace: Add trace_ipi_send_cpu() sched, smp: Trace smp callback causing an IPI smp: reword smp call IPI comment treewide: Trace IPIs sent via smp_send_reschedule() irq_work: Trace self-IPIs sent via arch_irq_work_raise() smp: Trace IPIs sent via arch_send_call_function_ipi_mask() sched, smp: Trace IPIs sent via send_call_function_single_ipi() trace: Add trace_ipi_send_cpumask() kernel/smp: Make csdlock_debug= resettable locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging locking/csd_lock: Remove added data from CSD lock debugging locking/csd_lock: Add Kconfig option for csd_debug default

cpu: Mark nmi_panic_self_stop() __noreturn

2023-04-14T15:31:26Z

In preparation for improving objtool's handling of weak noreturn functions, mark nmi_panic_self_stop() __noreturn. Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/316fc6dfab5a8c4e024c7185484a1ee5fb0afb79.1681342859.git.jpoimboe@kernel.org

cpu: Mark panic_smp_self_stop() __noreturn

2023-04-14T15:31:25Z

In preparation for improving objtool's handling of weak noreturn functions, mark panic_smp_self_stop() __noreturn. Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/92d76ab5c8bf660f04fdcd3da1084519212de248.1681342859.git.jpoimboe@kernel.org

trace: Add trace_ipi_send_cpu()

2023-03-24T10:01:29Z

Because copying cpumasks around when targeting a single CPU is a bit daft... Tested-and-reviewed-by: Valentin Schneider Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20230322103004.GA571242%40hirez.programming.kicks-ass.net