user/sven/linux.git/include/linux/soc, branch v4.9.128

soc: qcom: smd: Represent smd edges as devices

2016-08-23T20:46:33Z

By representing each edge as its own device the channels are no longer tied to being parented by the same smd device and as such an edge can live as children of e.g. remoteproc instances. Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross

soc: qcom: smd: Simplify multi channel handling

2016-08-23T20:46:32Z

Multi-channel clients split between several drivers need a way to close individual channels, as these drivers might be removed individually. With this in place the responsibility of closing additionally opened channels to the client as well only concerning smd about the primary channel. With this approach we will only trigger removal of SMD devices based on the state of the primary channel, however we get in sync with how rpmsg works. Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross

soc: qcom: smd: Correct compile stub prototypes

2016-08-23T20:46:32Z

The prototypes for the compile stubs was not properly marked as static inline, this patch corrects this. Fixes: f79a917e69e1 ("Merge tag 'qcom-soc-for-4.7-2' into net-next") Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross

Merge tag 'renesas-rcar-sysc2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

2016-07-07T05:12:04Z

Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8 * Prepare for handling SYSC interrupt configuration purely from DT in the rcar-sysc driver for new SoCs, while preserving backward compatibility with old DTBs for R-Car H1, H2, and M2-W * Add R8A7792 support * tag 'renesas-rcar-sysc2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver soc: renesas: rcar-sysc: Make rcar_sysc_init() init the PM domains soc: renesas: rcar-sysc: Fix uninitialized error code in rcar_sysc_pd_init() soc: renesas: rcar-sysc: add R8A7792 support Signed-off-by: Olof Johansson

soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver

2016-06-29T12:37:08Z

On R-Car H1 and Gen2, the SYSC interrupt registers are always configured using hardcoded values in platform code. For R-Car Gen2, values are provided for H2 and M2-W only, other SoCs are not yet supported, and never will be. Move this configuration from SoC-specific platform code to the rcar_sysc_init() wrapper, so it can be skipped if the SYSC is configured from DT. This would be the case not only for H1, H2, and M2-W using a modern DTS, but also for other R-Car Gen2 SoCs not supported by the platform code, relying purely on DT. There is no longer a need to return the mapped register block, hence make the function return void. Signed-off-by: Geert Uytterhoeven Reviewed-by: Ulrich Hecht Signed-off-by: Simon Horman

soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components

2016-06-24T18:34:00Z

We need the signal from wcnss_ctrl indicating that the firmware is up and running before we can communicate with the other components of the chip. So make these other components children of the wcnss_ctrl device, so they can be probed in order. The process seems to take between 1/2-5 seconds, so this is done in a worker, instead of holding up the probe. Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-05-18T20:14:02Z

Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...

Merge tag 'qcom-soc-for-4.7-2' into net-next

2016-05-13T21:42:23Z

This merges the Qualcomm SOC tree with the net-next, solving the merge conflict in the SMD API between the two. Signed-off-by: Bjorn Andersson

soc: qcom: smd: Introduce compile stubs

2016-05-09T03:46:14Z

Introduce compile stubs for the SMD API, allowing consumers to be compile tested. Acked-by: Andy Gross Signed-off-by: Bjorn Andersson Signed-off-by: David S. Miller

Merge tag 'renesas-rcar-sysc2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

2016-04-26T08:21:57Z

Merge "Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.7" from Simon Horman: Introduce a DT-based driver for the R-Car System Controller, as found on Renesas R-Car H1, R-Car Gen2, and R-Car Gen3 SoCs. * tag 'renesas-rcar-sysc2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (30 commits) soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas soc: renesas: rcar-sysc: Add support for R-Car H1 power areas soc: renesas: rcar-sysc: Enable Clock Domain for I/O devices soc: renesas: rcar-sysc: Make rcar_sysc_power_is_off() static soc: renesas: rcar-sysc: Add DT support for SYSC PM domains soc: renesas: rcar-sysc: Improve rcar_sysc_power() debug info soc: renesas: Move pm-rcar to drivers/soc/renesas/rcar-sysc clk: renesas: cpg-mssr: Export cpg_mssr_{at,de}tach_dev() clk: renesas: mstp: Provide dummy attach/detach_dev callbacks clk: renesas: Provide Kconfig symbols for CPG/MSSR and CPG/MSTP support soc: renesas: Add r8a7795 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7794 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7793 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7791 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7790 SYSC PM Domain Binding Definitions soc: renesas: Add r8a7779 SYSC PM Domain Binding Definitions ...