user/sven/linux.git/include/linux/srcu.h, branch v6.2.7

rcu: Make SRCU mandatory

2022-11-29T23:00:06Z

Kernels configured with CONFIG_PRINTK=n and CONFIG_SRCU=n get build failures. This causes trouble for deep embedded systems. But given that there are more than 25 instances of "select SRCU" in the kernel, it is hard to believe that there are many kernels running in production without SRCU. This commit therefore makes SRCU mandatory. The SRCU Kconfig option remains for backwards compatibility, and will be removed when it is no longer used. [ paulmck: Update per kernel test robot feedback. ] Reported-by: John Ogness Reported-by: Petr Mladek Signed-off-by: Paul E. McKenney Cc: Acked-by: Randy Dunlap # build-tested Reviewed-by: John Ogness

srcu: Debug NMI safety even on archs that don't require it

2022-10-21T17:44:11Z

Currently the NMI safety debugging is only performed on architectures that don't support NMI-safe this_cpu_inc(). Reorder the code so that other architectures like x86 also detect bad uses. [ paulmck: Apply kernel test robot, Stephen Rothwell, and Zqiang feedback. ] Signed-off-by: Frederic Weisbecker Signed-off-by: Paul E. McKenney

srcu: Check for consistent per-CPU per-srcu_struct NMI safety

2022-10-20T22:02:15Z

This commit adds runtime checks to verify that a given srcu_struct uses consistent NMI-safe (or not) read-side primitives on a per-CPU basis. Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/ Signed-off-by: Paul E. McKenney Reviewed-by: Frederic Weisbecker Cc: Thomas Gleixner Cc: John Ogness Cc: Petr Mladek

srcu: Create an srcu_read_lock_nmisafe() and srcu_read_unlock_nmisafe()

2022-10-20T21:39:18Z

On strict load-store architectures, the use of this_cpu_inc() by srcu_read_lock() and srcu_read_unlock() is not NMI-safe in TREE SRCU. To see this suppose that an NMI arrives in the middle of srcu_read_lock(), just after it has read ->srcu_lock_count, but before it has written the incremented value back to memory. If that NMI handler also does srcu_read_lock() and srcu_read_lock() on that same srcu_struct structure, then upon return from that NMI handler, the interrupted srcu_read_lock() will overwrite the NMI handler's update to ->srcu_lock_count, but leave unchanged the NMI handler's update by srcu_read_unlock() to ->srcu_unlock_count. This can result in a too-short SRCU grace period, which can in turn result in arbitrary memory corruption. If the NMI handler instead interrupts the srcu_read_unlock(), this can result in eternal SRCU grace periods, which is not much better. This commit therefore creates a pair of new srcu_read_lock_nmisafe() and srcu_read_unlock_nmisafe() functions, which allow SRCU readers in both NMI handlers and in process and IRQ context. It is bad practice to mix the existing and the new _nmisafe() primitives on the same srcu_struct structure. Use one set or the other, not both. Just to underline that "bad practice" point, using srcu_read_lock() at process level and srcu_read_lock_nmisafe() in your NMI handler will not, repeat NOT, work. If you do not immediately understand why this is the case, please review the earlier paragraphs in this commit log. [ paulmck: Apply kernel test robot feedback. ] [ paulmck: Apply feedback from Randy Dunlap. ] [ paulmck: Apply feedback from John Ogness. ] [ paulmck: Apply feedback from Frederic Weisbecker. ] Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/ Signed-off-by: Paul E. McKenney Acked-by: Randy Dunlap # build-tested Reviewed-by: Frederic Weisbecker Cc: Thomas Gleixner Cc: John Ogness Cc: Petr Mladek

rcu: Replace __p1 and _p1 with UNIQUE_ID(rcu)

2021-12-01T01:25:20Z

This commit replaces both ________p1 and _________p1 with __UNIQUE_ID(rcu), and also adjusts the callers of the affected macros. __UNIQUE_ID(rcu) will generate unique variable names during compilation, which eliminates the need of ________p1 and _________p1 (both having 4 occurrences prior to the code change). This also avoids the variable name shadowing issue, or at least makes those wishing to cause shadowing problems work much harder to do so. The same idea is used for the min/max macros (commit 589a978 and commit e9092d0). Signed-off-by: Jim Huang Signed-off-by: Chun-Hung Tseng Signed-off-by: Paul E. McKenney

srcu: Initialize SRCU after timers

2021-05-10T23:03:35Z

Once srcu_init() is called, the SRCU core will make use of delayed workqueues, which rely on timers. However init_timers() is called several steps after rcu_init(). This means that a call_srcu() after rcu_init() but before init_timers() would find itself within a dangerously uninitialized timer core. This commit therefore creates a separate call to srcu_init() after init_timer() completes, which ensures that we stay in early SRCU mode until timers are safe(r). Signed-off-by: Frederic Weisbecker Cc: Uladzislau Rezki Cc: Boqun Feng Cc: Lai Jiangshan Cc: Neeraj Upadhyay Cc: Josh Triplett Cc: Joel Fernandes Signed-off-by: Paul E. McKenney

srcu: Provide polling interfaces for Tiny SRCU grace periods

2021-01-04T21:53:38Z

There is a need for a polling interface for SRCU grace periods, so this commit supplies get_state_synchronize_srcu(), start_poll_synchronize_srcu(), and poll_state_synchronize_srcu() for this purpose. The first can be used if future grace periods are inevitable (perhaps due to a later call_srcu() invocation), the second if future grace periods might not otherwise happen, and the third to check if a grace period has elapsed since the corresponding call to either of the first two. As with get_state_synchronize_rcu() and cond_synchronize_rcu(), the return value from either get_state_synchronize_srcu() or start_poll_synchronize_srcu() must be passed in to a later call to poll_state_synchronize_srcu(). Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/ Reported-by: Kent Overstreet [ paulmck: Add EXPORT_SYMBOL_GPL() per kernel test robot feedback. ] [ paulmck: Apply feedback from Neeraj Upadhyay. ] Link: https://lore.kernel.org/lkml/20201117004017.GA7444@paulmck-ThinkPad-P72/ Reviewed-by: Neeraj Upadhyay Signed-off-by: Paul E. McKenney

srcu: Remove cleanup_srcu_struct_quiesced()

2019-03-26T21:39:24Z

The cleanup_srcu_struct_quiesced() function was added because NVME used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that NVME workqueues waiting on SRCU workqueues could result in deadlocks during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM workqueues, so there is no longer a potential for deadlock. Furthermore, it turns out to be extremely hard to use cleanup_srcu_struct_quiesced() correctly due to the fact that SRCU callback invocation accesses the srcu_struct structure's per-CPU data area just after callbacks are invoked. Therefore, the usual practice of using srcu_barrier() to wait for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced() fails because SRCU's callback-invocation workqueue handler might be delayed, which can result in cleanup_srcu_struct_quiesced() being invoked (and thus freeing the per-CPU data) before the SRCU's callback-invocation workqueue handler is finished using that per-CPU data. Nor is this a theoretical problem: KASAN emitted use-after-free warnings because of this problem on actual runs. In short, NVME can now safely invoke cleanup_srcu_struct(), which avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced() is quite difficult to use safely. This commit therefore removes cleanup_srcu_struct_quiesced(), switching its sole user back to cleanup_srcu_struct(). This effectively reverts the following pair of commits: f7194ac32ca2 ("srcu: Add cleanup_srcu_struct_quiesced()") 4317228ad9b8 ("nvme: Avoid flush dependency in delete controller flow") Reported-by: Bart Van Assche Signed-off-by: Paul E. McKenney Reviewed-by: Bart Van Assche Tested-by: Bart Van Assche

Merge branches 'doc.2019.01.26a', 'fixes.2019.01.26a', 'sil.2019.01.26a', 'spdx.2019.02.09a', 'srcu.2019.01.26a' and 'torture.2019.01.26a' into HEAD

2019-02-09T16:47:52Z

doc.2019.01.26a: Documentation updates. fixes.2019.01.26a: Miscellaneous fixes. sil.2019.01.26a: Removal of a few more spin_is_locked() instances. spdx.2019.02.09a: Add SPDX identifiers to RCU files srcu.2019.01.26a: SRCU updates. torture.2019.01.26a: Torture-test updates.

linux/srcu: Convert to SPDX license identifier

2019-02-09T16:45:59Z

Replace the license boiler plate with a SPDX license identifier. While in the area, update an email address. Signed-off-by: Paul E. McKenney [ paulmck: Update ,h SPDX format per Joe Perches. ] Reviewed-by: Thomas Gleixner