user/sven/linux.git/include/linux/suspend.h, branch v3.2.65

PM / VT: Cleanup #if defined uglyness and fix compile error

2011-10-16T21:28:51Z

Introduce the config option CONFIG_VT_CONSOLE_SLEEP in order to cleanup the #if defined ugliness for the vt suspend support functions. Note that CONFIG_VT_CONSOLE is already dependant on CONFIG_VT. The function pm_set_vt_switch is actually dependant on CONFIG_VT and not CONFIG_PM_SLEEP. This fixes a compile error when CONFIG_PM_SLEEP is not set: drivers/tty/vt/vt_ioctl.c:1794: error: redefinition of 'pm_set_vt_switch' include/linux/suspend.h:17: error: previous definition of 'pm_set_vt_switch' was here Also, remove the incorrect path from the comment in console.c. [rjw: Replaced #if defined() with #ifdef in suspend.h.] Signed-off-by: H Hartley Sweeten Acked-by: Arnd Bergmann Signed-off-by: Rafael J. Wysocki

PM / Hibernate: Include storage keys in hibernation image on s390

2011-10-16T21:27:46Z

For s390 there is one additional byte associated with each page, the storage key. This byte contains the referenced and changed bits and needs to be included into the hibernation image. If the storage keys are not restored to their previous state all original pages would appear to be dirty. This can cause inconsistencies e.g. with read-only filesystems. Signed-off-by: Martin Schwidefsky Signed-off-by: Rafael J. Wysocki

PM / Suspend: Add statistics debugfs file for suspend to RAM

2011-10-16T21:27:45Z

Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu Signed-off-by: Rafael J. Wysocki

notifiers: pm: move pm notifiers into suspend.h

2011-07-26T03:57:15Z

It is not necessary to share the same notifier.h. Signed-off-by: WANG Cong Cc: David Miller Acked-by: "Rafael J. Wysocki" Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

PM / Suspend: Add .suspend_again() callback to suspend_ops

2011-07-15T21:58:19Z

A system or a device may need to control suspend/wakeup events. It may want to wakeup the system after a predefined amount of time or at a predefined event decided while entering suspend for polling or delayed work. Then, it may want to enter suspend again if its predefined wakeup condition is the only wakeup reason and there is no outstanding events; thus, it does not wakeup the userspace unnecessary or unnecessary devices and keeps suspended as long as possible (saving the power). Enabling a system to wakeup after a specified time can be easily achieved by using RTC. However, to enter suspend again immediately without invoking userland and unrelated devices, we need additional features in the suspend framework. Such need comes from: 1. Monitoring a critical device status without interrupts that can wakeup the system. (in-suspend polling) An example is ambient temperature monitoring that needs to shut down the system or a specific device function if it is too hot or cold. The temperature of a specific device may be needed to be monitored as well; e.g., a charger monitors battery temperature in order to stop charging if overheated. 2. Execute critical "delayed work" at suspend. A driver or a system/board may have a delayed work (or any similar things) that it wants to execute at the requested time. For example, some chargers want to check the battery voltage some time (e.g., 30 seconds) after the battery is fully charged and the charger has stopped. Then, the charger restarts charging if the voltage has dropped more than a threshold, which is smaller than "restart-charger" voltage, which is a threshold to restart charging regardless of the time passed. This patch allows to add "suspend_again" callback at struct platform_suspend_ops and let the "suspend_again" callback return true if the system is required to enter suspend again after the current instance of wakeup. Device-wise suspend_again implemented at dev_pm_ops or syscore is not done because: a) suspend_again feature is usually under platform-wise decision and controls the behavior of the whole platform and b) There are very limited devices related to the usage cases of suspend_again; chargers and temperature sensors are mentioned so far. With suspend_again callback registered at struct platform_suspend_ops suspend_ops in kernel/power/suspend.c with suspend_set_ops by the platform, the suspend framework tries to enter suspend again by looping suspend_enter() if suspend_again has returned true and there has been no errors in the suspending sequence or pending wakeups (by pm_wakeup_pending). Tested at Exynos4-NURI. [rjw: Fixed up kerneldoc comment for suspend_enter().] Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS

2011-04-11T20:54:42Z

Xen save/restore is going to use hibernate device callbacks for quiescing devices and putting them back to normal operations and it would need to select CONFIG_HIBERNATION for this purpose. However, that also would cause the hibernate interfaces for user space to be enabled, which might confuse user space, because the Xen kernels don't support hibernation. Moreover, it would be wasteful, as it would make the Xen kernels include a substantial amount of code that they would never use. To address this issue introduce new power management Kconfig option CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code that is necessary for the hibernate device callbacks to work and make CONFIG_HIBERNATION select it. Then, Xen save/restore will be able to select CONFIG_HIBERNATE_CALLBACKS without dragging the entire hibernate code along with it. Signed-off-by: Rafael J. Wysocki Tested-by: Shriram Rajagopalan

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

2011-01-14T04:15:35Z

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits) ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework ACPI: fix resource check message ACPI / Battery: Update information on info notification and resume ACPI: Drop device flag wake_capable ACPI: Always check if _PRW is present before trying to evaluate it ACPI / PM: Check status of power resources under mutexes ACPI / PM: Rename acpi_power_off_device() ACPI / PM: Drop acpi_power_nocheck ACPI / PM: Drop acpi_bus_get_power() Platform / x86: Make fujitsu_laptop use acpi_bus_update_power() ACPI / Fan: Rework the handling of power resources ACPI / PM: Register power resource devices as soon as they are needed ACPI / PM: Register acpi_power_driver early ACPI / PM: Add function for updating device power state consistently ACPI / PM: Add function for device power state initialization ACPI / PM: Introduce __acpi_bus_get_power() ACPI / PM: Introduce function for refcounting device power resources ACPI / PM: Add functions for manipulating lists of power resources ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes ACPICA: Update version to 20101209 ...

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2011-01-13T18:05:56Z

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.

PM / ACPI: Move NVS saving and restoring code to drivers/acpi

2011-01-07T05:36:55Z

The saving of the ACPI NVS area during hibernation and suspend and restoring it during the subsequent resume is entirely specific to ACPI, so move it to drivers/acpi and drop the CONFIG_SUSPEND_NVS configuration option which is redundant. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown

PM: Fix oops in suspend/hibernate code related to failing ioremap()

2011-01-07T05:26:45Z

When ioremap() fails (which might happen for some reason), we nicely oops in suspend_nvs_save() due to NULL dereference by memcpy() in there. Fail gracefully instead. Signed-off-by: Jiri Slaby Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown