user/sven/linux.git/include/linux/swapops.h, branch v6.1.23

mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit

2022-12-10T02:41:16Z

We use "unsigned long" to store a PFN in the kernel and phys_addr_t to store a physical address. On a 64bit system, both are 64bit wide. However, on a 32bit system, the latter might be 64bit wide. This is, for example, the case on x86 with PAE: phys_addr_t and PTEs are 64bit wide, while "unsigned long" only spans 32bit. The current definition of SWP_PFN_BITS without MAX_PHYSMEM_BITS misses that case, and assumes that the maximum PFN is limited by an 32bit phys_addr_t. This implies, that SWP_PFN_BITS will currently only be able to cover 4 GiB - 1 on any 32bit system with 4k page size, which is wrong. Let's rely on the number of bits in phys_addr_t instead, but make sure to not exceed the maximum swap offset, to not make the BUILD_BUG_ON() in is_pfn_swap_entry() unhappy. Note that swp_entry_t is effectively an unsigned long and the maximum swap offset shares that value with the swap type. For example, on an 8 GiB x86 PAE system with a kernel config based on Debian 11.5 (-> CONFIG_FLATMEM=y, CONFIG_X86_PAE=y), we will currently fail removing migration entries (remove_migration_ptes()), because mm/page_vma_mapped.c:check_pte() will fail to identify a PFN match as swp_offset_pfn() wrongly masks off PFN bits. For example, split_huge_page_to_list()->...->remap_page() will leave migration entries in place and continue to unlock the page. Later, when we stumble over these migration entries (e.g., via /proc/self/pagemap), pfn_swap_entry_to_page() will BUG_ON() because these migration entries shouldn't exist anymore and the page was unlocked. [ 33.067591] kernel BUG at include/linux/swapops.h:497! [ 33.067597] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 33.067602] CPU: 3 PID: 742 Comm: cow Tainted: G E 6.1.0-rc8+ #16 [ 33.067605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 [ 33.067606] EIP: pagemap_pmd_range+0x644/0x650 [ 33.067612] Code: 00 00 00 00 66 90 89 ce b9 00 f0 ff ff e9 ff fb ff ff 89 d8 31 db e8 48 c6 52 00 e9 23 fb ff ff e8 61 83 56 00 e9 b6 fe ff ff <0f> 0b bf 00 f0 ff ff e9 38 fa ff ff 3e 8d 74 26 00 55 89 e5 57 31 [ 33.067615] EAX: ee394000 EBX: 00000002 ECX: ee394000 EDX: 00000000 [ 33.067617] ESI: c1b0ded4 EDI: 00024a00 EBP: c1b0ddb4 ESP: c1b0dd68 [ 33.067619] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010246 [ 33.067624] CR0: 80050033 CR2: b7a00000 CR3: 01bbbd20 CR4: 00350ef0 [ 33.067625] Call Trace: [ 33.067628] ? madvise_free_pte_range+0x720/0x720 [ 33.067632] ? smaps_pte_range+0x4b0/0x4b0 [ 33.067634] walk_pgd_range+0x325/0x720 [ 33.067637] ? mt_find+0x1d6/0x3a0 [ 33.067641] ? mt_find+0x1d6/0x3a0 [ 33.067643] __walk_page_range+0x164/0x170 [ 33.067646] walk_page_range+0xf9/0x170 [ 33.067648] ? __kmem_cache_alloc_node+0x2a8/0x340 [ 33.067653] pagemap_read+0x124/0x280 [ 33.067658] ? default_llseek+0x101/0x160 [ 33.067662] ? smaps_account+0x1d0/0x1d0 [ 33.067664] vfs_read+0x90/0x290 [ 33.067667] ? do_madvise.part.0+0x24b/0x390 [ 33.067669] ? debug_smp_processor_id+0x12/0x20 [ 33.067673] ksys_pread64+0x58/0x90 [ 33.067675] __ia32_sys_ia32_pread64+0x1b/0x20 [ 33.067680] __do_fast_syscall_32+0x4c/0xc0 [ 33.067683] do_fast_syscall_32+0x29/0x60 [ 33.067686] do_SYSENTER_32+0x15/0x20 [ 33.067689] entry_SYSENTER_32+0x98/0xf1 Decrease the indentation level of SWP_PFN_BITS and SWP_PFN_MASK to keep it readable and consistent. [david@redhat.com: rely on sizeof(phys_addr_t) and min_t() instead] Link: https://lkml.kernel.org/r/20221206105737.69478-1-david@redhat.com [david@redhat.com: use "int" for comparison, as we're only comparing numbers < 64] Link: https://lkml.kernel.org/r/1f157500-2676-7cef-a84e-9224ed64e540@redhat.com Link: https://lkml.kernel.org/r/20221205150857.167583-1-david@redhat.com Fixes: 0d206b5d2e0d ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry") Signed-off-by: David Hildenbrand Acked-by: Peter Xu Reviewed-by: Yang Shi Cc: Hugh Dickins Cc: Andrea Arcangeli Signed-off-by: Andrew Morton

mm/swap: cache swap migration A/D bits support

2022-09-27T02:46:05Z

Introduce a variable swap_migration_ad_supported to cache whether the arch supports swap migration A/D bits. Here one thing to mention is that SWP_MIG_TOTAL_BITS will internally reference the other macro MAX_PHYSMEM_BITS, which is a function call on x86 (constant on all the rest of archs). It's safe to reference it in swapfile_init() because when reaching here we're already during initcalls level 4 so we must have initialized 5-level pgtable for x86_64 (right after early_identify_cpu() finishes). - start_kernel - setup_arch - early_cpu_init - get_cpu_cap --> fetch from CPUID (including X86_FEATURE_LA57) - early_identify_cpu --> clear X86_FEATURE_LA57 (if early lvl5 not enabled (USE_EARLY_PGTABLE_L5)) - arch_call_rest_init - rest_init - kernel_init - kernel_init_freeable - do_basic_setup - do_initcalls --> calls swapfile_init() (initcall level 4) This should slightly speed up the migration swap entry handlings. Link: https://lkml.kernel.org/r/20220811161331.37055-8-peterx@redhat.com Signed-off-by: Peter Xu Cc: Alistair Popple Cc: Andi Kleen Cc: Andrea Arcangeli Cc: David Hildenbrand Cc: Huang Ying Cc: Hugh Dickins Cc: "Kirill A . Shutemov" Cc: Minchan Kim Cc: Nadav Amit Cc: Vlastimil Babka Cc: Dave Hansen Signed-off-by: Andrew Morton

mm/swap: cache maximum swapfile size when init swap

2022-09-27T02:46:05Z

We used to have swapfile_maximum_size() fetching a maximum value of swapfile size per-arch. As the caller of max_swapfile_size() grows, this patch introduce a variable "swapfile_maximum_size" and cache the value of old max_swapfile_size(), so that we don't need to calculate the value every time. Caching the value in swapfile_init() is safe because when reaching the phase we should have initialized all the relevant information. Here the major arch to take care of is x86, which defines the max swapfile size based on L1TF mitigation. Here both X86_BUG_L1TF or l1tf_mitigation should have been setup properly when reaching swapfile_init(). As a reference, the code path looks like this for x86: - start_kernel - setup_arch - early_cpu_init - early_identify_cpu --> setup X86_BUG_L1TF - parse_early_param - l1tf_cmdline --> set l1tf_mitigation - check_bugs - l1tf_select_mitigation --> set l1tf_mitigation - arch_call_rest_init - rest_init - kernel_init - kernel_init_freeable - do_basic_setup - do_initcalls --> calls swapfile_init() (initcall level 4) The swapfile size only depends on swp pte format on non-x86 archs, so caching it is safe too. Since at it, rename max_swapfile_size() to arch_max_swapfile_size() because arch can define its own function, so it's more straightforward to have "arch_" as its prefix. At the meantime, export swapfile_maximum_size to replace the old usages of max_swapfile_size(). [peterx@redhat.com: declare arch_max_swapfile_size) in swapfile.h] Link: https://lkml.kernel.org/r/YxTh1GuC6ro5fKL5@xz-m1.local Link: https://lkml.kernel.org/r/20220811161331.37055-7-peterx@redhat.com Signed-off-by: Peter Xu Reviewed-by: "Huang, Ying" Cc: Alistair Popple Cc: Andi Kleen Cc: Andrea Arcangeli Cc: David Hildenbrand Cc: Hugh Dickins Cc: "Kirill A . Shutemov" Cc: Minchan Kim Cc: Nadav Amit Cc: Vlastimil Babka Cc: Dave Hansen Signed-off-by: Andrew Morton

mm: remember young/dirty bit for page migrations

2022-09-27T02:46:05Z

When page migration happens, we always ignore the young/dirty bit settings in the old pgtable, and marking the page as old in the new page table using either pte_mkold() or pmd_mkold(), and keeping the pte clean. That's fine from functional-wise, but that's not friendly to page reclaim because the moving page can be actively accessed within the procedure. Not to mention hardware setting the young bit can bring quite some overhead on some systems, e.g. x86_64 needs a few hundreds nanoseconds to set the bit. The same slowdown problem to dirty bits when the memory is first written after page migration happened. Actually we can easily remember the A/D bit configuration and recover the information after the page is migrated. To achieve it, define a new set of bits in the migration swap offset field to cache the A/D bits for old pte. Then when removing/recovering the migration entry, we can recover the A/D bits even if the page changed. One thing to mention is that here we used max_swapfile_size() to detect how many swp offset bits we have, and we'll only enable this feature if we know the swp offset is big enough to store both the PFN value and the A/D bits. Otherwise the A/D bits are dropped like before. Link: https://lkml.kernel.org/r/20220811161331.37055-6-peterx@redhat.com Signed-off-by: Peter Xu Reviewed-by: "Huang, Ying" Cc: Alistair Popple Cc: Andi Kleen Cc: Andrea Arcangeli Cc: David Hildenbrand Cc: Hugh Dickins Cc: "Kirill A . Shutemov" Cc: Minchan Kim Cc: Nadav Amit Cc: Vlastimil Babka Cc: Dave Hansen Signed-off-by: Andrew Morton

mm/swap: add swp_offset_pfn() to fetch PFN from swap entry

2022-09-27T02:46:05Z

We've got a bunch of special swap entries that stores PFN inside the swap offset fields. To fetch the PFN, normally the user just calls swp_offset() assuming that'll be the PFN. Add a helper swp_offset_pfn() to fetch the PFN instead, fetching only the max possible length of a PFN on the host, meanwhile doing proper check with MAX_PHYSMEM_BITS to make sure the swap offsets can actually store the PFNs properly always using the BUILD_BUG_ON() in is_pfn_swap_entry(). One reason to do so is we never tried to sanitize whether swap offset can really fit for storing PFN. At the meantime, this patch also prepares us with the future possibility to store more information inside the swp offset field, so assuming "swp_offset(entry)" to be the PFN will not stand any more very soon. Replace many of the swp_offset() callers to use swp_offset_pfn() where proper. Note that many of the existing users are not candidates for the replacement, e.g.: (1) When the swap entry is not a pfn swap entry at all, or, (2) when we wanna keep the whole swp_offset but only change the swp type. For the latter, it can happen when fork() triggered on a write-migration swap entry pte, we may want to only change the migration type from write->read but keep the rest, so it's not "fetching PFN" but "changing swap type only". They're left aside so that when there're more information within the swp offset they'll be carried over naturally in those cases. Since at it, dropping hwpoison_entry_to_pfn() because that's exactly what the new swp_offset_pfn() is about. Link: https://lkml.kernel.org/r/20220811161331.37055-4-peterx@redhat.com Signed-off-by: Peter Xu Reviewed-by: "Huang, Ying" Cc: Alistair Popple Cc: Andi Kleen Cc: Andrea Arcangeli Cc: David Hildenbrand Cc: Hugh Dickins Cc: "Kirill A . Shutemov" Cc: Minchan Kim Cc: Nadav Amit Cc: Vlastimil Babka Cc: Dave Hansen Signed-off-by: Andrew Morton

mm/swap: comment all the ifdef in swapops.h

2022-09-27T02:46:04Z

swapops.h contains quite a few layers of ifdef, some of the "else" and "endif" doesn't get proper comment on the macro so it's hard to follow on what are they referring to. Add the comments. Link: https://lkml.kernel.org/r/20220811161331.37055-3-peterx@redhat.com Signed-off-by: Peter Xu Suggested-by: Nadav Amit Reviewed-by: Huang Ying Reviewed-by: Alistair Popple Cc: Andi Kleen Cc: Andrea Arcangeli Cc: David Hildenbrand Cc: Hugh Dickins Cc: "Kirill A . Shutemov" Cc: Minchan Kim Cc: Vlastimil Babka Cc: Dave Hansen Signed-off-by: Andrew Morton

mm, hwpoison: use num_poisoned_pages_sub() to decrease num_poisoned_pages

2022-09-27T02:46:04Z

Use num_poisoned_pages_sub() to combine multiple atomic ops into one. Also num_poisoned_pages_dec() can be killed as there's no caller now. Link: https://lkml.kernel.org/r/20220830123604.25763-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin Acked-by: Naoya Horiguchi Signed-off-by: Andrew Morton

mm, hwpoison: make unpoison aware of raw error info in hwpoisoned hugepage

2022-08-09T01:06:44Z

Raw error info list needs to be removed when hwpoisoned hugetlb is unpoisoned. And unpoison handler needs to know how many errors there are in the target hugepage. So add them. HPageVmemmapOptimized(hpage) and HPageRawHwpUnreliable(hpage)) sometimes can't be unpoisoned, so skip them. Link: https://lkml.kernel.org/r/20220714042420.1847125-5-naoya.horiguchi@linux.dev Signed-off-by: Naoya Horiguchi Reported-by: kernel test robot Reviewed-by: Miaohe Lin Cc: David Hildenbrand Cc: Liu Shixin Cc: Mike Kravetz Cc: Muchun Song Cc: Oscar Salvador Cc: Yang Shi Signed-off-by: Andrew Morton

mm/migration: fix potential pte_unmap on an not mapped pte

2022-07-04T01:08:37Z

__migration_entry_wait and migration_entry_wait_on_locked assume pte is always mapped from caller. But this is not the case when it's called from migration_entry_wait_huge and follow_huge_pmd. Add a hugetlbfs variant that calls hugetlb_migration_entry_wait(ptep == NULL) to fix this issue. Link: https://lkml.kernel.org/r/20220530113016.16663-5-linmiaohe@huawei.com Fixes: 30dad30922cc ("mm: migration: add migrate_entry_wait_huge()") Signed-off-by: Miaohe Lin Suggested-by: David Hildenbrand Reviewed-by: David Hildenbrand Cc: Alistair Popple Cc: Christoph Hellwig Cc: Christoph Lameter Cc: David Howells Cc: Huang Ying Cc: kernel test robot Cc: Mike Kravetz Cc: Muchun Song Cc: Oscar Salvador Cc: Peter Xu Signed-off-by: Andrew Morton

mm/swapfile: unuse_pte can map random data if swap read fails

2022-05-27T16:33:45Z

Patch series "A few fixup patches for mm", v4. This series contains a few patches to avoid mapping random data if swap read fails and fix lost swap bits in unuse_pte. Also we free hwpoison and swapin error entry in madvise_free_pte_range and so on. More details can be found in the respective changelogs. This patch (of 5): There is a bug in unuse_pte(): when swap page happens to be unreadable, page filled with random data is mapped into user address space. In case of error, a special swap entry indicating swap read fails is set to the page table. So the swapcache page can be freed and the user won't end up with a permanently mounted swap because a sector is bad. And if the page is accessed later, the user process will be killed so that corrupted data is never consumed. On the other hand, if the page is never accessed, the user won't even notice it. Link: https://lkml.kernel.org/r/20220519125030.21486-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220519125030.21486-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin Acked-by: David Hildenbrand Cc: Hugh Dickins Cc: Matthew Wilcox (Oracle) Cc: Vlastimil Babka Cc: David Howells Cc: NeilBrown Cc: Alistair Popple Cc: Suren Baghdasaryan Cc: Peter Xu Cc: Ralph Campbell Cc: Naoya Horiguchi Signed-off-by: Andrew Morton