user/sven/linux.git/include/linux/tcp.h, branch v6.5.11

tcp: annotate data-races around fastopenq.max_qlen

2023-07-20T19:34:18Z

This field can be read locklessly. Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner") Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com Signed-off-by: Jakub Kicinski

tcp: preserve const qualifier in tcp_sk()

2023-03-18T12:23:34Z

We can change tcp_sk() to propagate its argument const qualifier, thanks to container_of_const(). We have two places where a const sock pointer has to be upgraded to a write one. We have been using const qualifier for lockless listeners to clearly identify points where writes could happen. Add tcp_sk_rw() helper to better document these. tcp_inbound_md5_hash(), __tcp_grow_window(), tcp_reset_check() and tcp_rack_reo_wnd() get an additional const qualififer for their @tp local variables. smc_check_reset_syn_req() also needs a similar change. Signed-off-by: Eric Dumazet Reviewed-by: Simon Horman Signed-off-by: David S. Miller

tcp: add u32 counter in tcp_sock and an SNMP counter for PLB

2022-10-28T09:47:42Z

A u32 counter is added to tcp_sock for counting the number of PLB triggered rehashes for a TCP connection. An SNMP counter is also added to count overall PLB triggered rehash events for a host. These counters are hooked up to PLB implementation for DCTCP. TCP_NLA_REHASH is added to SCM_TIMESTAMPING_OPT_STATS that reports the rehash attempts triggered due to PLB or timeouts. This gives a historical view of sustained congestion or timeouts experienced by the TCP connection. Signed-off-by: Mubashir Adnan Qureshi Signed-off-by: Yuchung Cheng Signed-off-by: Neal Cardwell Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-10-04T00:44:18Z

Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski

tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited

2022-09-30T11:37:45Z

This commit fixes a bug in the tracking of max_packets_out and is_cwnd_limited. This bug can cause the connection to fail to remember that is_cwnd_limited is true, causing the connection to fail to grow cwnd when it should, causing throughput to be lower than it should be. The following event sequence is an example that triggers the bug: (a) The connection is cwnd_limited, but packets_out is not at its peak due to TSO deferral deciding not to send another skb yet. In such cases the connection can advance max_packets_seq and set tp->is_cwnd_limited to true and max_packets_out to a small number. (b) Then later in the round trip the connection is pacing-limited (not cwnd-limited), and packets_out is larger. In such cases the connection would raise max_packets_out to a bigger number but (unexpectedly) flip tp->is_cwnd_limited from true to false. This commit fixes that bug. One straightforward fix would be to separately track (a) the next window after max_packets_out reaches a maximum, and (b) the next window after tp->is_cwnd_limited is set to true. But this would require consuming an extra u32 sequence number. Instead, to save space we track only the most important information. Specifically, we track the strongest available signal of the degree to which the cwnd is fully utilized: (1) If the connection is cwnd-limited then we remember that fact for the current window. (2) If the connection not cwnd-limited then we track the maximum number of outstanding packets in the current window. In particular, note that the new logic cannot trigger the buggy (a)/(b) sequence above because with the new logic a condition where tp->packets_out > tp->max_packets_out can only trigger an update of tp->is_cwnd_limited if tp->is_cwnd_limited is false. This first showed up in a testing of a BBRv2 dev branch, but this buggy behavior highlighted a general issue with the tcp_cwnd_validate() logic that can cause cwnd to fail to increase at the proper rate for any TCP congestion control, including Reno or CUBIC. Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler") Signed-off-by: Neal Cardwell Signed-off-by: Kevin(Yudong) Yang Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself

2022-09-29T16:25:47Z

When a bad bpf prog '.init' calls bpf_setsockopt(TCP_CONGESTION, "itself"), it will trigger this loop: .init => bpf_setsockopt(tcp_cc) => .init => bpf_setsockopt(tcp_cc) ... ... => .init => bpf_setsockopt(tcp_cc). It was prevented by the prog->active counter before but the prog->active detection cannot be used in struct_ops as explained in the earlier patch of the set. In this patch, the second bpf_setsockopt(tcp_cc) is not allowed in order to break the loop. This is done by using a bit of an existing 1 byte hole in tcp_sock to check if there is on-going bpf_setsockopt(TCP_CONGESTION) in this tcp_sock. Note that this essentially limits only the first '.init' can call bpf_setsockopt(TCP_CONGESTION) to pick a fallback cc (eg. peer does not support ECN) and the second '.init' cannot fallback to another cc. This applies even the second bpf_setsockopt(TCP_CONGESTION) will not cause a loop. Signed-off-by: Martin KaFai Lau Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20220929070407.965581-5-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov

net: add skb_[inner_]tcp_all_headers helpers

2022-07-02T15:22:25Z

Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

net/smc: Limit SMC visits when handshake workqueue congested

2022-02-11T11:14:58Z

This patch intends to provide a mechanism to put constraint on SMC connections visit according to the pressure of SMC handshake process. At present, frequent visits will cause the incoming connections to be backlogged in SMC handshake queue, raise the connections established time. Which is quite unacceptable for those applications who base on short lived connections. There are two ways to implement this mechanism: 1. Put limitation after TCP established. 2. Put limitation before TCP established. In the first way, we need to wait and receive CLC messages that the client will potentially send, and then actively reply with a decline message, in a sense, which is also a sort of SMC handshake, affect the connections established time on its way. In the second way, the only problem is that we need to inject SMC logic into TCP when it is about to reply the incoming SYN, since we already do that, it's seems not a problem anymore. And advantage is obvious, few additional processes are required to complete the constraint. This patch use the second way. After this patch, connections who beyond constraint will not informed any SMC indication, and SMC will not be involved in any of its subsequent processes. Link: https://lore.kernel.org/all/1641301961-59331-1-git-send-email-alibuda@linux.alibaba.com/ Signed-off-by: D. Wythe Signed-off-by: David S. Miller

tcp: expose __tcp_sock_set_cork and __tcp_sock_set_nodelay

2021-12-07T19:36:30Z

Expose __tcp_sock_set_cork() and __tcp_sock_set_nodelay() for use in MPTCP setsockopt code -- namely for syncing MPTCP socket options with subflows inside sync_socket_options() while already holding the subflow socket lock. Acked-by: Paolo Abeni Acked-by: Matthieu Baerts Signed-off-by: Maxim Galaganov Signed-off-by: Mat Martineau Signed-off-by: Jakub Kicinski

tcp: add TTL to SCM_TIMESTAMPING_OPT_STATS

2021-01-23T02:20:52Z

This patch adds TCP_NLA_TTL to SCM_TIMESTAMPING_OPT_STATS that exports the time-to-live or hop limit of the latest incoming packet with SCM_TSTAMP_ACK. The value exported may not be from the packet that acks the sequence when incoming packets are aggregated. Exporting the time-to-live or hop limit value of incoming packets helps to estimate the hop count of the path of the flow that may change over time. Signed-off-by: Yousuk Seung Signed-off-by: Eric Dumazet Signed-off-by: Neal Cardwell Link: https://lore.kernel.org/r/20210120204155.552275-1-ysseung@google.com Signed-off-by: Jakub Kicinski