user/sven/linux.git/include/linux/thunderbolt.h, branch v5.6.10

thunderbolt: Add support for Intel Ice Lake

2019-08-26T09:15:06Z

The Thunderbolt controller is integrated into the Ice Lake CPU itself and requires special flows to power it on and off using force power bit in NHI VSEC registers. Runtime PM (RTD3) and Sx flows also differ from the discrete solutions. Now the firmware notifies the driver whether RTD3 entry or exit are possible. The driver is responsible of sending Go2Sx command through link controller mailbox when system enters Sx states (suspend-to-mem/disk). Rest of the ICM firwmare flows follow Titan Ridge. Signed-off-by: Raanan Avargil Signed-off-by: Mika Westerberg Reviewed-by: Yehezkel Bernat Tested-by: Mario Limonciello

thunderbolt: Add XDomain UUID exchange support

2019-04-18T08:18:53Z

Currently ICM has been handling XDomain UUID exchange so there was no need to have it in the driver yet. However, since now we are going to add the same capabilities to the software connection manager it needs to be handled properly. For this reason modify the driver XDomain protocol handling so that if the remote domain UUID is not filled in the core will query it first and only then start the normal property exchange flow. Signed-off-by: Mika Westerberg

thunderbolt: Convert rest of the driver files to use SPDX identifier

2018-10-02T22:52:08Z

This gets rid of the licence boilerplate duplicated in each file. While there fix doubled space in domain.c author line. No functional changes intended. Signed-off-by: Mika Westerberg Acked-by: Yehezkel Bernat Signed-off-by: Greg Kroah-Hartman

thunderbolt: Introduce USB only (SL4) security level

2018-03-09T09:54:11Z

This new security level works so that it creates one PCIe tunnel to the connected Thunderbolt dock, removing PCIe links downstream of the dock. This leaves only the internal USB controller visible. Display Port tunnels are created normally. While there make sure security sysfs attribute returns "unknown" for any future security level. Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko

thunderbolt: Add support for preboot ACL

2018-03-09T09:54:11Z

Preboot ACL is a mechanism that allows connecting Thunderbolt devices boot time in more secure way than the legacy Thunderbolt boot support. As with the legacy boot option, this also needs to be enabled from the BIOS before booting is allowed. Difference to the legacy mode is that the userspace software explicitly adds device UUIDs by sending a special message to the ICM firmware. Only the devices listed in the boot ACL are connected automatically during the boot. This works in both "user" and "secure" security levels. We implement this in Linux by exposing a new sysfs attribute (boot_acl) below each Thunderbolt domain. The userspace software can then update the full list as needed. Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko

thunderbolt: Add tb_xdomain_find_by_route()

2018-03-09T09:54:10Z

This is needed by the new ICM interface to find xdomains by route string instead of link and depth. While there update existing tb_xdomain_find_* functions to use tb_xdomain_get() instead of open-coding the same. Signed-off-by: Radion Mirchevsky Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko

thunderbolt: Add function to retrieve DMA device for the ring

2017-10-02T18:24:41Z

This is needed when Thunderbolt service drivers need to DMA map memory before it is passed down to the ring. Signed-off-by: Mika Westerberg Reviewed-by: Michael Jamet Reviewed-by: Yehezkel Bernat Reviewed-by: Andy Shevchenko Signed-off-by: David S. Miller

thunderbolt: Add polling mode for rings

2017-10-02T18:24:41Z

In order to support things like networking over Thunderbolt cable, there needs to be a way to switch the ring to a mode where it can be polled with the interrupt masked. We implement such mode so that the caller can allocate a ring by passing pointer to a function that is then called when an interrupt is triggered. Completed frames can be fetched using tb_ring_poll() and the interrupt can be re-enabled when the caller is finished with polling by using tb_ring_poll_complete(). Signed-off-by: Mika Westerberg Reviewed-by: Michael Jamet Reviewed-by: Yehezkel Bernat Reviewed-by: Andy Shevchenko Signed-off-by: David S. Miller

thunderbolt: Use spinlock in NHI serialization

2017-10-02T18:24:41Z

This is needed because ring polling functionality can be called from atomic contexts when networking and other high-speed traffic is transferred over a Thunderbolt cable. Signed-off-by: Mika Westerberg Reviewed-by: Michael Jamet Reviewed-by: Yehezkel Bernat Reviewed-by: Andy Shevchenko Signed-off-by: David S. Miller

thunderbolt: Use spinlock in ring serialization

2017-10-02T18:24:41Z

This makes it possible to enqueue frames also from atomic context which is needed for example, when networking packets are sent over a Thunderbolt cable. Signed-off-by: Mika Westerberg Reviewed-by: Michael Jamet Reviewed-by: Yehezkel Bernat Reviewed-by: Andy Shevchenko Signed-off-by: David S. Miller